Malzeme Tedarikinde Yerlileştirme: Bir Literatür Araştırması

Yıl 2017, , 7 - 22, 01.01.2017

Hakki Nalcioglu Huseyin Selcuk Kilic

https://doi.org/10.5824/1309-1581.2017.1.001.x

Öz

Tedarik zincirinin esnekliğini artıran ve maliyet azaltma tekniklerinden biri olarak görülen Malzeme Tedarikinde Yerlileştirme, günümüz küreselleşen dünyasında en son eğilimlerden biri haline gelmiştir. Son on yıla baktığımız zaman, hem akademisyenler hem de pratik uygulamacılar nazarında Yerlileştirmenin farkındalığı artmıştır. Bu makalenin amacı Yerlileştirmeyi etkileyen faktörleri önermek ve bu alanda uygulanan metotları ve güncel çalışmaları incelemektir. Çalışma Tedarik Zincirinde Yerlileştirme üzerine, özellikle de, Malzeme Tedarikinde Yerlileştirme üzerine yoğunlaşmıştır. Bununla birlikte, Satış Alanındaki Yerlileştirme konusundaki araştırmalar da incelenmiş ve tartışılmıştır. Bu çalışmanın literatüre katkısı, Malzeme Tedarikinde Yerlileştirme konusunda yapılan çalışmaların sektör, tip ve kullanılan metotların analizi noktasında olmaktadır. Ayrıca, Malzeme Tedarikinde Yerlileştirme noktasında yeni araştırma alanları da önerilmektedir.

Anahtar Kelimeler

Malzeme Tedarikinde Yerlileştirme, Tedarik Zinciri Yönetimi, Tedarik Zinciri Stratejisi

Localization of Material Supply: A Literature Review

Öz

Localization of Material Supply which is considered as a cost reduction method and a strategy that increases the flexibility of the supply chain in the companies has become one of the most recent trends in our globalized world. The awareness of the Localization increased over the last decade within both academics and practitioners. The purpose of the article is to suggest the factors that affect Localization and review the recent studies of Localization and analyse the methods that have been used in this field. The paper focusses on Localization in Supply Chains, more specifically, Localization of Material Supply. However, the publications about Sales Localization according to Regional Culture are also reviewed and discussed. This review considering Localization of Material Supply contributes to the literature by analysing the sectors, types and methods. Moreover, new research directions for Localization of Material Supply are proposed.

