İğne Prosesli Döşemelik Kumaşların Fiziksel Özelliklerinin Geliştirilmesi

Abstract

Döşemelik kumaş üretimi, tekstil üretiminin önemli bir bölümünü oluşturmaktadır; burada sentetik liflerin kullanımı, kumaşın dayanıklılığını artırmak için esastır. Ancak, müşterilerin doğal bir görünüm beklentisi de göz önünde bulundurulmalıdır. Bu çalışma, doğal bir görünüm ile maliyet avantajları, rekabetçi fiyatlandırma ve kumaş dayanıklılığını dengeleyen en uygun ürünü belirlemeyi amaçlamakta ve döşemelik kumaşların tasarım ve üretim süreçlerine özgün bir katkı sağlamaktadır. Bu bağlamda, 333 dtex polyester iplikler kullanılarak hava tekstüre iplikler üretilmiştir. Bu hava tekstüre iplikler ile farklı atkı sıklığında dokuma tekniğine göre çeşitli kumaş üretimleri gerçekleştirilmiş, ardından kumaşın mukavemetini ve doğal görünümünü artırmak amacıyla iğneleme ve kaplama işlemleri yapılmıştır. Ardından, ISO 14465 standardına uygun fiziksel testler gerçekleştirilmiş ve sonuçlar, en uygun örneği belirlemek amacıyla tek yönlü varyans analizi (ANOVA) kullanılarak analiz edilmiştir. Bu çalışmanın bulguları, tüketici taleplerini karşılayan döşemelik kumaşların geliştirilmesine yönelik etkili stratejilere dair öngörüler sunarak mevcut bilgi birikimine katkıda bulunacaktır.

Keywords

• Döşemelik Kumaş
• Hava Tekstüre İplik
• Dikiş Açma
• Kopma Mukavemeti
• Yırtılma Mukavemeti

IMPROVING PHYSICAL PROPERTIES OF NEEDLE PUNCHED UPHOLSTERY FABRICS

Abstract

The production of upholstery fabrics represents a significant segment within textile manufacturing, where the use of synthetic fibers is essential for achieving higher durability in the fabric itself. However, customer expectations for a natural appearance must also be considered. This study aims to identify the optimal product that balances a natural look with cost advantages, competitive pricing, and fabric durability, contributing uniquely to the design and production processes of upholstery fabrics. In this context, 333 dtex polyester yarns were used to produce air textured yarns. Various fabric productions were carried out with these air textured yarns according to different weaving densities, followed by needle punching and coating processes to enhance both the stability and natural appearance of the fabric. Following this, physical tests were conducted in accordance with ISO 14465 standard, and the results were analysed using one-way analysis of variance (ANOVA) to determine the most suitable sample. The findings of this study will contribute to the existing body of knowledge by providing insights into effective strategies for developing upholstery fabrics that meet contemporary consumer demands.

Keywords

• Upholstery Fabric
• Air Textured Yarn
• Seam Slippage
• Tensile Strength
• Tear Strength

References

1. Abonassif, Gadah. (2012). Effect of Weave Structure and Weft Density on the Physical and Mechanical Properties of Micro polyester Woven Fabrics. J Am Sci 2012;8(8):947-952. (ISSN: 1545-1003).
2. Abromavičius R., Milašius R.; Dependences of Air Textured Polypropylene Yarn Properties on the Yarn Structure and Air Pressure in a Texturing Jet, FIBRES & TEXTILES in Eastern Europe 2009, Vol. 17, No. 3 (74) pp. 48-50.
3. Asaduzzaman, M. ., Mukibul Hasan, A. ., Mohsin Patwary, M. ., Mahmud, S., Ariful Islam, M. ., Hossain Raju, T., & Hossen, A. (2020). Effect of Weave Type Variation on Tensile and Tearing Strength of Woven Fabric. Technium: Romanian Journal of Applied Sciences and Technology, 2(6), 35–40. https://doi.org/10.47577/technium.v2i6.1409
4. Bilisik, K., Demiryurek, O. Analysis and tensile characterization of air-entangled textured polyester woven fabrics depending on interlacement and yarn sets. Fibers Polym 12, 390–398 (2011). https://doi.org/10.1007/s12221-011-0390-z
5. Bilisik, K., Demiryurek, O. Effect of weaving process on tensile characterization of single and multiple ends of air-entangled textured polyester yarns. Fibers Polym 12, 376–383 (2011). https://doi.org/10.1007/s12221-011-0376-x
6. Brahani at al. (2012) Bharani, Murugesan and M. I. Basava Lingana Gowda. “Characterization of Seam Strength and Seam Slippage on Cotton fabric with woven Structures and Finish.” (2012). Research Journal of Engineering Sciences, Vol. 1(2), 41-50, August (2012)
7. BS EN 14465, Textiles – Upholstery fabrics – Specification and methods of test
8. Ceven, Erhan & Gurarda, Ayca. (2017). An investigation of performance properties of curtain fabrics produced with different types of polyester yarns. Tekstil ve Konfeksiyon. 27. 131-138.

