SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY

Sultan Keleş; Sera Şimşek Derelioğlu

doi:10.17567/ataunidfd.522693

SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY

Öz

ABSTRACT

Aim: This study assessed the shear bond strength of a nanohybrid composite resin and a compomer to Biodentine^® using three bonding systems (total-etch one-bottle, one and two- step self-etch).

Material and Methods: A total of ninety customized acrylic blocks were prepared and 4-mm diameter × 2-mm deep holes were instrumented in all blocks. The holes were filled with Biodentine^®. Dividing the blocks into 6 groups, Groups 1–3 had compomer placed over the Biodentine^® with Clearfil SE Bond^®, Prime&Bond NT^® universal testing machine, or Clearfil Universal Bond^®, respectively; Groups 4–6 were restored with composite using the same adhesives. A universal testing device determined the shear bond strength, and the fractures were examined with a stereomicroscope. Obtained data were analyzed with a two-way ANOVA and Tukey post-hoc tests.

Results: The composite’s mean shear bond strength to Biodentine^® was significantly higher (p <0.05) than the compomer’s. The bond strength was found to be higher in using with the two-step self-etch adhesive system for both restorative materials (p <0.05). The highest bond (14.10 ± 2.83 MPa) was achieved in Group 4, while Group 2 was the lowest (8.25 ± 0.97MPa).

Conclusion: The bonding to Biodentine^® was affected by both the restorative material and adhesive system. Composite resins applied with the different adhesive systems had higher shear bond strengths than did compomer with the same adhesives. Additionally, the two-step self-etching adhesive system was more likely to obtain high shear bond strength irrespective of the restorative material (compomer or composite).

Keywords: Tricalcium silicate, composite resins, compomers, adhesives

BİODENTİNE’İN^® ÇEŞİTLİ BAĞLAYICI AJANLARLA KOMPOMER VE KOMPOZİTE BAĞLANMA DAYANIMI: BİR İN-VİTRO ÇALIŞMA

ÖZ

Amaç: Bu çalışmada, Biodentine^®’in üç farklı çeşitteki dentin bağlayıcı ajan (total etch, tek ve iki aşamalı self-etch adeziv sistemler) kullanılarak bir nanohibrit kompozit rezine ve bir kompomere olan bağlanma dayanımı değerlendirilmiştir.

Gereç ve Yöntem: Doksan adet akrilik blok oluşturuldu ve bu bloklarda her birinde çapı 4 mm, derinliği 2 mm olan boşluklar oluşturuldu. Bütün boşluklar Biodentine^®’le dolduruldu. Örnekler 6 gruba ayrıldı. Grup 1’de Biodentine^®’in üzerine Clearfil SE Bond^® ile kompomer; Grup 2’de Biodentine^®’in üzerine Prime&Bond NT^® ile kompomer; Grup 3’de Biodentine^®’in üzerine Clearfil Universal Bond^® ile kompomer; Grup 4’de Biodentine^®’in üzerine Clearfil SE Bond^® ile kompozit; Grup 5’de Biodentine^®’in üzerine Prime&Bond NT^® ile kompozit; Grup 6’da Biodentine^®’in üzerine Clearfil Universal Bond^® ile kompozit uygulandı. Bağlanma dayanımı universal test cihazıyla belirlendi ve başarısızlığa uğramış yüzeyler steromikroskopla incelendi. Veriler iki yönlü ANOVA ve Tukey Çoklu Karşılaştırma testleriyle analiz edildi (a= 0.05).

Bulgular: Kompozit rezinin biodentine bağlanma dayanı- mı kompomerden daha yüksek olarak bulunmuş- tur(p<0.05). İki aşamalı self-etch adeziv system, her restoratif materyal için diğer adezivlerden daha yüksek bağlanma dayanımı göstermiştir (p<0.05). Biodentine^® en yüksek bağlanma dayanımı (14.10±2.83 MPa) G-4’den (kompozit ile Clearfil SE Bond^®) ve en düşük bağlanma dayanımı (8.25±0.97MPa) G-2’den (kompomer ile Prime&Bond NT^® ) edilmiştir.

Sonuç: Biodentine^®’in bağlanma dayanımı kullanılan bağlayıcı ajan ve restoratif materyalin tipinden etkilen- miştir. Farklı çeşitteki bağlayıcı ajanlarla uygulanan kom- pozit rezin, Biodentine^® kompomerden yüksek bağlanma dayanımı göstermiştir. İlaveten, iki aşamalı self-etch adeziv sistem hem kompomer hem de kompozit rezinle uygulandığında Biodentine^® yüksek bağlanma dayanımı elde edilmiştir.

