Research Article
BibTex RIS Cite

Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact

Year 2017, Volume: 9 Issue: 3, 113 - 124, 26.12.2017
https://doi.org/10.29137/umagd.349964

Abstract

 The
repair technique of the composite patch with bonding adhesive are used with the
purpose of repairing materials and increasing working life of the materials. In
this study, the impact strength of notched metal materials repaired by
composite patch investigated by numerically. Fiber reinforced laminated
composite patch was modeled by using finite element model. Composite patch was
bonded to damaged materials, and this structure was subjected to impact test. The
geometrical and material non-linearities were considered in the explicit
dynamic analysis. The notched plate was made of aluminum 6061-T6. The effects of
design parameters, such as composite patch geometry, on the impact energy
absorption of the plates were investigated. The metal notched plates were
modeled as a Johnson-Cook material model and the composite patches were modeled
orthotropic elastic material model and Hashin damage. In the analysis results,
the damage mechanisms of composite patch were exhibited and strength of damaged
materials was exhibited in terms of contact force, kinetic energy and stress
distributions. The effect of patch geometries was also investigated in terms of
absorbing impact energies. As the plates without patch perforated, repaired
metal notched plates with composite patch did not perforate.

References

  • Mall, S. and Conley, D.S. (2009). Modeling and validation of composite patch repair to cracked thick and thin metallic panels. Composites: Part A, 40, 1331-1339. https://doi.org/10.1016/j.compositesa.2008.08.007.
  • Shams, S.S. and El-Hajjar, R.F. (2013). Overlay patch repair of scratch damage in carbon fiber/epoxy laminated composites. Composites: Part A, 49, 148-156, https://doi.org/10.1016/j.compositesa.2013.03.005.
  • Albedah, A., Khan, S.M.A., Benyahia, F. and Bouiadjra, B.B. (2016). Effect of load amplitude change on the fatigue life of cracked Al plate repaired with composite patch. International Journal of Fatigue, 88, 1-9, https://doi.org/10.1016/j.ijfatigue.2016.03.002.
  • Cheng, P., Gong, X.J., Aivazzadeh, S. and Xiao, X. (2014). Experimental observation of tensile behavior of patch repaired composites. Polymer Testing, 34, 146-154, https://doi.org/10.1016/j.polymertesting.2014.01.007.
  • Constantin, N., Sandu, M. and Sorohan, Ş. (2013). Restoration of the mechanical performance of damaged Al panels using bonded composite repair patches. International Journal of Adhesion & Adhesives, 42, 69-76, https://doi.org/10.1016/j.ijadhadh.2013.01.003.
  • Errouane, H., Sereir, Z. and Chateauneuf, A. (2014). Numerical model for optimal design of composite patch repair of cracked aluminum plates under tension. International Journal of Adhesion & Adhesives, 49, 64-72, https://doi.org/10.1016/j.ijadhadh.2013.12.004 .
  • Benyahia, F., Aminallah, L., Albedah, A., Bouiadjra, B.B. and Achour, T. (2015). Experimental and numerical analysis of bonded composite patch repair in aluminum alloy 7075 T6. Materials and Design, 73, 67-73, https://doi.org/10.1016/j.matdes.2015.02.009.
  • Sabelkin, V., Mall, S., Hansen, M.A., Vandawaker, R.M. and Derriso, M. (2007). Investigation into cracked aluminum plate repaired with bonded composite patch. Composite Structures, 79, 55-66, https://doi.org/10.1016/j.compstruct.2005.11.028.
  • ABAQUS/Explicit (Version 6.14), User’s manual, Finite Element Software. Available from: http://www.simulia. com.
  • Manes, A., Serpellini, F., Pagani, M., Saponara, M. and Giglio, M. (2014). Perforation and penetration of aluminium target plates by armour piercing bullets. International Journal of Impact Engineering, 69, 39-54, https://doi.org/10.1016/j.ijimpeng.2014.02.010.
  • Singh, H., Namala, K. K. and Mahajan, P. (2015). A damage evolution study of E-glass/epoxy composite under low velocity impact. Composites Part B,76, 235-248, https://doi.org/10.1016/j.compositesb.2015.02.016.
Year 2017, Volume: 9 Issue: 3, 113 - 124, 26.12.2017
https://doi.org/10.29137/umagd.349964