9. EN ISO 13934-1, Textiles- Tensile properties of fabrics- Part 1: Determination of maximum force and elongation at maximum force using the strip method
10. 1EN ISO 13936-2, Textiles - Determination of slippage resistance of yarns at a seam in woven fabrics - Part 2: Fixed load method
11. 1EN ISO 13937-3, Textiles- Tear properties of fabrics- Part 3: Determination of tear force of wing- shaped test specimens (Single tear method)
12. EN 2060, Textiles-Yarn from packages- Determination of linear density (mass per unit length) by the skein method
13. EN ISO 2062, Textiles - Yarns from packages - Determination of single-end breaking force and elongation at break using constant rate of extension (CRE) tester
14. Esi B, Baykal PD. Investigation of tensile strength and elongation properties of chenille upholstery fabrics including recycling polyester yarns. Journal of Engineered Fibers and Fabrics. 2020;15. doi:10.1177/1558925020916040
15. Gunaydin, Gizem. (2019). Effect of coating ratio and weft density on some physical properties of upholstery fabrics. Industria Textila. 70. 379-385. 10.35530/IT.070.04.1695.
16. Gurarda, Ayca. (2008). Investigation of the Seam Performance of PET/Nylon-elastane Woven Fabrics. Textile Research Journal - TEXT RES J. 78. 21-27. 10.1177/0040517507082636.
17. Huang S, Sun L, He M, Tang J, Huang L. Preparation and properties of polyimide air-jet textured yarns and their woven fabrics. Textile Research Journal. 2020;90(13-14):1507-1516. doi:10.1177/0040517519894391
18. Jamshaid H, Zahid B, Rajput AW Hussain S, Hussain U. Performance Evaluation of Upholstery Fabric Developed from Recycled Fibres, FIBRES & TEXTILES in Eastern Europe 2021; 29, 5(149): 46-49. DOI: 10.5604/01.3001.0014.9296
19. J. Thanikai Vimal, C. Prakash & A. Jebastin Rajwin (2018): Effect of Weave Parameters on the Tear Strength of Woven Fabrics, Journal of Natural Fibers, DOI:10.1080/15440478.2018.1558155
20. Khan at al. (2022) Khan A, Akram MW, Mahmud SH, Bin Habib MA and Mondal BV. Investigating the Influence of Yarn Density and Seam Construction on the Seam Performance of Woven Linen Fabric. Adv Res Text Eng. 2022; 7(1): 1067
21. Koral Koç, S., & Şengönül Hockenberger, A. (2010). Investigation Of Air-Jet Texturing Of Technical Polyester Yarns. Textile and Apparel, 20(4), 299-305.
22. Kos at al. (2013), Influence of Warp Density on Physical-mechanical Properties of Coated Fabric, Procedia Engineering, Volume 69, 2014, Pages 881-889, ISSN 1877-7058, https://doi.org/10.1016/j.proeng.2014.03.066
23. Lange at al. 2022 Lange, J.; Ciura, A.; Majewski, A.;Wojnowska, M. Study on the Influence of Selected Fabrics and Stitching on the Strength of Upholstery Covers. Materials 2022, 15, 3854. https://doi.org/10.3390/ma15113854
24. Lemmi at al. 2021 Lemmi, T.S.; Barburski, M.; Kabzi´nski, A.; Frukacz, K. Effect of Thermal Aging on the Mechanical Properties of High Tenacity Polyester Yarn. Materials 2021, 14, 1666. https://doi.org/10.3390/ma14071666
25. Malčiauskienė & Milašius, Rimvydas , Edita & Milašius, Algirdas. (2012). Influence of Fabric Structure Parameters on Seam Slippage. Fibres and Textiles in Eastern Europe. 20. 98-101.
26. Rengasamy, R.S., Guruprasad, R. & Asis, P. Dynamic friction of polyester air-jet textured yarns. Fibers Polym 6, 146–150 (2005). https://doi.org/10.1007/BF02875606
27. Serpil Koral Koc , Asli Sengonul Hockenberger & Memis Acar (2011) Effect of Air-Jet Texturing on Adhesion Behaviour of Technical Polyester Yarns to Rubber, Journal of Adhesion Science and Technology, 25:20, 2811-2827
28. Yasemin Bulut Vildan Sular, (2011),"Effects of process parameters on mechanical properties of coated fabrics", International Journal of Clothing Science and Technology, Vol. 23 Iss 4 pp. 205 – 221, http://dx.doi.org/10.1108/09556221111136476,
29. Zauraite, Justina & Vitkauskas, Arvydas & Jonaitiene, Vaida. (2007). The Dependence of Air textured PES Thread Mechanical Properties on Texturing Parameters. 333-336.
30. Zhang, J., Zhang, Z., Wang, S. et al. Investigation on air texturing process for diacetate blending with polyester filaments. Fibers Polym 8, 427–431 (2007). https://doi.org/10.1007/BF02875833