SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS

Gökay Nemli; Samet Demirel

SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS

Yıl 2005, Cilt: 6 Sayı: 1, 59 - 68, 20.03.2011

https://izlik.org/JA25RA69TP

Öz

In this study, properties of the coated boards, packaging, transportation, storage, cleaning on the boards and some points to be considered for the machining of the boards were investigated.

Anahtar Kelimeler

-

Kaynakça

Toker, R., Veyisoğlu, A., Gümüşdüğme, Y., Lamine Kaplamalı Laminatlı Mobilyalar, Mobilya Dekorasyon Dergisi, 4 (1995) 12.
Suchsland, O., Yonggang, F., Damping, X.V., The Hygroscobic Warping of Laminated Panels, Forest Products Journal, 43 (1) (1993) 15-20.
Kamurowski, J., Lfebure, D.,Roy, C., Randon, C., Stacking Sequence Effects and Delamination Growth in Laminates Under Compression Laminated Fatique Loacking, Composite Materials, 1230 (1995) 249-265.
Yuan, J., Falanga, L.A., Prediction of Thickness Thermal Expansion Coefficients of palin Weave Fabric Composites, Structural Analysis in Microelectronics and Fiber Optics, 7 (1993) 43-46.
ISO 4586-1, Decorative High Pressure Laminates, Switzerland, 1987.
Popov, P.M., Peskov, N.E., Lushnikova, R.N., The Method of Quality Control of Composite Materials of Prepreg Type, Defoktoskopiya, 1 (1) (1994) 50-51.
Anonim, Wood Handbook, Insulation Board, Hardboard, MDF and Laminated Paperboards, Forest Products Laboratory, Washington, USA, 1972.
Richter, J.A., Printing and Finishing Particleboard, Furniture Finishing textbook, Production Publishing Company, Fur. Prod.: 804, Tennesse, USA, 1977.
Anonim, From Start to Finish Particleboard, National Particleboard Association, Gaithersburg, 1988.
Anonim, Decorative Overlays, Wood and Products, 6 (5) (1990) 78-84.
Anonim, A Glossary of Terms, National Particleboard Association, Gaithersburg, 1989.
Enzensberger, W., Important Factors of Influence in Planning Installations for Decorative Lamination of Wood Based Panels, Holz als Roh und Werkstoff, 38 (10) (1980) 375-380.
Hornitex, High Tech in Wood and Laminates, Tips and Suggestions for Processing, Best Nr.: 103, 3.91.5.B, Meinberg, Germany

KAPLANMIŞ LEVHA ÜRÜNLERİNİN KULLANIMINDA VE İŞLENMESİNDE DİKKAT EDİLMESİ GEREKEN BAZI HUSUSLAR

Yıl 2005, Cilt: 6 Sayı: 1, 59 - 68, 20.03.2011

Gökay Nemli Samet Demirel

https://izlik.org/JA25RA69TP

Öz

Bu çalışmada; kaplanmış levhaların özellikleri, levhalarda bakım, taşıma, depolama ve temizlik ile levhaların işlenmesinde dikkat edilmesi gereken bazı hususlar incelenmiştir.

Anahtar Kelimeler

Kaplanmış levha , bakım , taşıma , depolama , temizlik , işlenme

Kaynakça

Toker, R., Veyisoğlu, A., Gümüşdüğme, Y., Lamine Kaplamalı Laminatlı Mobilyalar, Mobilya Dekorasyon Dergisi, 4 (1995) 12.
Suchsland, O., Yonggang, F., Damping, X.V., The Hygroscobic Warping of Laminated Panels, Forest Products Journal, 43 (1) (1993) 15-20.
Kamurowski, J., Lfebure, D.,Roy, C., Randon, C., Stacking Sequence Effects and Delamination Growth in Laminates Under Compression Laminated Fatique Loacking, Composite Materials, 1230 (1995) 249-265.
Yuan, J., Falanga, L.A., Prediction of Thickness Thermal Expansion Coefficients of palin Weave Fabric Composites, Structural Analysis in Microelectronics and Fiber Optics, 7 (1993) 43-46.
ISO 4586-1, Decorative High Pressure Laminates, Switzerland, 1987.
Popov, P.M., Peskov, N.E., Lushnikova, R.N., The Method of Quality Control of Composite Materials of Prepreg Type, Defoktoskopiya, 1 (1) (1994) 50-51.
Anonim, Wood Handbook, Insulation Board, Hardboard, MDF and Laminated Paperboards, Forest Products Laboratory, Washington, USA, 1972.
Richter, J.A., Printing and Finishing Particleboard, Furniture Finishing textbook, Production Publishing Company, Fur. Prod.: 804, Tennesse, USA, 1977.
Anonim, From Start to Finish Particleboard, National Particleboard Association, Gaithersburg, 1988.
Anonim, Decorative Overlays, Wood and Products, 6 (5) (1990) 78-84.
Anonim, A Glossary of Terms, National Particleboard Association, Gaithersburg, 1989.
Enzensberger, W., Important Factors of Influence in Planning Installations for Decorative Lamination of Wood Based Panels, Holz als Roh und Werkstoff, 38 (10) (1980) 375-380.
Hornitex, High Tech in Wood and Laminates, Tips and Suggestions for Processing, Best Nr.: 103, 3.91.5.B, Meinberg, Germany

Toplam 13 adet kaynakça vardır.

Ayrıntılar

Birincil Dil	İngilizce
Yazarlar	Gökay Nemli Bu kişi benim Samet Demirel Bu kişi benim
Yayımlanma Tarihi	20 Mart 2011
IZ	https://izlik.org/JA25RA69TP
Yayımlandığı Sayı	Yıl 2005 Cilt: 6 Sayı: 1

Kaynak Göster

APA	Nemli, G., & Demirel, S. (2011). SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, 6(1), 59-68. https://izlik.org/JA25RA69TP
AMA	1.Nemli G, Demirel S. SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS. AÇÜOFD. 2011;6(1):59-68. https://izlik.org/JA25RA69TP
Chicago	Nemli, Gökay, ve Samet Demirel. 2011. “SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 6 (1): 59-68. https://izlik.org/JA25RA69TP.
EndNote	Nemli G, Demirel S (01 Mart 2011) SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 6 1 59–68.
IEEE	[1]G. Nemli ve S. Demirel, “SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS”, AÇÜOFD, c. 6, sy 1, ss. 59–68, Mar. 2011, [çevrimiçi]. Erişim adresi: https://izlik.org/JA25RA69TP
ISNAD	Nemli, Gökay - Demirel, Samet. “SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi 6/1 (01 Mart 2011): 59-68. https://izlik.org/JA25RA69TP.
JAMA	1.Nemli G, Demirel S. SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS. AÇÜOFD. 2011;6:59–68.
MLA	Nemli, Gökay, ve Samet Demirel. “SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS”. Artvin Çoruh Üniversitesi Orman Fakültesi Dergisi, c. 6, sy 1, Mart 2011, ss. 59-68, https://izlik.org/JA25RA69TP.
Vancouver	1.Gökay Nemli, Samet Demirel. SOME POINTS TO BE CONSIDERED IN THE USAGE AND MACHINING OF COATED BOARD PRODUCTS. AÇÜOFD [Internet]. 01 Mart 2011;6(1):59-68. Erişim adresi: https://izlik.org/JA25RA69TP