Investigation of a standard gate valve in terms of flow rate, opening distance and wedge angle with CFD

Year 2024, Volume: 10 Issue: 5, 1306 - 1322, 10.09.2024

Soner Enekçi , Üsame Demir , Kadir Yılmaz

Abstract

Gate valves provide sealing with metal-to-metal friction. When the right interior parts are selected, and the production is not made according to the proper design criteria, internal leaks occur in the valves in the medium term. Considering the ideal pressure, velocity equations and designs suitable for the process can be realized by determining the nominal pressure and velocity curves. This study designed a standard gate valve with 8-inch connection dimensions. Computational Fluid Dynamics (CFD) method investigated split, flexible, and solid wedge types of the designed valve, 0.5, 1, and 2 m/s flow velocities for zero, four and five-degree wedge closing angles and 20 mm, 40 mm, 60 mm, 90 mm, and 120 mm opening wedge positions. Ansys Fluent software was used for the analyses. Mesh optimization was performed for the ideal mesh number and analyzed according to the ideal mesh number. The k-Epsilon turbulence model was used for simulations. The same situations were repeated for a parallel wedge (0-degree wedge seating angle). The lowest pressure distribution and pressure loss occurred in the parallel wedge compared to the opening position of other types of wedges. The best gate type obtained from the analysis results was determined, and an experimental tightness test was performed. It can be said that the soft seat gate valve, designed according to the results of the sealing test, gives approximately 2.5 times more opening-closing life than the metal gate valve, thus reducing the maintenance-repair costs.

