Üç Boyutlu Yazıcıların Moda Tasarım Sürecine Entegrasyonu ve Örnek Sürdürülebilir Bir Uygulama

Abstract

Bu çalışma, mimariden tıbbi ekipman üretimine kadar birçok endüstride, eklemeli imalat olarak adlandırılan üç boyutlu baskının dönüştürücü potansiyelini kapsamlı bir şekilde anlatmaktadır. Çalışmanın odak noktası, geleneksel hazır giyim üretim yöntemlerinin yanı sıra moda üzerindeki devrim niteliğinde olan üç boyutlu tasarımların etkisinden oluşmaktadır. Moda tasarım alanında üç boyutlu baskı, yaratıcılığa olanak tanıyarak tasarımcıların kişiselleştirilmiş aksesuarları ve avangart tasarımları hassasiyetle oluşturmasını sağlamaktadır. Çalışma kapsamında gelişmiş üç boyutlu baskı teknolojisi ile sanatsal ifadenin birleşimini örnekleyen bir giysinin tasarımı yapılmıştır. Üç boyutlu baskı üretim teknolojileri, tasarımcıların ürettiği üç boyutlu tasarım örnekleri, üç boyutlu tasarım ile sürdürülebilirlik ilişkisi aktarılmıştır. Çalışmanın ikinci bölümünde ise üç boyutlu yazıcıdan çıkmış atık malzemelerin geri kazandırılması sağlanmış ve Simurg'un küllerinden yeniden doğmasından esinlenerek bir model tasarımı ve üretimi yapılmıştır. Böylece sürdürülebilir, teknoloji odaklı ve sanatsal bir giysi tasarımı ortaya konmuş ve üç boyutlu yazıcıların moda tasarım alanında daha fazla kullanılmasının önemi vurgulanmıştır.

Keywords

• üç boyutlu yazıcı
• üç boyutlu tasarım
• moda tasarımı
• model uygulama
• üç boyutlu baskı

Integration of Three-Dimensional Printers into the Fashion Design Process and an Exemplary Sustainable Application

Abstract

This article comprehensively describes the transformative potential of three-dimensional printing, called additive manufacturing, in many industries, from architecture to medical equipment manufacturing. The focus of the study consists of the impact of revolutionary three-dimensional designs on fashion, as well as traditional ready-made clothing production methods. In the field of fashion design, three-dimensional printing enables creativity, allowing designers to create personalized accessories and avant-garde designs with precision. Within the scope of the study, a garment was designed that exemplifies the combination of advanced three-dimensional printing technology and artistic expression. Three-dimensional printing production technologies, three-dimensional design examples produced by designers, and the relationship between three-dimensional design and sustainability are explained. In the second part of the study, the waste materials produced by the three-dimensional printer were recycled and a model was designed and produced inspired by the rebirth of Simurg from its ashes. Thus, a sustainable, technology-oriented and artistic clothing design was created and the importance of using three-dimensional printers more in the field of fashion design was emphasized.

Keywords

• three-dimensional printer
• three-dimensional design
• fashion design
• model application

