Effects of decreasing grammage on the handsheet properties of unbeaten and beaten kraft pulps

Year 2016, Volume: 17 Issue: 1, 56 - 60, 28.03.2016

Sezgin Gülsoy , Zehra Hürfikir Betül Turgut

https://doi.org/10.18182/tjf.15900

Cited By: 2

Abstract

The aim of this study was to investigate the effects of decreasing grammage on handsheet properties of unbeaten (15 °SR) and beaten (35 °SR) kraft pulps of European aspen (Populus tremula L.) and maritime pine (Pinus pinaster Ait.). Six different basis weights from 100 g/m2 to 50 g/m2 (with 10 g/m2 intervals) were employed. Tensile index, TEA (tensile energy absorption), burst index, tear index, opacity, and apparent density of the handsheets gradually decreased with decreasing handsheet grammage. The decrease in strength properties that occurred with decreasing grammage was more evident in unbeaten pulps of both species than in beaten pulps. However, the effect of decreasing grammage on apparent density and opacity was more pronounced in beaten pulp handsheets of both species than in unbeaten pulp handsheets.
Keywords: Decreasing grammage, European aspen, Maritime pine, Kraft, Paper properties

Keywords

-

Dövülmüş ve dövülmemiş kraft hamurlarının kağıt özellikleri üzerine azalan gramajın etkileri

Abstract

Bu çalışmada, dövülmemiş (15 °SR) ve dövülmüş (35 °SR) titrek kavak (Populus tremula L.) ve sahil çamı (Pinus pinaster Ait.) kraft hamurlarından elde edilen deneme kağıtlarının özellikleri üzerine azalan kağıt gramajının etkileri belirlenmiştir. 100 g/m2’den 50 g/m2’ye kadar (10 g/m2 aralıklarla) 6 farklı gramajda kağıtların üretilmiştir. Kağıtların kopma indisi, TEA, patlama indisi, yırtılma indisi, opaklık ve yoğunluk değerleri azalan kağıt gramajı ile tedrici olarak azalmıştır. Hem titrek kavak hem de sahil çamı örneklerinde, azalan gramajla meydana gelen sağlamlık kayıplarının dövülmemiş hamurlarda dövülmüş hamurlara göre daha belirgin olduğu tespit edilmiştir. Fakat, kağıdın opaklığı ve yoğunluğu üzerine azalan gramajın etkisinin dövülmüş hamurlarda dövülmemiş hamurlara nazaran daha belirgin olduğu görülmüştür.
Anahtar kelimeler: Azalan gramaj, Titrek kavak, Sahil çamı, Kraft, Kağıt özellikleri

