PROTEZ CİLA MATERYALLERİNİN FARKLI KAİDE MADDELERİNİN YÜZEY PÜRÜZLÜLÜĞÜNE ETKİSİ
Öz
Amaç: Protez
kaide materyallerinin yüzey pürüzlülüğü protezin klinik kullanımını etkileyen
önemli bir özel- liktir. Bu çalışmanın amacı farklı cila materyallerinin
polimetilmetakrilat (PMMA) ve poliamid içerikli protez kaide maddelerinin,
temizleme tableti uygulama son- rası yüzey pürüzlülüğüne etkisinin
değerlendirilmesidir.
Gereç ve Yöntem: Çalışmada polimetilmetakrilat (QC -20) ve poliamid (Deflex) esaslı iki
farklı kaide mad- desi kullanılarak toplamda 60 adet örnek 3 mm kalınlık ve 20
mm çapta diskler halinde (n=10) hazırlandı. Kontrol grubunda örnekler pomza ve
kıl fırça ile cila- landı. İkinci grup örneklere pomza ile yapılan cilayı ta- kiben
Universal Polishing Paste, üçüncü gruba ise Pa- laseal cila materyali
uygulandı. Yüzey pürüzlülük öl- çümleri örnekler efervesan tablet formundaki
Corega temizleyici solüsyon uygulamadan önce ve sonra dijital bir
profilometre cihazı kullanılarak yapıldı. Örneklerin pürüzlülük değişiklikleri (Ra) iki yönlü varyans
analizi ve Fisher’s
LSD test ile istatiksel
olarak karşılaştırıldı (p<0,05)
Bulgular: Cila
materyalleri ve protez kaideleri arasın- da istatiksel olarak anlamlı
etkileşimler bulundu (p< 0,001). Cila materyali uygulanan bütün örnekler,
sade- ce pomza ile cilalanan kontrol gruplarına göre daha düşük pürüzlülük
değerleri gösterdi (p<0,001). Protez temizleyicisi polimetilmetakrilat ve
poliamid rezinlerinin pürüzlülüğünü anlamlı olarak arttırdı (p<0,001)
Sonuç: Protez cila materyallerinin uygulanması ile
protez yüzeylerinin daha düzgün hale getirilebileceği ve protez
temizleyici tabletlerin neden olabileceği yüzey pürüzlülüğünü azaltabileceği
göz önünde bulundurulmalıdır.
Anahtar Kelimeler: polimetilmetakrila, poliamid, protez temizleyicileri, yüzey pürüzlülüğü
ABSTRACT
Aim: Surface roughness of denture base materials is an
important property that affects clinical use of the prostheses. The aim of this
study is to evaluate the effect of different polishing materials on
surface roughness of polymethlymethacrylate and polyamide denture base resins
after use of a denture cleaner.
Material and Method: Total of 60 samples were prepared from polymethlymethacrylate (QC-20) and polyamide (Deflex) as 3 mm thickness and 20 mm diameter disc
shaped (n=10). Samples were polished with pumice and bristle brush in control
groups. Universal Polishing Paste were subjected to the second group after
pumice and Palaseal were subjected to the third group. Surface roughness test was performed with a digital
prophylometer (Ra) before and after effervesance denture cleaner (Corega). Data
were analysed by two way ANOVA and Fischers LSD post hoc test (p<0,05).
Results: Polish materials and denture bases showed significant interactions (p<0,001). Groups polished with polish materials showed significantly lower surface roughness values when compared to control groups that polished only with pumice (p<0,001). Denture cleaner increased the surface roughness of polymethlymethacrylate and polyamide resins significantly (p<0,001).Conclusion: It should be considered that denture polish materials may provide more smooth denture surfaces and eliminate the deleterious effects of denture cleaners.
Key words: polymethlymethacrylate; polyamide; denture cleaner; surface roughness
Anahtar Kelimeler
Kaynakça
- . O Brian WJ. Dental Material and their selection. 4 ed. Chicago; Quintessence Publishing: 2008. p. 75–113.
- 2. Uçar Y, Bakar O, Ekinci M, Kayar B. Poliamid ile farklı polimetilmetakrilat protez kaide materyal- lerinin mikroorganizma tutulumunun karşılaştırıl- ması. S.D.Ü. Tıp Fak. Derg 2013;20:8-13.
- 3. Yunus N, Rashid AA, Azmi LL, Abu-Hassan MI. Some flexural properties of a nylon denture base polymer. J Oral Rehabil 2005;32:65-71.
- 4. Polychronakis NC, Polyzois GL, Lagouvardos PE, Papadopoulos TD. Effects of cleansing methods on 3-D surface roughness, gloss and color of a polyamide denture base material. Acta Odontol Scand 2015;73:353-63.
- 5. Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: a review of the literature. Dent Mater 1997;13:258–69.
- 6. Sipahi C, Anıl N, Bayramlı E. The effect of acquired salivary pellicle on the surface free energy and wettability of different denture base materials. J Dent 2001;29:197-204.
- 7.Morgan TD, Wilson M. The effects of surface roughness and type of denture acrylic on biofilm formation by Stretococcus oralis in constant depth film fermentor. J Appl Microbiol 2001;91:47-53.
- 8.Sofou A, Emmanouil J, Peutzfeldt A, Owall B. The effect of different polishing techniques on the surface roughness of acrylic resin materials. Eur J Prosthodont Restor Dent 2001;9:117-22.
Ayrıntılar
Birincil Dil
Türkçe
Konular
-
Bölüm
Araştırma Makalesi
Yayımlanma Tarihi
1 Aralık 2016
Gönderilme Tarihi
6 Şubat 2017
Kabul Tarihi
21 Nisan 2016
Yayımlandığı Sayı
Yıl 2016 Cilt: 26 Sayı: 3