ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ

İşıl Sarıkaya; Ceyda Güleç

doi:10.17567/ataunidfd.473285

ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ

Öz

Amaç: Estetik restoratif CAD/CAM kompoziti (Lava Ulti- mate; 3M ESPE, St.Paul, ABD) ve hibrit seramik materya- linin (Vita Enamic, Vita Zahnfabrik, Almanya) translüsensi ve renk stabilitesi hakkında yeterli bilgi bulunmamaktadır. Bu çalışmanın amacı, restorative CAD/CAM materyallerinin translüsensi ve renk stabilitesini araştırmaktır.

Gereç ve Yöntem: Onar örnekten oluşan dört grup, 1 mm kalınlığında hibrit seramik ve rezin nanoseramik kompozit rezin monolitik bloklardan hazırlandı. Test edilen tüm materyaller için 2M2, yüksek translüsensili bloklar seçildi. Yüzey bitirmelerinde Lava Ultimate örnekler için Sof-Lex (3M ESPE, St.Paul, ABD) diskler, Vita Enamic için Vita Enamic polishing set (Vita Enamic, Vita Zahnfabrik, Almanya) kullanıldı. Örneklerin her iki yüzüne de polisaj uygulandı. Translüsensi parametresi ve renk farklılıkları, örnekler 48 saat kahve solüsyonunda bekletilmeden önce ve sonrasında CIE L*a*b* sisteminde spektrofotometre (Vita Easy Shade, Vita Zahnfabrik, Almanya) ile ölçüldü. Veriler Mann-Whitney U testi ile incelendi (p<.05).

Bulgular: Lava ve Vita Enamic kontrol grupları arasında anlamlı fark görülmedi (p=1). Kahve solüsyonunda bekletilme sonrasında CAD/CAM materyallerin translüsensi parametresi değerleri azalırken ∆E renk farklılıklarında artış gözlendi. Kahvede bekletilme sonrasında Lava Ultimate (10.9±1), Vita Enamic’den (9.1±0.7) daha yüksek translüsensi parametresi değeri sergiledi. Ayrıca kahvede bekletilen Lava Ultimate örneklerin ∆E değeri (∆E=3.4) Vita Enamic’den (∆E=1.8) daha fazla ve eşik değerin (∆E=2.7) üstünde ölçüldü.

Sonuç: Çalışmamızda Lava Ultimate daha yüksek translü- sensi değeri sergiledi ancak daha fazla renk değişimi gösterdi.

Anahtar Kelimeler: Translüsensi, Renk Stabilitesi, CAD/CAM

EVALUATION OF TRANSLUCENCY AND COLOR STABILITY OF ESTHETIC CAD/CAM RESTORATIVE MATERIALS

ABSTRACT

Aim: Adequately information is not available about the translucency and color stability of esthetic restorative CAD/CAM composite (LAVA Ultimate, 3M ESPE, StPaul, USA) and hybrid ceramic material (VITA Enamic, Vita Zahnfabrik, Germany). The purpose of this study was to investigate the translucency and color stability of restorative CAD/CAM materials.

Material and Methods: Four groups consist of 10 specimens, were prepared with 1 mm thickness of hybrid ceramic and resin nano ceramic composite resin monolithic blocks. 2M2 high translucent blocks were chosen for all tested materials. Surface finishing was performed with Sof-Lex (3M ESPE, StPaul, USA) discs for Lava Ultimate specimens and Vita Enamic polishing set (VITA Enamic, Vita Zahnfabrik, Germany) was used for Vita Enamic. The polishing procedures were performed on both sides of the specimens. Translucency parameter and color differences were measured in the CIE L*a*b* system by spectrophotometer (Vita Easy Shade, Vita Zahnfabrik, Germany) before and after 48 hours of immersion in a coffee solution. Data were analyzed with Mann-Whitney U test (p<.05).

Results: There was no significant difference between the Lava control group and Vita Enamic control group (p=1). After immersion of coffee solution, translucency parameter values of CAD/CAM materials were decreased and increased ∆E color differences were observed. Significant differences were found among coffee groups for all specimens tested (p<.001). After coffee immersion, Lava Ultimate showed higher translucency parameter value (10.9±1) than Vita Enamic (9.1±0.7). Also, ∆E values of Lava Ultimate (∆E=3.4) specimens which stored in coffee solution were higher than Vita Enamic (∆E=1.8), and were over than threshold ∆E (∆E=2.7).

Conclusion: Lava Ultimate showed more translucency parameter value, but also showed more staining in our study.