Keywords

CFD Analysis, Gate Valve, Pressure Drop, Wedge Angle

References

• [1] Weibel DB, Kruithof M, Potenta S, Sia SK, Lee A, Whitesides GM. Torque-actuated valves for microfluidics. Anal Chem 2005;77:4726–4733. [CrossRef]
• [2] Tabrizi AS, Asadi M, Xie G, Lorenzini G, Biserni C. Computational fluid-dynamics-based analysis of a ball valve performance in the presence of cavitation. J Engineer Thermophys 2014;23:27–38. [CrossRef]
• [3] Manahan GJ. Gate valve design and application. Sewage Ind Wastes 1956;28:225–231.
• [4] Wheeler WR. Recent developments in metal-sealed gate valves. J Vac Sci Technol 1998;13:503–506. [CrossRef]
• [5] Aslanov JN, Mammadov KS. Design and performance analysis of improved valve construction being used in oil and gas industry. Int J Tech Phys Probl Engineer 2022;14:98–103.
• [6] Larsen CG, Johnson LE, Mosiman LG. Gripping techniques and concerns for mechanical testing of ultra-high temperature materials. Ultra High Temp Mech Test 1995:35–50. [CrossRef]
• [7] Panciroli R, Abrate S, Minak G. Dynamic response of flexible wedges entering the water. Compos Struct 2013;99:163–171. [CrossRef]
• [8] Anderson CN, Bosserman BE, Morris CD, Cadrecha C, Lescovich JE, Taylor HW, et al. Valves. In: Jones GM, Sanks RL, Tchobanoglous G, Bosserman BE, eds. Pumping Station Design. Oxford: Butterworth-Heinemann; 2008. [CrossRef]
• [9] Tverskoy MM, Andrianov VN, Sokolov AV. Creating new generation of actuators for shut-off and control ball valves with double-gate. Procedia Engineer 2017;206:1303–1308. [CrossRef]
• [10] Zakirnichnaya MM, Kulsharipov IM. Wedge gate valves selected during technological pipeline systems designing service life assessment. Procedia Engineer 2017;206:1831–1838. [CrossRef]
• [11] Bakic G, Zeravcic VS, Djukic MB, Perunicic V, Prodanovic A, Rajicic B, et al. Material characterization of the main steam gate valve made of X20CrMoV 12.1 steel after long term service. Procedia Mater Sci 2014;3:1512–1517. [CrossRef]
• [12] Tripathy S, Das A, Sahu B, Srivastava DK. Electro-pneumatic variable valve actuation system for camless engine: Part I-development and characterization. Energy 2020;193:116740. [CrossRef]
• [13] Battini D, Donzella G, Avanzini A, Zenoni A, Ferrari M, Donzella A, et al. Experimental testing and numerical simulations for life prediction of gate valve O-rings exposed to mixed neutron and gamma fields. Mater Des 2018;156:514–527. [CrossRef]
• [14] Kim DW, Park SG, Kang SC, Kim YS. A study on the phenomenon of rate of loading in motor operated gate valves. Nucl Engineer Des 2010;240:957–962. [CrossRef]
• [15] Kim DW, Park SG, Lee SG, Kang SC. A study on a characteristic of stem friction coefficient for motor operated flexible wedge gate valve. Nucl Engineer Des 2009;239:1744–1749. [CrossRef]
• [16] Teodoro OMND, Moutinho AMC. Compact gate valve for UHV. Vacuum 2001;64:87–90. [CrossRef]
• [17] Qian J, Liu B, Lei L, Zhang H, Lu A, Wang JK, et al. Effects of orifice on pressure difference in pilot-control globe valve by experimental and numerical methods. Int J Hydrogen Energy 2016;41:18562–18570. [CrossRef]
• [18] Qian J, Gao Z, Wang JK, Jin ZJ. Experimental and numerical analysis of spring stiffness on flow and valve core movement in pilot control globe valve. Int J Hydrogen Energy 2017;42:17192–171201. [CrossRef]
• [19] Qian J, Wei L, Jin ZJ, Wang JK, Zhang H, Lu AL. CFD analysis on the dynamic flow characteristics of the pilot-control globe valve. Energy Conver Manage 2014;87:220–226. [CrossRef]
• [20] Alimonti C. Experimental characterization of globe and gate valves in vertical gas-liquid flows. Exp Therm Fluid Sci 2014;54:259–266. [CrossRef]
• [21] Paolinelli LD, Rashedi A, Yao J. Characterization of droplet sizes in large scale oil-water flow downstream from a globe valve. Int J Multiph Flow 2018;99:132–150. [CrossRef]
• [22] Prakash AS, Ram KS. Aeroacoustics analysis of globe control valves. Int J Automot Mech Engineer 2018;15:5547–5561. [CrossRef]
• [23] Mitrovic N, Petrovic A, Milosevic M, Momcilovic N, Miskovic Z, Maneski T, et al. Experimental and numerical study of globe valve housing. Hem Ind 2017;71:251–257. [CrossRef]
• [24] Ferrari JL. Measurement of the fluid flow load on a globe valve stem under various cavitation conditions. Available at: https://arxiv.org/abs/0909.0874. Accessed Aug 20, 2024.
• [25] Azam FI, Rani AMA, Altaf K, Zaharin HA. Experimental and numerical investigation of six-bar linkage application to bellow globe valve for compact design. Appl Sci 2018;8:1980. [CrossRef]
• [26] Lin Z, Sun X, Yu T, Zhang Y, Li Y, Zhu Z. Gas-solid two-phase flow and erosion calculation of gate valve based on the CFD-DEM model. Powder Technol 2020;366:395–407. [CrossRef]
• [27] Hu B, Zhu H, Ding K, Zhang Y, Yin B. Numerical investigation of conjugate heat transfer of an underwater gate valve assembly. Appl Ocean Res 2016;56:1–11. [CrossRef]
• [28] Borooghani B, Ashrafi A, Valeh H, Honarvar H. Failure analysis of a gate valve bonnet at wellhead facilities in sour gas service. Engineer Fail Anal 2020;108:104250. [CrossRef]
• [29] Farsi C, Amroune S, Moussaoui M, Mohamad B, Benkherbache H. High-gradient magnetic separation method for weakly magnetic particles: An industrial application. Metallofiz Nov Tekhnol 2019;41:1103–1119. [CrossRef]
• [30] Amroune S, Belaadi A, Menasri N, Zaoui M, Mohamad B, Amin H. New approach for computer-aided static balancing of turbines rotors. Diagnostyka 2019;20:95–101. [CrossRef]
• [31] Benkherbache H, Amroune S, Zaoui M, Menaseri N, Mohamad B, Silem M, et al. Characterization and mechanical behaviour of similar and dissimilar parts joined by rotary friction welding. Engineer Solid Mech 2020;9:23–30. [CrossRef]
• [32] Amroune S, Belaadi A, Zaoui M, Menasri N, Mohamad B, Saada K, et al. Manufacturing of rapid prototypes of mechanical parts using reverse engineering and 3D printing. J Serbian Soc Comput Mech 2021;15:167–176. [CrossRef]
• [33] Sai Chandra A, Nithish Reddy P, Kasaeian A. Natural ventilation in a large space with heat source: CFD visualization and taguchi optimization. J Therm Engineer 2022;8:642–655. [CrossRef]
• [34] Azeez K, Rahim A, Talib A, Ahmed RI, Kılıç M. Heat transfer enhancement for corrugated facing step channels using aluminium nitride nanofluid - Numerical investigation. J Therm Engineer 2022;8:734–747. [CrossRef]
• [35] Taskesen E, Tekir M, Gedik E, Arslan K. Numerical investigation of laminar forced convection and entropy generation of Fe3O4/water nanofluids in different cross-sectioned channel geometries. J Therm Engineer 2021;7:1752–1767. [CrossRef]
• [36] Berkache A, Boumehani A, Noura B, Kerfah R. Numerical investigation of 3D unsteady flow around a rotor of vertical axis wind turbine darrieus type H. J Therm Engineer 2022;8:691–701. [CrossRef]
• [37] Parkash O, Arora R. Flow characterization of multi-phase particulate slurry in thermal power plants using computational fluid dynamics. J Therm Engineer 2020;6:187–203. [CrossRef]
• [38] Abay K, Colak U, Yüksek L. Computational fluid dynamics analysis of flow and combustion of a diesel engine. J Therm Engineer 2017;4:1878–1895. [CrossRef]
• [39] Badra J, Viollet Y, Elwardany A, Im HG, Chang J. Physical and chemical effects of low octane gasoline fuels on compression ignition combustion. Appl Energy 2016;183:1197–1208. [CrossRef]
• [40] Ahmed SU, Arora R, Parkash O. Numerical investigations on flow characteristics of sand-water slurry through horizontal pipeline using computational fluid dynamics. J Therm Engineer 2020;6:140–151. [CrossRef]
• [41] Selimli S, Dumrul H, Yilmaz S, Akman O. Experimental and numerical analysis of energy and exergy performance of photovoltaic thermal water collectors. Sol Energy 2021;228:1–11. [CrossRef]
• [42] Moussa O, Driss Z. Numerical investigation of the turbulence models effect on the combustion characteristics in a non-premixed turbulent flame methane-air. Am J Energy Res 2017;5:85–93.
• [43] Wu H, Li JY, Gao Z. Flow characteristics and stress analysis of a parallel gate valve. Process 2019;7:803. [CrossRef]
• [44] Žic E, Banko P, Lešnik L. Hydraulic analysis of gate valve using computational fluid dynamics (CFD). Sci Rev Engineer Environ Stud 2020;29:275–288. [CrossRef]