Üretim
atıksuyu petrol ve doğalgaz üretimi sırasında oluşarak petrol ve doğalgazın
yeraltından pompalanması ile birlikte yüzeye çıkmaktadır. Üretim atıksuyu, içerisinde
birçok organik ve inorganik bileşik içeren ve bu nedenle deşarjı öncesinde
uygun şekilde arıtılması gereken bir atıksu türüdür. Üretim atıksularının
arıtılmasında fiziksel, kimyasal ve/veya biyolojik yöntemler kullanılmaktadır.
Bu çalışmada, petrol ve doğalgaz üretim atıksularının biyolojik olarak
arıtılabilirliğinin ortaya konması amaçlanmıştır. Bu kapsamda; petrol ve
doğalgaz üretimi ve sadece doğalgaz üretimi yapan sahalardan elde edilen üretim
atıksuyu ardışık kesikli reaktör (AKR) sisteminde arıtılmıştır. Doğalgaz üretim
sahasından alınan atıksuyun yüksek tuzluluk içeriğinden dolayı, biyolojik
arıtılabilirliğinin düşük seviyede olduğu görülmüştür. Petrol ve doğalgaz üretim
sahasından alınan üretim atıksuyunda ise ortalama KOİ giderim verimi %68
seviyesine ulaşmıştır. Petrol ve doğalgaz üretim atıksuyunun biyolojik olarak
arıtılamayacak (inert) fraksiyonları da çalışma kapsamında belirlenmiştir.
Üretim atıksuyunda %86 oranında biyolojik olarak giderilebilen KOİ içeriği
olduğu saptanmış ve geri kalan kısmın inert partiküler ve inert çözünmüş KOİ
olduğu tespit edilmiştir. Üretim atıksuyunda inert karakterizayonun ve
biyolojik arıtılabilirliğinin belirlenmesi, en uygun arıtma prosesi seçiminde
yol gösterici olması bakımından oldukça önemlidir.
Ardışık kesikli reaktör biyolojik arıtılabilirlik inert KOİ toplam petrol hidrokarbonları petrol ve doğal gaz üretim atıksuyu
Produced water is co-produced during oil and gas
production and the oil/water mixture is pumped out of the well to the surface. Produced
water contains various organic and inorganic components and thus, should be
treated properly before its discharge. Physical, chemical and biological
methods are used for the treatment of produced water. The aim of this study was
to determine the biological treatability of produced water originated from oil
and natural gas fields. Within this concept, produced water from oil and
natural gas field, and from natural gas field was treated by sequencing batch
reactors (SBR). Because of the high salinity content of the produced water from
natural gas field, biological treatability of the samples from this field was very
low. Average COD removal efficiency of 68% was achieved in the SBR treating
produced water from oil and natural gas field. Non-biodegradable (inert)
fractions of the produced water were also determined in the study.
Biodegradable COD constituted 86% of total COD in the produced water. The rest
part of the total COD was found as inert (particulate and soluble) COD. Determination
of the inert characterization and biological treatability of the produced water
is very critical for the selection of the most appropriate treatment method.
Biological treatability inert COD produced water sequencing batch reactor total petroleum hydrocarbons
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | August 31, 2018 |
Submission Date | November 24, 2017 |
Acceptance Date | May 4, 2018 |
Published in Issue | Year 2018 Volume: 23 Issue: 2 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.