Keywords: Translucency; Color Stability; CAD/CAM

Anahtar Kelimeler

Translüsensi,Renk Stabilitesi

Kaynakça

1. Barutcigil Ç, Harorlı OT, Yıldız M, Özcan E, Arslan H, Bayındır F. The color differences of direct esthetic restorative materials after setting and compared with a shade guide. JADA 2011;142:658-65.
2. Doğan A, Yüzügüllü B. Renk seçiminde güncel teknolojik gelişmeler [Recent technological developments in color selection]. Atatürk Üniv. Diş Hek. Fak. Derg. 2011;4:65-72.
3. Shillingburg HT, Hobo S, Whitsett LD, Brackett SE. Fundamentals of Fixed Prosthodontics. 3rd ed. Londra; Quintessence Publishing Co Inc:2010. p. 433.
4. Coldea A, Swain MV, Thiel N. Mechanical properties of polymer-infiltrated-ceramic-network materials. Dent Mater 2013;29:419-26.
5. Seghi R, Johnston W, O'Brien W. Performance assessment of colorimetric devices on dental porcelains. J Dent Res 1989;68:1755-9.
6. Heydecke G, Zhang F, Razzoog ME. In vitro color stability of double-layer veneers after accelerated aging. J Prosthet Dent 2001;85:551-7.
7. Barizon KT, Bergeron C, Vargas MA, Qian F, Cobb DS, Gratton DG et al. Ceramic materials for porcelain veneers. Part I: Correlation between translucency parameters and contrast ratio. J Prosthet Dent 2013;110:397-401.
8. Commission Internationale de l’Eclairage (CIE). CIE technical report: colorimetry. [CIE Pub No.15.3]. 2004.

9. Joiner A. Tooth colour: A review of the literature. J Dent, 2004;32:3-12.
10. Powers JM, Sakaguchi RL. Optical, thermal, and electrical properties, In: Craig’s Restorative Dental Materials, 12 Ed, Missouri; Mosby:2006. p.28-50.
11. Güler AU, Güler E, Yücel AÇ, Ertaş E. Effects of polishing procedures on color stability of composite resins. J Appl Oral Sci. 2009;17:108-12.
12. Ragain JC, Johnston WM. Minimum color differences for discriminating mismatch between composite and tooth color. J Esthet Restor Dent 2001;13:41-8.
13. Johnston W, Kao E. Assessment of appearance match by visual observation and clinical colorimetry. J Dent Res 1989;68:819-22.
14. O'Brien WJ. Dental materials and their selection. 3rd Ed. Chicago; Quintessence Publishing Co Inc: 2008. p. 24-36.
15. Douglas RD, Brewer JD. Acceptability of shade differences in metal ceramic crowns. J Prosthet Dent 1998;79:254-60.
16. Ishikawa-Nagai S, Yoshida A, Sakai M, Kristiansen J, Da Silva JD. Clinical evaluation of perceptibility of color differences between natural teeth and all-ceramic crowns. J Dent 2009;37:57-63.
17. Vichi A, Louca C, Corciolani G, Ferrari M. Color related to ceramic and zirconia restorations: A review. Dent Mater 2011;27:97-108.
18. Acar O, Yılmaz B, Altıntas SH, Chandrasekaran I, Johnston WM. Color stainability of CAD/CAM and nanocomposite resin materials. J Prosthet Dent 2016;115:71-5.
19. Bagheri R, Burrow MF, Tyas M. Influence of food-simulating solutions and surface finish on susceptibility to staining of aesthetic restorative materials. J Dent 2005;33:389-98.
20. Della Bona A, Corazza PH, Zhang Y. Characterization of a polymer-infiltrated ceramic-network material. Dent Mater 2014;30:564-9.
21. Koller M, Arnetzl GV, Holly L, Arnetzl G. Lava ultimate resin nano ceramic for CAD/ CAM: Customization case study. Int J Comput Dent 2012;15:159-64.
22. Mainjot A, Dupont N, Oudkerk J, Dewael T, Sadoun M. From Artisanal to CAD-CAM Blocks State of the Art of Indirect Composites. J Dent Res 2016;95:487-95.
23. Belli R, Geinzer E, Muschweck A, Petschelt A, Lohbauer U. Mechanical fatigue degradation of ceramics versus resin composites for dental restorations. Dent Mater 2014;30:424-32. 24. Vasudeva G. Monomer systems for dental composites and their future: a rewiev. J Calif Dent Assoc 2009;37:389-98.
25. Gajewski VE, Pfeifer CS, Froes-Salgado NR, Boaro LC, Braga RR. Monomers used in resin composites: degree of conversion, mechanical properties and water sorption/solubility. Braz Dent J 2012;23:508-14.
26. Stawarczyk B, Sener B, Trottmann A, Roos M, Ozcan M, Hammerle CH. Discoloration of manually fabricated resins and industrially fabricated CAD/ CAM blocks versus glass-ceramic: effect of storage media, duration, and subsequent polishing. Dent Mater J 2012;31:377-83.
27. Van Noort R. Introduction to dental materials. 4th Edition: Elsevier Inc. Mosby Ltd; 2013. p. 231-46.
28. Awad D, Stawarczyk B, Liebermann A, Ilie N. Translucency of esthetic dental restorative CAD/CAM materials and composite resins with respect to thickness and surface roughness. J Prosthet Dent 2015;113:534-40.
29. Arocha MA, Basilio J, Llopis J, Bella ED, Roig M, Ardu S, Mayoral JR. Colour stainability of indirect CAD–CAM processed composites vs. conventionally laboratory processed composites after immersion in staining solutions. J Dent 2014;42:831–8 . 30. Pop-Ciutrila IS, Dudea D, Eugenia BM, Moldovan M, Cîmpean SI, Ghinea R. shade correspondence, color, and translucency differences between human dentine and a CAD/CAM Hybrid ceramic system. J Esthet Restor Dent 2016;28:46-55.
31. Gouveia THN, Publio JC, Ambrosano GMB, Paulillo LA, Aguiar FH, Lim DA. Effect of bleaching on physical properties of a composite resin. Eur J Dent 2016;10:82-91.

