Bu çalışmada ilk olarak, betonarme sürekli kirişlerin detaylı tasarımlarının minimum maliyetle yapılabileceği bir süreç tasarlanmıştır. Ardından bu problem üzerinde FDB-TLABC, TLABC, TLBO ve ABC algoritmalarının performansları değerlendirilmiştir. Bu amaçlarla öncelikle Türk betonarme standardı ve deprem yönetmeliği dikkate alınarak optimizasyon problemi oluşturulmuştur. Bir, iki ve üç açıklıklı kiriş örneklerinden oluşan bir problem takımı hazırlanmıştır. Bu problem takımı üzerinde yapılan testlerden algoritmaların optimum sonuca ulaşma performansları ile belirlenen makul çözümlere ulaşma süreleri ve başarıları belirlenmiştir. Optimum sonuca ulaşmada, TLABC ve FDB-TLABC algoritmalarının en başarılı algoritmalar olduğu görülmüştür. Kararlılık analizinden, TLABC algoritmasının en yüksek kararlılığa ve hıza sahip olduğu görülmüştür.
In this study, firstly, a process by which detailed designs of RC continuous beams can be made with minimum cost was designed. Then, the performances of the FDB-TLABC, TLABC, TLBO, and ABC algorithms on this problem were evaluated. For these purposes, first, the optimization problem was created by taking into account the Turkish reinforced concrete standard and earthquake regulations. A problem set consisting of one, two, and three-span beam samples was prepared. From the tests carried out on this problem set, the performance of the algorithms to reach the optimal result and the time to reach feasible solutions and their success were determined. It was seen that the TLABC and FDB-TLABC algorithms are the most successful in reaching the optimum result. From the stability analysis, it was seen that the TLABC algorithm has the highest stability and speed.
Primary Language | Turkish |
---|---|
Subjects | Civil Engineering (Other) |
Journal Section | Research Articles |
Authors | |
Early Pub Date | March 28, 2024 |
Publication Date | April 22, 2024 |
Submission Date | June 9, 2023 |
Acceptance Date | March 4, 2024 |
Published in Issue | Year 2024 Volume: 29 Issue: 1 |
Announcements:
30.03.2021-Beginning with our April 2021 (26/1) issue, in accordance with the new criteria of TR-Dizin, the Declaration of Conflict of Interest and the Declaration of Author Contribution forms fulfilled and signed by all authors are required as well as the Copyright form during the initial submission of the manuscript. Furthermore two new sections, i.e. ‘Conflict of Interest’ and ‘Author Contribution’, should be added to the manuscript. Links of those forms that should be submitted with the initial manuscript can be found in our 'Author Guidelines' and 'Submission Procedure' pages. The manuscript template is also updated. For articles reviewed and accepted for publication in our 2021 and ongoing issues and for articles currently under review process, those forms should also be fulfilled, signed and uploaded to the system by authors.