References

1. Adlughmin. (2014). The “Synapse Dress”: Intuitive 3D printed wearable body response dress by Anouk Wipprecht. 3Dprint.com The Voice of 3D printing. (2014, September 11). https://3dprint.com/14852/synapse-dress-anouk-wipprecht/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
2. Arjmandi, H., Tahir, M., Shabankareh, H., Shabani, M. & Mazaheri, F. (2011). Psychological and spiritual effects of light and color from Iranian traditional houses on dwellers. Journal of Social Sciences and Humanities, 6(2), 288-301.
3. Bingham, G., Hague, R., Tuck, C., Long, A., Crookstan, J. & Sherburn, M. (2007). Rapid Manufactured Textiles. International Journal of Computer Integrated Manufacturing, 96-105.
4. Bloomfield, M., Borstrock, S. (2018). Modeclix. The additively manufactured adaptable textile. Materials Today Communications, Vol. 16, 212-216. https://doi.org/10.1016/j.mtcomm.2018.04.002
5. Casas, N. (2013). Smoke Dress. 2013 September. https://www.niccolocasas.com/: https://www.niccolocasas.com/SMOKE-DRESS adresinden alındı
6. Chen, S., Huang, T., Qian, S., Guo, Y., Sun, L., Lei, D., … You, Z. (2018). A single integrated 3D‐printing process customizes elastic and sustainable triboelectric nanogenerators for wearable electronics. Advanced Functional Materials, 1805108-1805116.
7. Delaney, A. (2013). 3D-Printed Fashion Collection: Melinda Looi And Samuel Canning Make Waves. i.materialise, 3D printing blog https://i.materialise.com/blog/en/melinda-looi-makes-waves-with-new-3d-printed-fashion-collection/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
8. Demir, E., Ayranpınar, S. K. (2024). “3B Yazıcıların Tekstil ve Moda Sektöründe Kullanımına. Turkish Journal of Fashion Design and Management (TJFDM), 6(1), 23-44.