Ayrıntılar

Birincil Dil

Türkçe

Konular

Sağlık Kurumları Yönetimi

Bölüm

Araştırma Makalesi

Yazarlar

İşıl Sarıkaya
0000-0002-2172-4724

Ceyda Güleç Bu kişi benim
0000-0002-8973-1920

Yayımlanma Tarihi

11 Temmuz 2018

Gönderilme Tarihi

19 Eylül 2016

Kabul Tarihi

2 Aralık 2016

Yayımlandığı Sayı

Yıl 2018 Cilt: 28 Sayı: 3

DOI

https://doi.org/10.17567/ataunidfd.473285

IZ

https://izlik.org/JA25PU65RH

Kaynak Göster

RIS / Bibtex

APA

Sarıkaya, İ., & Güleç, C. (2018). ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 28(3), 365-370. https://doi.org/10.17567/ataunidfd.473285

AMA

1.Sarıkaya İ, Güleç C. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. 2018;28(3):365-370. doi:10.17567/ataunidfd.473285

Chicago

Sarıkaya, İşıl, ve Ceyda Güleç. 2018. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28 (3): 365-70. https://doi.org/10.17567/ataunidfd.473285.

EndNote

Sarıkaya İ, Güleç C (01 Temmuz 2018) ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28 3 365–370.

IEEE

[1]İ. Sarıkaya ve C. Güleç, “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”, Ata Diş Hek Fak Derg, c. 28, sy 3, ss. 365–370, Tem. 2018, doi: 10.17567/ataunidfd.473285.

ISNAD

Sarıkaya, İşıl - Güleç, Ceyda. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 28/3 (01 Temmuz 2018): 365-370. https://doi.org/10.17567/ataunidfd.473285.

JAMA

1.Sarıkaya İ, Güleç C. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. 2018;28:365–370.

MLA

Sarıkaya, İşıl, ve Ceyda Güleç. “ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, c. 28, sy 3, Temmuz 2018, ss. 365-70, doi:10.17567/ataunidfd.473285.

Vancouver

1.İşıl Sarıkaya, Ceyda Güleç. ESTETİK RESTORATİF CAD/CAM MATERYALLERİN TRANSLÜSENSİ VE RENK STABİLİTESİNİN DEĞERLENDİRİLMESİ. Ata Diş Hek Fak Derg. 01 Temmuz 2018;28(3):365-70. doi:10.17567/ataunidfd.473285

Cited By

The Effects of Coffee and Energy Drink on Color Stability of Hybrid Ceramics

European Annals of Dental Sciences

https://doi.org/10.52037/eads.2021.0006

Optical Properties of Novel Resin Matrix Ceramic Systems at Different Thicknesses

Cumhuriyet Dental Journal

https://doi.org/10.7126/cumudj.512729