Keywords

Azalan gramaj, Titrek kavak, Sahil çamı, Kraft, Kağıt özellikleri

References

• Annergren, G., Hagen, N., 2009. Industrial beating/refining. In: Ek, M., Gellerstedt, G., Henriksson, G. (Eds.). Pulp and Paper Chemistry and Technology Vol. 3. Berlin: Walter de Gruyter, pp.121-136.
• Brandon, C.E., 1966. Effect of basis weight on folding endurance. Tappi Journal. 49, 233-235.
• Brännvall, E., Annergren, G., 2009. Pulp characterization. In: Ek, M., Gellerstedt, G., Henriksson, G. (Eds.). Pulp and Paper Chemistry and Technology Volume 2. Berlin: Walter de Gruyter, pp. 429-459.
• Burgess, W.H., 1970. Effect of basis weight on tensile strength. Tappi Journal, 53: 1680-1682.
• Casey, J.P., 1961. Pulp and Paper Chemistry and Chemical Technology Volume 2 Papermaking. New York: Interscience.
• Chen, Y., Wan, J., Zhang, X., Ma, Y., Wang, Y., 2012. Effect of beating on recycled properties of unbleached eucalyptus cellulose fiber. Carbohydrate Polymers, 87: 730-736.
• Girlanda, O., Fellers, C., 2007. Evaluation of the tensile stress-strain properties in the thickness direction of paper materials. Nordic Pulp and Paper Research, 22: 49-56.
• Gülsoy, S.K., Tüfek, S., 2013. Effect of chip mixing ratio of Pinus pinaster and Populus tremula on kraft pulp and paper properties. Industrial & Engineering Chemistry Research, 52: 2304-2308.
• Honkasalo, J., 2004. Behaviour of Different Furnish Mixtures in Mechanical Printing Papers. Espoo: Helsinki University of Technology, Laboratory of Paper Technology Reports Series A22.
• Hui, L., Liu, Z., Ni, Y., 2009. Characterization of high-yield pulp (HYP) by the solute exclusion technique. Bioresource Technology, 100: 6630-6634.
• I'Anson, S.J., Sampson, W.W., Savani, S., 2008. Density dependent influence of grammage on tensile properties of handsheets. Journal of Pulp and Paper Science, 34: 182-189.
• I'Anson, S.J., Sampson, W.W., Sevajee, C.R., 2007. New perspectives on the influence of formation and grammage on sheet strength. In: 93rd Annual Meeting- Pulp and Paper Technical Association of Canada, Montreal, pp.141-144.
• I'Anson, S.J., Sampson, W.W., 2007. Competing Weibull and stress-transfer influences on the specific tensile strength of a bonded fibrous network. Composites Science and Technology, 67: 1650-1658.
• Karademir, A., Imamoğlu, S., 2007. Effects of dry strength resin and surfactant addition on the paper made from pulps with different freeness level. Journal of Applied Sciences, 7: 484-488.
• Lumiainen, J., 2000. Refining of chemical pulp. in: Paulapuro, H. (Ed.). Papermaking, Part 1: Stock Preparation & Wet End. Atlanta: TAPPI Press, pp.87- 124.
• Mansfield, S.D., Kibblewhite, R.P., Riddell, M.J.C., 2004. Characterization of the reinforcement potential of different softwood kraft fibers in softwood/hardwood pulp mixtures. Wood and Fiber Science, 36: 344-358.
• Mohlin, U.B., 1992. Influence of grammage on sheet strength properties. In: Paper Physics Seminar Proceedings, Otaniemi, pp.1-12.
• Mutjé, P., Pèlach, M.A., Vilaseca, F., García, J.C., Jiménez, L., 2005. A comparative study of the effect of refining on organosolv pulp from olive trimmings and kraft pulp from eucalyptus wood. Bioresource Technology, 96: 1125-1129.
• Nazhad, M.M., Ramos, L.P., Paszner, L., Saddler, J.N., 1995. Structural constraints affecting the initial enzymatic hydrolysis of recycled paper. Enzyme and Microbial Technology, 17: 68-74.
• Nordstrom, B., 2003. Effects of grammage on sheet properties in one-sided and two-sided roll forming. Nordic Pulp and Paper Research, 18: 280-287.
• Nordstrom, B., Norman, B., 1995. Effects of grammage on paper properties for twin-wire roll forming of TMP. Journal of Pulp Paper Science, 21: J427-J431.
• Page, D.H., 1989. The beating of chemical pulps - The action and the effects. In: Papermaking Raw Materials: Transactions of the Ninth Fundamental Research Symposium Volume 1. London, pp.1-37.
• Rennel, J., 1969. Opacity in relation to strength properties of pulp. Part IV. The effect of beating and wet pressing. Pulp and Paper Magazine Canada, 70: T151-T158.
• Retulainen, E., Nieminen, K., 1996. Fibre properties as control variables in papermaking. Part 2. Strengthening interfibre bonds and reducing grammage: Paperi Ja Puu- Paper and Timber, 78: 305-312.
• Seth, R.S., Jantunen, J.T., Moss, C.S., 1989. The effect of grammage on sheet properties. Appita Journal, 42: 42- 48.
• Skowronski, J., 1991. Fibre-to-fibre bonds in paper. Part II. Measurement of the breaking energy of fibre-to-fibre bonds. Journal of Pulp and Paper Science, 17: J217- J222.
• Song, X., Law, K.N., 2010. Kraft pulp oxidation and its influence on recycling characteristics of fibres. Cellulose Chemistry and Technology, 44: 265-270.
• Sood, Y.V., Pande, P.C., Tyagi, S., Payra, I., Nisha Kulkarni, A.G., 2005. Quality improvement of paper from bamboo and hardwood furnish through fiber fractionation. Journal of Scientific and Industrial Research, 64: 299-305.
• Winters, U.W., Duffy, G.G., Kibblewhite, R.P., Riddell, M.J.C., 2002. Effect of grammage and concentration on paper sheet formation of Pinus radiata kraft pulps. Appita Journal, 5: 35-42.
• Xia, X., Gong, H., 2011. Effects of refining on the fiber properties of poplar APMP. Journal of Chemistry and Chemical Engineering, 5: 20-24.
• Zakrajšek, N., 2008. Influence of pulp properties on the adsorption of cationic starch. Tappi Journal, 7: 23-27.