9. Derringer, J. (2011). Cutting-Edge Fashion by Daniel Widrig and Iris van Herpen. Design-milk. 2011, March 08. https://design-milk.com/cutting-edge-fashion-by-daniel-widrig-and-iris-van-herpen/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
10. Design & Art Magazine. (2022). Iris van Herpen: Mythology and the Metaverse. Design & Art Magazine. (2022, July 26) https://www.designartmagazine.com/2022/07/iris-van-herpen-autumn-winter-22-23.html?utm_source=chatgpt.com adresinden alındı (Erişim tarihi: 15 Nisan 2024)
11. Dhuru, R. (2015). 3D-Printed Fashion: 10 Amazing 3D-Printed Dresses. https://i.materialise.com: https://i.materialise.com/blog/en/3d-printed-fashion-dresses/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
12. Doubrovski, Z., Stokhuijzen, D., Aberle, N., Herpen, I., Schuddeboom, P., & Verlinden, J. (2018). Fabricating the foliage dress: computational design in couture. Proceedings of SCF, 1-2.
13. Düzgün, D. E. ve Çetinkaya, K. (2019). Moda alanında 3 boyutlu baskı teknolojileri. Internatıonal Journal of 3D Printing Technologies and Digital Industry, 19-31.
14. Erener, Ş., & Boz, S. (2021). Modern üretim tekniklerinde eklemeli imalat sistemlerinin yeri ve kullanım alanları. Turkish Journal of Fashion Design and Management, 47-56.
15. Etherington, R. (2010, August 11). Crystallization by Iris van Herpen, Daniel Widrig and .MGX by Materialise. dezeen: https://www.dezeen.com/2010/08/11/crystallization-by-iris-van-herpen-daniel-wright-and-mgx-by-materialise/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
16. Farahi, B. (2016). Caress of the gaze: A gaze actuated 3D printed body architecture. 36th Annual Conference of the Association for Computer Aided Design in Architecture (s. 27-29). Ann Arbor, MI, USA: 36th Annual Conference of the Association for Computer Aided Design in Architecture.
17. Farahi, B. (n.d.). Behnaz Farahi Arhitecture, Fashion & Interactive Design. https://behnazfarahi.com/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
18. Fisher, M. (2018, May 11). Simurgh, the Mysterious Giant Healing Bird in Iranian Mythology. Ancient Origins: https://www.ancient-origins.net/history/simurgh-mysterious-giant-healing-bird-iranian-mythology-0010030 adresinden alındı (Erişim tarihi: 15 Nisan 2024)
19. Fitch, T. (2016). Harmonograph Dress. 3dprintedart.stratasys.com. https://3dprintedart.stratasys.com/ fashion/harmonograph-dress adresinden alındı (Erişim tarihi: 15 Nisan 2024)
20. Gao, T., yang, Z., Chen, C., Li, Y., Fu, K., Dai, J., . . . Hu, L. (2017). Three-Dimensional Printed Thermal Regulation Textiles. ACS nano, 11513-11520.
21. Ghahremani, H. A. (1984, June/July). Simorgh -- An Old Persian Fairy Tale. https://www.theosophy-nw.org/theosnw/world/mideast/mi-homa.htm adresinden alındı
22. Gürcüm, B., Börklü, H., Sezer, H., & Eren, O. (2018). Implementing 3D printed structures as the newest textile form. Journal of Fashion Technology Textile Engineering.
23. Herpen van I. (n.d.). Iris van Herpen. https://www.irisvanherpen.com/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
24. Jin, Y., Campbell, R., Tang, J., Ji, H., Song, D., ve Liu, X. (2021). Designing and simulating a “mass selective customization-centralized manufacturing” business model for clothing enterprises using 3D printing. Rapid Prototyping Journal, 1664-1680.
25. Kabukcu, E. (2018). Tüketici Odaklı Akıllı Giysi Tasarımı için Yeni bir Bütünleşik Model Öneris. Journal of Engineering Sciences and Design, 143–147.
26. Khajavi, S. H. (2021). Additive manufacturing in the clothing industry: Towards sustainable new business models. Applied sciences, 8994.
27. Khan R. (2024). foraeva's 3D printed textiles reimagine traditional romanian motifs through code. Designboom. 2024, February 8. https://www.designboom.com/technology/foraeva-3d-printed-textiles-ancient-romanian-motifs-code-heritage-recoded-02-08-2024/?utm_source=chatgpt.com adresinden alındı (Erişim tarihi: 15 Nisan 2024)
28. Koerner, J. (2014). Biopiracy dress. juliakoerner.com. https://www.juliakoerner.com/biopiracy adresinden alındı (Erişim tarihi: 15 Nisan 2024)
29. Koerner, J. (n.d.). Julia Koerner Vienna Los Angeles. https://www.juliakoerner.com/about-biography adresinden alındı (Erişim tarihi: 15 Nisan 2024)
30. Koerner, J. (n.d.). Julia Koerner. https://www.juliakoerner.com/ adresinden alındı
31. Korger, M., Glogowsky, A., Sandul, S., Steinem, C., Huysman, S., Horn, B., . . . Rabe, M. (2020). Testing thermoplastic elastomers selected as flexible three-dimensional printing materials for functional garment and technical textile applications. Journal of Enjeenered Fibers and Fabrics, 1-10.
32. Lekeckas, K., Stirbe, J., Ancutiene, K., ve Valusyte, R. (2023). Testing of 3D printing on textile fabrics for garments application within circular design. International Journal of Clothing Science and Technology, 627-647.