Abstract

References

  • Mall, S. and Conley, D.S. (2009). Modeling and validation of composite patch repair to cracked thick and thin metallic panels. Composites: Part A, 40, 1331-1339. https://doi.org/10.1016/j.compositesa.2008.08.007.
  • Shams, S.S. and El-Hajjar, R.F. (2013). Overlay patch repair of scratch damage in carbon fiber/epoxy laminated composites. Composites: Part A, 49, 148-156, https://doi.org/10.1016/j.compositesa.2013.03.005.
  • Albedah, A., Khan, S.M.A., Benyahia, F. and Bouiadjra, B.B. (2016). Effect of load amplitude change on the fatigue life of cracked Al plate repaired with composite patch. International Journal of Fatigue, 88, 1-9, https://doi.org/10.1016/j.ijfatigue.2016.03.002.
  • Cheng, P., Gong, X.J., Aivazzadeh, S. and Xiao, X. (2014). Experimental observation of tensile behavior of patch repaired composites. Polymer Testing, 34, 146-154, https://doi.org/10.1016/j.polymertesting.2014.01.007.
  • Constantin, N., Sandu, M. and Sorohan, Ş. (2013). Restoration of the mechanical performance of damaged Al panels using bonded composite repair patches. International Journal of Adhesion & Adhesives, 42, 69-76, https://doi.org/10.1016/j.ijadhadh.2013.01.003.
  • Errouane, H., Sereir, Z. and Chateauneuf, A. (2014). Numerical model for optimal design of composite patch repair of cracked aluminum plates under tension. International Journal of Adhesion & Adhesives, 49, 64-72, https://doi.org/10.1016/j.ijadhadh.2013.12.004 .
  • Benyahia, F., Aminallah, L., Albedah, A., Bouiadjra, B.B. and Achour, T. (2015). Experimental and numerical analysis of bonded composite patch repair in aluminum alloy 7075 T6. Materials and Design, 73, 67-73, https://doi.org/10.1016/j.matdes.2015.02.009.
  • Sabelkin, V., Mall, S., Hansen, M.A., Vandawaker, R.M. and Derriso, M. (2007). Investigation into cracked aluminum plate repaired with bonded composite patch. Composite Structures, 79, 55-66, https://doi.org/10.1016/j.compstruct.2005.11.028.
  • ABAQUS/Explicit (Version 6.14), User’s manual, Finite Element Software. Available from: http://www.simulia. com.
  • Manes, A., Serpellini, F., Pagani, M., Saponara, M. and Giglio, M. (2014). Perforation and penetration of aluminium target plates by armour piercing bullets. International Journal of Impact Engineering, 69, 39-54, https://doi.org/10.1016/j.ijimpeng.2014.02.010.
  • Singh, H., Namala, K. K. and Mahajan, P. (2015). A damage evolution study of E-glass/epoxy composite under low velocity impact. Composites Part B,76, 235-248, https://doi.org/10.1016/j.compositesb.2015.02.016.
There are 11 citations in total.

Details

Journal Section Articles
Authors

Umut Çalışkan

Recep Ekici

Mustafa Kemal Apalak

Publication Date December 26, 2017
Submission Date October 8, 2017
Published in Issue Year 2017 Volume: 9 Issue: 3

Cite

APA Çalışkan, U., Ekici, R., & Apalak, M. K. (2017). Effect of Composite Patch Geometry in Notched Plates Under Low Velocity Impact. International Journal of Engineering Research and Development, 9(3), 113-124. https://doi.org/10.29137/umagd.349964

All Rights Reserved. Kırıkkale University, Faculty of Engineering.