Bu çalışmada, ultraviyole (UV) ışınlarının teknik
alanlarda kullanılan poliester ipliklerin yüzey özellikleri, mekanik
özellikleri ve içyapısı üzerine etkisi araştırılmıştır. Bu amaçla teknik
alanlarda kullanılan yüksek dayanımlı polietilen tereftalat (HT PET), boyutsal
kararlı polietilen tereftalat (DS PET), polietilen naftalat (PEN) ve sıvı
kristal polimer yapısında olan Vectran
iplikler kullanılmıştır. Karşılaştırma yapılabilmesi amacıyla konvansiyonel
olarak kullanılan tam çekimli polietilen tereftalat (FDY PET) iplikler de
çalışmaya dâhil edilmiştir. İpliklerin UV ile yaşlandırma sonrası yüzey
özellikleri taramalı elektron mikroskobu (SEM), mekanik özellikleri çekme testleri,
içyapılarındaki değişiklikler ise Fourier Dönüşümlü Infrared Spektrofotometre
(FTIR) analizleri ile incelenmiştir. Yapılan çalışmalar sonucunda, UV ile yaşlandırma
sonrasında en belirgin değişikliklerin Vectran’da,
en az değişimin ise PEN’de olduğu gözlenmiştir. Vectran liflerinin sarardığı, yüzeylerinde bazı hasarların meydana geldiği
ve mekanik özelliklerinin olumsuz etkilendiği görülmüştür. FTIR analizleri de
bu bulguları desteklemektedir.
In this study, the effect of ultraviolet (UV) light on the surface
properties, mechanical properties and microstructural properties of technical
polyester yarns were investigated. Therefore, high tenacity polyethylene
terepthtalate (HT PET), dimensionally stable polyethylene terepthtalate (DS
PET), polyethylene naphthalate (PEN) and liquid crystal polymer Vectran yarns were used. Fully drawn
polyethylene terepthtalate (FDY PET) yarns were also included in the study in
order to compare the results. The changes
in the properties of the samples after UV aging were investigated by scanning
electron microscopy (SEM) studies, tensile tests and Fourier transform infrared
spectroscopy (FTIR) analyses. The most significant difference was observed
in Vectran in terms of colour and surface properties. Moreover, the mechanical properties of Vectran were negatively affected. PEN
showed the least difference among the other samples. FTIR results supported the
findings.
Primary Language | Turkish |
---|---|
Subjects | Engineering |
Journal Section | Research Articles |
Authors | |
Publication Date | April 30, 2019 |
Submission Date | January 17, 2019 |
Acceptance Date | March 13, 2019 |
Published in Issue | Year 2019 Volume: 24 Issue: 1 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.