33. Li, Y., Lee, Y.-A. (2022). The Potential Use of PLA and Soft PLA in 3D Printing for Sustainable Wearables. International Textile and Apparel Association Annual Conference Proceedings. Iowa State University Digital Press.
34. Lim, H. (2017). Development of 3D printed shoe designs using traditional muntin patterns. Fashion & Textile Research Journal, 134-139.
35. Madhu, N., Erfani, H., Jadoun, S., Amir, M., Thiagarajan, Y., ve Chauhan, N. (2022). Fused deposition modelling approach using 3d printing and recycled industrial materials for a sustainable environment: a review. The International Journal of Advanced Manufacturing Technology, 2125-2138.
36. Madhuri, M. (2014). Wanderers by Neri Oxman: 3D printed Wearables. https://www.re-thinkingthefuture.com/: https://www.re-thinkingthefuture.com/case-studies/a3678-wanderers-by-neri-oxman-3d-printed-wearables/ adresinden alındı
37. Manuscriptevidence. (2020). Simurgh and Zaal from a persian Shahnameh. Research group on manuscript evidence: (2020, May 7). https://manuscriptevidence.org/wpme/simurgh-and-zal-from-a-Simurghpersian-shahnameh/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
38. Melnikova, R., Ehrmann, A., ve Finsterbusch, K. (2014). 3D printing of textile-based structures by Fused Deposition Modelling (FDM) with different polymer materials. IOP conference series: materials science and engineering, 012018.
39. Mikula, K., Skrzypczak, D., Izydorczyk, G., Warcho, J., Moustakas, K., Chojnacka, K., ve Witek-Krowaik, A. (2020). 3D printing filament as a second life of waste plastics—a review. Environmental Science and Pollution Research, 12321-12333.
40. Namiri, M. E. (2017). Symbolic Meaning of Colors in Traditional Mosques. (Master's thesis, Eastern Mediterranean University EMU-Doğu Akdeniz Üniversitesi (DAÜ)).
41. Pasricha, A., Greeninger, R. (2018). Exploration of 3D printing to create zero-waste sustainable fashion notions and jewelry. Fashion and Textiles, 5(30), 1-18. https://doi.org/10.1186/s40691-018-0152-2
42. Peleg, D. (2016). Paralympics dress. danitpeleg.com https://danitpeleg.com/paralympics-dress/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
43. Polygenis, T. (2024). PLA vs ABS vs PETG: A Comparison of 3D printing filaments. wevolver. (2024, August 30). https://www.wevolver.com/article/comparison-of-pla-abs-and-petg-filaments-for-3d-printing?utm_source=chatgpt.com adresinden alındı (Erişim tarihi: 30 Aralık 2024)
44. Sharma, A., ve Jha, A. (2023). Application of biopolymers in clothing and fashion. International Journal of Pharma Professional’s Research (IJPPR), 1-21.
45. Sharma, R. (2013, December 6). Lady Gaga goes Gaga over 3D printing. https://www.forbes.com/: https://www.forbes.com/sites/rakeshsharma/2013/12/06/lady-gaga-goes-gaga-over-3d-printing/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
46. Sheikh, S. Z. (2017). persian allegory of chinoiserie motifs-dragon and phoneix or simurgh. international journal of multidisciplinary and current research, 939-949.
47. Simon. (2014). This 3D printed robotic spider dress is perfect for somebody who needs 'space'. www.3ders.org. (2014, December 23). https://www.3ders.org/articles/20141223-this-3d-printed-robotic-spider-dress-is-perfect-for-somebody-who-needs-space.html adresinden alındı (Erişim tarihi: 15 Nisan 2024)
48. Soliwal, T. (2024). Fashion Tech: How Technology is Shaping the Future of Apparel. FF Fibre2Fashion. (2024, January). https://www.fibre2fashion.com/industry-article/9886/fashion-tech-how-technology-is-shaping-the-future-of-apparel adresinden alındı (Erişim tarihi: 15 Nisan 2024)
49. Sonjaya, M., Mutmainnah, M., ve Hidayat, M. (2022). Construction of plastic waste extruding machine to produce filaments of 3D printing machine. International Journal of Mechanics, Vol. 16, 82-90. https://doi.org/10.46300/9104.2022.16.10
50. Sun, D., Valtas, A. (2016). 3D printing for garments production: An exploratory study. Journal of Fashion Technology and Textile Engineering, 1000139.
51. Taylor, A., Unver, E. (2014). 3D Printing-Media Hype or Manufacturing Reality: Textiles Surface Fashion Product Architecture. In Textiles Society Lecture; Textile Centre of Excellence. huddersfield, UK.
52. Wikipedia Contributors. (n.d.). Phoenix (mythology). Wikipedia içinde. https://en.wikipedia.org/wiki/Phoenix_(mythology) adresinden alındı (Erişim tarihi: 15 Nisan 2024)
53. Williamson, C. (2014). Francis Bitonti’s 3D printed dress you can print at home. https://design-milk.com/. (2014, July 4). https://design-milk.com/francis-bitontis-3d-printed-dress-can-print-home/ adresinden alındı (Erişim tarihi: 15 Nisan 2024)
54. Zaimoğlu, Ö., Yıldıran, M. (2017). Moda Tasarımında İnovatif Bir Yöntem: Üç Boyutlu Yazıcılar ile Giysi Tasarımı Uygulamaları. İdil Sanat ve Dil Dergisi, 2949-2976