CURRENT DESIGN AND MANUFACTURING TECHNIQUES USED IN FIXED PROSTHETIC RESTORATIONS

Öz

Especially for the fixed prosthetic restorations in the posterior region, the veneering ceramic should be supported by the framework to increase the strength of the restoration against masticatory forces. By the improved technology and novelties in the used materials, computer aided design/computer aided manufacturing systems are used in the frameworks as well as in the veneering ceramics in contemporary prosthetic restorations. While the framework techniques frequently used in the fixed prosthetic restorations are lost-wax casting, subtractive and layered addivite techniques; methods used for the suprastructures are layering, pressing and the filesplitting technique obtained by computer aided design/computer aided manufacturing system. In this review, current framework and veneering techniques used in fixed prosthetic restorations are analyzed

Anahtar Kelimeler

• techniques, CAD/CAM Framework techniques, veneering

SABİT PROTETİK RESTORASYONLARDA KULLANILAN GÜNCEL TASARIM VE ÜRETİM YÖNTEMLERİ

Öz

Özellikle posterior bölgede uygulanan sabit protetik restorasyonlarda, çiğneme kuvvetleri karşısın- da restorasyonun dayanıklılığını arttırmak amacıyla üst yapı seramiği alt yapı ile desteklenmelidir. Gelişen teknoloji ve kullanılan materyallerdeki yenilikler ile, bilgisayar destekli tasarım/bilgisayar destekli üretim sistemleri günümüz protetik restorasyonlarda alt yapıların yanı sıra üst yapıların hazırlanmasında da kullanılmaktadır. Sabit protetik restorasyonlarda sıklıkla kullanılan alt yapı hazırlama yöntemleri gele- neksel kayıp mum tekniği, eksiltme ve tabakalama esaslı ekleme yöntemleri iken; üst yapı hazırlama yön- temleri tabakalama, ısı-basınç ile şekillendirme ve bilgisayar destekli tasarım/bilgisayar destekli üretim sistemi ile elde edilen ‘’dosya bölme’’ teknikleridir. Bu derlemede, sabit protetik restorasyonlarda kullanılan güncel alt yapı ve üst yapı hazırlama yöntemleri incelenmektedir.

 

Anahtar Kelimeler

• Alt yapı hazırlama yöntemleri, üst yapı hazırlama yöntemleri, CAD/CAM

Kaynakça

1. Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557-62.
2. Ishibe M, Raigrodski AJ, Flinn BD, Chung KH, Spiekerman C, Winter RR. Shear bond strengths of pressed and layered veneering ceramics to high- noble alloy and zirconia cores. J Prosthet Dent 2011;105:29-37.
3. Zarone F, Russo S, Sorrentino R. From porcelain- fused-to-metal experimental 2011;27:83-96. clinical Dent Mater
4. Çömlekoğlu ME, Dündar M, Özcan M, Güngör MA, Gökçe B, Artunç C. Evaluation of bond strength of various margin ceramics to a zirconia ceramic. J Dent 2008;36:822-7.
5. Kelly JR, Denry I. Stabilized zirconia as a structural ceramic: an overview. Dent Mater 2008;24:289-98.
6. Schmitter M, Mueller D, Rues S. Chipping behaviour of all-ceramic crowns with zirconia framework and CAD/CAM 2012;40:154-62. veneer. J Dent
7. Uludamar A, Aygün Ş, Kulak Özkan Y. Zirkonya esaslı tam seramik restorasyonlar. Atatürk Üniv Diş Hek Fak Derg 2012;5:132-41.
8. Beuer F, Schweiger J, Eichberger M, Kappert HF, Gernet W, Edelhoff D. High-strength CAD/CAM- fabricated veneering material sintered to zirconia copings - A new fabrication mode for all-ceramic restorations. Dent Mater 2009;25:121-8.

