In
this study, two assembly lines with high product diversity are considered in an
automation technology manufacturer. It has been observed that the standard
times of the products produced in the assembly lines are incomplete, and there
is imbalance in the workloads of the operators. This study aims to eliminate
the bottlenecks in the production, to provide continuous flow, and to increase
workforce productivity. In the first phase, the predefined time systems MTM-1
and MTM-UAS are compared to determine the standard times. MTM-UAS is chosen due
to its fast and close to accurate results. Creating a database that contains
the product specifications and production operations, the standard times for
all products are determined by MTM-UAS. In the second stage, an integer
programming model has been developed for the mixed
model assembly line balancing problem, and the model is verified in a pilot
application. However, for all products, a solution cannot be obtained quickly
and efficiently with the
mathematical
model. For this reason, an algorithm based on simulated annealing is proposed.
The parameters of the proposed algorithm are determined by experimental design.
In the last stage, in order to facilitate the use of the proposed approach in
the company, a software with two modules is developed. With the proposed
approach, the time needed to calculate the standard time and prepare the work
order per product has been reduced from five days to 27 seconds. In addition,
an average improvement of 6% in the workforce productivity of each product and
an annual production capacity increase of 6.7% are achieved.
Bu
çalışmada, bir otomasyon teknolojileri üreticisinde ürün çeşitliliği yüksek
olan iki montaj hattı ele alınmıştır. Montaj hatlarında üretilen ürünlerin
standart zamanlarının eksik olduğu ve operatörlerin iş yüklerinde dengesizlikler
oluştuğu gözlenmiştir. Bu çalışma, üretimdeki darboğazların ortadan
kaldırılmasını, sürekli akışın sağlanmasını ve iş gücü verimliliğini arttırmayı
hedeflemektedir. İlk aşamada, standart zamanları belirlemek için ön tanımlı
zaman sistemleri olan MTM-1 ve MTM-UAS karşılaştırılmıştır. Hızlı ve doğruya
yakın sonuçları nedeniyle MTM-UAS seçilmiştir. Ürünlerin özelliklerini ve
üretim operasyonlarını içeren bir veri tabanı oluşturularak tüm ürünler için
MTM-UAS ile standart zamanlar belirlenmiştir. İkinci aşamada, karışık modelli
montaj hattı dengeleme problemi için tamsayılı programlama modeli
geliştirilmiştir ve pilot bir uygulamada model doğrulanmıştır. Ancak, tüm
ürünler için matematiksel model ile hızlı ve etkin bir şekilde çözüm elde
edilememiştir. Bu nedenle, tavlama benzetimi tabanlı bir algoritma
önerilmiştir. Önerilen algoritmanın parametreleri deneysel tasarım ile
belirlenmiştir. Son aşamada, önerilen yaklaşımın firmada kullanımını
kolaylaştırmak amacıyla iki modüllü bir yazılım geliştirilmiştir. Önerilen
yaklaşım ile bir ürün için standart zaman hesaplama ve iş talimatı hazırlama
süresi beş günden 27 saniyeye düşürülmüştür. Bunun yanı sıra, iş gücü
verimliliğinde ürün başına ortalama %6 oranında iyileşme ve yıllık üretim
kapasitesinde %6,7 oranında artış sağlanmıştır.
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | April 24, 2018 |
Submission Date | September 18, 2017 |
Acceptance Date | March 19, 2018 |
Published in Issue | Year 2018 Volume: 23 Issue: 1 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.