Anahtar Kelimeler

Localization of Material Supply, Supply Chain Management, Supply Chain Strategy

Kaynakça

• Andersson, M., & Segerdahl, R. (2012). Supply Chain Localization Strategies for the Future-A study of Swedish AIE companies. Master of Science Thesis in the Master Degree Program Supply Chain Management
• Andresen, M. A. (2009). Regionalizing global trade patterns, 1981–2001: application of a new method. The Canadian Geographer/Le Géographe canadien, 53(1), 24-44.
• Bayo-Moriones, A., Bello-Pintado, A., & Merino-Díaz-de-Cerio, J. (2011). Quality assurance practices in the global supply chain: the effect of supplier localisation. International Journal of Production Research, 49(1), 255-268.
• Choi, C. H. (2003). The China Strategies of Korea’s Winning Companies. NRI Papers, 67, 1-8.
• Christopher, M. (2000). The agile supply chain: competing in volatile markets. Industrial marketing management, 29(1), 37-44.
• Cooper, R., & Slagmulder, R. (1999). Supply chain management for lean enterprises: Interorganizational cost management. Strategic finance, 80(10), 15.
• Ernst, R., & Kamrad, B. (2000). Evaluation of supply chain structures through modularization and postponement. European journal of operational research, 124(3), 495-510.
• Garbelli, M. E. (2002). Over-Supply and Manufacturing Localization. Symphonya-Emerging Issues in Management, (1), 112-126.
• Gereffi, G., Humphrey, J., & Kaplinsky, R. (2001). Introduction: Globalisation, value chains and development. IDS bulletin, 32(3), 1-8.
• Giddens, A. (2002). Runaway world: How globalisation is reshaping our lives. Profile books.
• Gould, S. J. (1989). Service opinion leadership: a management tool for service providers and product marketers alike. Journal of Professional Services Marketing, 4(1), 3-14.
• Hervani, A. A., Helms, M. M., & Sarkis, J. (2005). Performance measurement for green supply chain management. Benchmarking: An international journal, 12(4), 330-353.
• Hines, P. (1994). Creating world class suppliers: Unlocking mutual competitive advantage. Pitman Pub..
• Jiang, B., & Prater, E. (2002). Distribution and logistics development in China: The revolution has begun. International Journal of Physical Distribution & Logistics Management, 32(9), 783-798.
• Kannan, V. R., & Choon Tan, K. (2006). Buyer-supplier relationships: The impact of supplier selection and buyer-supplier engagement on relationship and firm performance. International Journal of Physical Distribution & Logistics Management, 36(10), 755-775.
• Kennedy, W. J., Patterson, J. W., & Fredendall, L. D. (2002). An overview of recent literature on spare parts inventories. International Journal of production economics, 76(2), 201- 215.
• Ketchen, D. J., Rebarick, W., Hult, G. T. M., & Meyer, D. (2008). Best value supply chains: A key competitive weapon for the 21st century. Business Horizons, 51(3), 235-243.
• Kulmala, H., Paranko, J., Sievänen, M., Suomala, P., & Tornberg, K. (2001, June). Cost perspectives of product development. In Proceedings of ISPIM, The 13th International Conference, Lappeenranta University of Technology.
• Lambert, D. M., Emmelhainz, M. A., & Gardner, J. T. (1996). Developing and implementing supply chain partnerships. The international Journal of Logistics management, 7(2), 1- 18.
• Lee, C., Chen, J., & Fujimoto, T. (1996). Different Strategies of Localization in the Chinese Auto Industry: The Case of Shanghai Volkswagen and Tianjin Daihatsu. International Motor Vehicle Program, Massachusetts Institute of Technology.
• Lee, H. L., Billington, C., & Carter, B. (1993). Hewlett-Packard gains control of inventory and service through design for localization. Interfaces, 23(4), 1-11.
• Lumsden, K. (2007). Fundamentals of logistics. Compendium containing the chapters, 1-2.
• Makar, S. D., & Huffman, S. P. (2011). Foreign currency risk management practices in US multinationals. Journal of Applied Business Research (JABR), 13(2), 73-86.
• Mattsson, L. G. (2003). Reorganization of distribution in globalization of markets: the dynamic context of supply chain management. Supply Chain Management: An International Journal, 8(5), 416-426.
• Mazzarino, M. (2012). Strategic scenarios of global logistics: what lies ahead for Europe?. European Transport Research Review. 4(1), 1-18
• Meijboom, B., & Voordijk, H. (2003). International operations and location decisions: a firm level approach. Tijdschrift voor economische en sociale geografie, 94(4), 463-476.
• Mentzer, J. T., DeWitt, W., Keebler, J. S., Min, S., Nix, N. W., Smith, C. D., & Zacharia, Z. G. (2001). Defining supply chain management. Journal of Business logistics, 22(2), 1-25.
• Monczka, R., Handfield, R., Giunipero, L., & Patterson, J. (2015). Purchasing and supply chain management. Cengage Learning.
• Morgenstern, D. (2006). Supply Base Localization: A Different Look at Low-cost Country Sourcing. Supply & Demand Chain Executive, 7, 28.
• Munday, M., & Roberts, A. (2001). Assessing the regional transactions of foreign manufacturers in Wales: issues and determinants. Tijdschrift voor economische en sociale geografie, 92(2), 202-216.
• Murat, Y.S., Bayraktar, C. A.,(2006), Supplier Performance Evaluation and Decreasing Number of Suppliers in Supply Chain management, Master Thesis, (Doctoral dissertation, Fen Bilimleri Enstitüsü)
• Nicholson, C. F., Gómez, M. I., & Gao, O. H. (2011). The costs of increased localization for a multiple-product food supply chain: Dairy in the United States. Food Policy, 36(2), 300- 310.
• Prasad, S., & Sounderpandian, J. (2003). Factors influencing global supply chain efficiency: implications for information systems. Supply Chain Management: An International Journal, 8(3), 241-250.
• Smeltzer, L. R., & Ogden, J. A. (2002). Purchasing professionals' perceived differences between purchasing materials and purchasing services. Journal of Supply Chain Management, 38(4), 54-70.
• Spekman, R. E., Kamauff, J., & Spear, J. (1999). Towards more effective sourcing and supplier management. European Journal of Purchasing & Supply Management, 5(2), 103-116.
• Sum, C. C., & Yang, K. K. (1993). A study on manufacturing resource planning (MRP II) practices in Singapore. Omega, 21(2), 187-197.
• TAŞ, A., (2012), External Shocks Encountered In Countries Of Origin And Effects Of These Shocks On The Activities Of Subsidiary Companies: A Case Study, Dumlupınar University Sosyal Bilimler Dergisi, Voulme 33, p. 237-250
• Trent, R. J., & Monczka, R. M. (2002). Pursuing competitive advantage through integrated global sourcing. The Academy of Management Executive, 16(2), 66-80.
• Twomey, J., & Tomkins, J. M. (1996). Supply chains, material linkage and regional development. Urban studies, 33(6), 937-954.
• Ugochukwu, P., Engström, J., & Langstrand, J. (2012). Lean in the supply chain: a literature review. Management and Production Engineering Review, 3(4), 87-96.
• Uusi-Rauva, E., & Paranko, J. (1998). Kustannuslaskenta ja tuotekehityksen tarpeet. Tampereen teknillinen korkeakoulu.
• Van Weele, A. J. (2009). Purchasing and supply chain management: Analysis, strategy, planning and practice. Cengage Learning EMEA.
• Vargas, G. A., & Johnson, T. W. (1993). An analysis of operational experience in the US/Mexico production sharing (maquiladora) program. Journal of Operations Management, 11(1), 17-34.
• West, D. C. (1997). Purchasing professional services: the case of advertising agencies. International Journal of Purchasing and Materials Management, 33(2), 2-9.
• Yang, Y. R., & Hsia, C. J. (2007). Spatial clustering and organizational dynamics of transborder production networks: A case study of Taiwanese information-technology companies in the Greater Suzhou Area, China. Environment and Planning A, 39(6), 1346-1363.
• Zhang, S. J., Kan, Y. Q., & Huang, D. P. (2014, September). Standard Requirements and Localization Development Trend for Nuclear Power Plant Key Components Material. In Applied Mechanics and Materials (Vol. 628, pp. 406-409). Trans Tech Publications.