9. Kanat B, Çömlekoğlu ME, Çömlekoğlu Dündar M, Şen BH, Özcan M, Güngör MA. Effect of Various Veneering Techniques on Mechanical Strength of Computer-Controlled Zirconia Framework Designs. J Prosthodont 2014;23:445-55.
10. Kanat B. Farklı yöntemlerle üst yapıları hazırlanan zirkonya destekli kron restorasyonlarının kırılma dayanımlarının araştırılması. Ege Üniversitesi Sağlık Bilimleri Enstitüsü, Protetik Diş Tedavisi Anabilim Dalı Doktora Tezi, 2013.
11. Van Noort R. The future of dental devices is digital. Dent Mater 2012;28:3-12.
12. Asgar K. Casting metals in dentistry: past - present – future. Adv Dent Res 1988;2:33-43.
13. Höland, AW, Strub JR, Scharer P. Metal ceramic and considerations. Int J Prosthodont 1989;2:13-26.
14. Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: current systems and future possibilities. J Am Dent Assoc 2006;137:1289-96.
15. Mörmann W, Bindle A. All-ceramic chair- side computer-aided design/computer-aided machining restorations. Dent Clin North Am 2002;46:405-26.
16. Beuer F, Schweiger J, Edelhoff D. CAD/CAM in dentistry: New Materials and Technologies. Dentistry 2010;2.
17. Mörmann WH. The evolution of the CEREC system. J Am Dent Assoc 2006;137:7S-13S.
18. CAD/CAM solutions for the dental laboratory. inLab. The art of innovative dental technology. http://www.sirona.com/en/epaper-inlab/.
19. Mehl A, Hickel R. Current state of development and perspectives of machine-based production methods for dental restorations. Int J Comput Dent 1999;2:9-35.
20. Guess PC, Bonfante EA, Silva NR, Coelho PG, Thompson VP. Effect of core design and veneering technique on damage and reliability of Y-TZP- supported crowns. Dent Mater 2013;29:307-16.
21. Luthardt VR, Rudolph H, Sandkuhl O, Walter M. Aktuelle CAD/CAM-Systeme zur Herstellung von keramischem Zahnersatz Einleitung.
22. http://www2.spitta.de/Zahnmedizin/Aktuelles/Druckan sicht/134_index+M54caf1a9105.html.
23. Goiato MC, Santos MR, Pesqueira AA, Moreno A, dos Santos DM, Haddad MF. Prototyping for surgical and prosthetic treatment. J Craniofac Surg 2011;22:914-7.
24. Chang PSH, Parker TH, Patrick CW Jr, Miller MJ. The accuracy of stereolithography in planning craniofacial bone replacement. J Craniofac Surg 2003;14:164-70.
25. Santos EC, Shiomi M, Osakada K, Laoui T. Rapid manufacturing of metal components by laser forming. International Journal of Machine Tools and Manufacture 2006;46:1459-68.
26. Çelik İ, Karakoç F, Çakır MC, Duysak A. Hızlı prototipleme teknolojilerive uygulama alanları. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi 2013;31:53-70.
27. Stawarczyk B, Özcan M, Roos M, Trottmann A, Sailer I, Hämmerle CHF. Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques. Dent Mater 2011;27:1045-53.
28. Liu Y, Feng H, Bao Y, Qiu Y, Xing N, Shen Z. Fracture and interfacial delamination origins of bilayer ceramic composites for dental restorations. J Eur Ceram Soc 2010;30:1297-305.
29. Fairhurst CW, Hashinger DT, Twigs SW. The effect of thermal history on porcelain expansion behavior. J Dent Res 1989;68:1313-8.
30. Eisenburger M, Mache T, Borchers L, Stiesch M. Fracture stability of anterior zirconia crowns with different core designs and veneered using the layering or the press-over technique. Eur J Oral Sci 2011;119:253-7.
31. Kurbad A. Digital veneering--manufacturing computer-generated veneers with the CAD-on technique. Int J Comput Dent 2011;14:255-71.
32. LAVATM DVS Digital veneering system. Full Contour Digital Crown.
33. http://multimedia.3m.com/mws/mediawebserver?mws Id=66666UF6EVsSyXTtnxTt4XMtEVtQEVs6EVs6EVs 6E666666--&fn=lava_dvs_lab_brochure.pdf.
34. Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J 2009;28:44-56.
35. Lorenzoni FC, Martins LM, Silva NR, Coelho PG, Guess PC, Bonfante EA, Thompson VP, Bonfante G. Fatigue life and failure modes of crowns systems with a modified framework design. J Dent 2010;38:626-34.
36. Sundh A, Molin M, Sjögren G. Fracture resistance of yttrium oxide partially-stabilized zirconia all- ceramic bridges after veneering and mechanical fatigue testing. Dent Mater 2005;21:476-82.