Designing Generalized Cylinder with Characteristic Base Curve in Euclidean 3-space

Abstract

Designing a surface from a given curve under some special conditions is an important problem in many practical applications. The purpose of this article is to design a generalized cylinder whose base curve is a characteristic curve in Euclidean 3- space. The main results show that the generalized cylinder with geodesic, line of curvature, or asymptotic base curve is a rectifying cylinder, a right cylinder, or a plane respectively.

Keywords

• Generalized cylinder
• ruled surface
• geodesic
• line of curvature
• asymptotic

References

1. Al-Ghefaria, R. A., Rashad, A. B., An Approach for Designing a Developable Surface with a Common Geodesic Curve, International Journal of Contemporary Mathematical Sciences, 8(18)(2013), 875–891.
2. Althibany, N. M., Classification of Ruled Surfaces Family with Common Characteristic Curve in Euclidean 3-space, Turkish Journal of Science, 6(2)(2021), 61–70.
3. Althibany, N. M., Construction of Developable Surface with Geodesic or Line of Curvature Coordinates, Journal of New Theory, 36(2021), 75–87.
4. Althibany, N.M., Generating generalized cylinder with geodesic base curve according to Darboux frame, Journal of New Theory, 37(2021), 99-107.
5. Bayram, E., Bilici, M., Surface family with a common involute asymptotic curve, International Journal of Geometric Methods in Modern Physics, 13(05)(2016), 1650062.
6. Bayram, E., Güler, F., Kasap, E., Parametric representation of a surface pencil with a common asymptotic curve, Computer-Aided Design, 44(2012), 637–643.
7. Bilici M., Bayram, E., Surface construction with a common involute line of curvature, Int. J. Open Problems Compt. Math, 14(2)(2021).
8. Bo, P., Wang, W., Geodesic-controlled developable surfaces for modeling paper bending, Comput. Graph. Forum, 26(2007), 365–374.

9. Carmo, M.D., Differential Geometry of Curves and Surfaces, Prentice-Hall, New Jersey, 1976.
10. Chang, K.H., Product design modeling using CAD/CAE, the computer aided engineering design series, Academic Press, 2014.
11. Georgiev, G.H., Dinkova, C. L., Focal curves of geodesics on generalized cylinders, ARPN J. of Engineering and Applied Sciences, 14(11)(2019), 2058–2068.
12. Goldman, R. An integrated introduction to computer graphics and geometric modeling, CRC Press, 2009. 1
13. Guha, S., Computer graphics through OpenGL: From theory to experiments, Chapman and Hall/CRC, 2018.
14. Helmut, P., Andreas, A., Michael, H., Axel, K., Architectural geometry, Bentley Institute Press, 2007.
15. Honda, S., Rectifying developable surfaces of framed base curves and framed helices, Adv. Stud. Pure Math. 78(2018), 273–292.
16. Honda, A., Naokawa, K., Saji, K., Umehara, M. and Yamada, K., Curved foldings with common creases and crease patterns, Advances in Applied Mathematics, 121(2020), 102083.
17. Izumiya, S., Katsumi, H., Yamasaki, T., The Rectifying Developable and the Spherical Darboux Image of a Space Curve, Banach Center Publ., 50(1999), 137–149.
18. Li, C. Y., Wang, R. H., Zhu, C. G., Parametric representation of a surface pencil with a common line of curvature, Comput Aided Des., 43(9)(2011), 1110–1117.
19. Li, C.Y.,Wang, R. H., Zhu, C. G., An approach for designing a developable surface through a given line of curvature, Computer-Aided Design, 45(3)(2013), 621–627.
20. Pressley, A.N., Elementary differential geometry , Springer Science & Business Media, 2010.
21. Shtogrin, M.I., Bending of a piecewise developable surface, Proceedings of the Steklov Institute of Mathematics, 275(2011), 133–154.
22. Struik, D.J., Lectures on classical dierential geometry, 2nd Edition, Dover Publications Inc., New York, 1988.
23. Wang, G.J., Tang, K., Tai, C.L., Parametric representation of a surface pencil with a common spatial geodesic, Computer-Aided Design, 36(5)(2004), 447–459.