Anahtar Kelimeler: Trikalsiyum silikat, kompozit rezinler, kompomerler, adezivler

Anahtar Kelimeler

Tricalcium silicate,composite resins,compomers

Kaynakça

1. Bogen G, Chandler NP. Pulp preservation in immature permanent teeth. Endod Top 2010;23:131–52.
2. Rajasekharan S, Martens LC, Cauwels RGEC, Verbeeck RMH. BiodentineTM material characteristics and clinical applications: a review of the literature. Eur Arch Paediatr Dent 2014;15:147–158.
3. Gokcek M, Hazar BE. Vital pulpa tedavilerinde güncel yaklaşımlar. Atatürk Üniv Diş Hek Fak Derg 2015;25:118-29.
4. Koubi G, Colon P, Franquin JC, Hartmann A. Clinical evaluation of the performance and safety of a new dentine substitute, Biodentine, in the restoration of posterior teeth - a prospective study. Clin Oral Investig 2013;17:243–9.
5. Shayegan A, Jurysta C, Atash R, Petein M, Abbeele A Vanden. Biodentine used as a pulp-capping agent in primary pig teeth. Pediatr Dent 2012;34:202-8.
6. Cuadros-Fernández C, Lorente Rodríguez AI, Sáez-Martínez S, García-Binimelis J, About I, Mercadé M. Short-term treatment outcome of pulpotomies in primary molars using mineral trioxide aggregate and Biodentine: a randomized clinical trial. Clin Oral Investig 2016;20:1639–45.
7. Nowicka A, Wilk G, Lipski M, Kołecki J, Buczkowska-Radlińska J. Tomographic Evaluation of reparative dentin formation after direct pulp capping with ca(oh)2, mta, biodentine, and dentin bonding system in human teeth. j Endod 2015;41:1234–40.
8. Prati C, Gandolfi MG. Calcium silicate bioactive cements: Biological perspectives and clinical applications. Dent Mater 2015;31:351–70.

9. Kindelan SA, Day P, Nichol R, Willmott N, Fayle SA. UK National Clinical Guidelines in Paediatric Dentistry: stainless steel preformed crowns for primary molars. Int J Paediatr Dent 2008;18 :20–8.
10. Al-Ashou WMO, Nayif MM, Yahya MM. Shear bond strength of glass and resin based restorative materials to calcium based cement (Biodentine). Int J Enhanc Res Sci Technol Eng 2014;3:400–4.
11. Odabaş ME, Bani M, Tirali RE. Shear bond strengths of different adhesive systems to biodentine. Sci World J 2013;2013:1-5.
12. Kaup M, Dammann CH einrich, Schäfer E, Dammaschke T. Shear bond strength of Biodentine, ProRoot MTA, glass ionomer cement and composite resin on human dentine ex vivo. Head Face Med 2015;11:14.
13. Trope M. Regenerative potential of dental pulp. J Endod 2008;30:206-10.
14. Pranov PD, Manoj C, Manvar NU, Anuja ID, Aditya PS JP. Comparative evaluation of effect of two different bonding systems on shear bond strength of composite and compomer to mineral trioxide aggregate: an ın vitro study. J Int Oral Heal 2015;7:93–5.
15. Cengiz E, Ulusoy N. Microshear bond strength of tri-calcium silicate-based cements to different restorative materials. J Adhes Dent 2016;18:1–7.
16. Aksoy S UM. Shear bond strength of universal adhesive systems to a bioactive dentin substitute (Biodentine®) at different time intervals. Stomatol Dis Sci 2017;1:166–22.
17. Çolak H, Tokay U, Uzgur R, Uzgur Z, Ercan E, Hamidi MM. The effect of different adhesives and setting times on bond strength between Biodentine and composite. J Appl Biomater Funct Mater 2016;14:217–22.
18. Hashem DF, Foxton R, Manoharan A, Watson TF, Banerjee A. The physical characteristics of resin composite-calcium silicate interface as part of a layered/laminate adhesive restoration. Dent Mater 2014;30:343–9.
19. Tosun G, Koyuturk AE, Sener Y, Sengun A. Bond strength of two total-etching bonding systems on caries-affected and sound primary teeth dentin. Int J Paediatr Dent 2008;18:62–9.
20. El-Kalla IH, García-Godoy F. Bond strength and interfacial micromorphology of compomers in primary and permanent teeth. Int J Paediatr Dent 1998;8:103–14.
21. Deepa V, Dhamaraju B, Bollu I, Balaji T. Shear bond strength evaluation of resin composite bonded to three different liners: TheraCal LC, Biodentine, and resin-modified glass ionomer cement using universal adhesive: An in vitro study. J Conserv Dent 2016;19:166-70.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Sağlık Kurumları Yönetimi

Bölüm

Araştırma Makalesi

Yazarlar

Sultan Keleş
0000-0001-7978-8715

Sera Şimşek Derelioğlu Bu kişi benim
0000-0001-5192-923X

Yayımlanma Tarihi

15 Ocak 2019

Gönderilme Tarihi

19 Şubat 2018

Kabul Tarihi

16 Temmuz 2018

Yayımlandığı Sayı

Yıl 2019 Cilt: 29 Sayı: 1

DOI

https://doi.org/10.17567/ataunidfd.522693

IZ

https://izlik.org/JA46MR24FT

Kaynak Göster

RIS / Bibtex

APA

Keleş, S., & Şimşek Derelioğlu, S. (2019). SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, 29(1), 49-54. https://doi.org/10.17567/ataunidfd.522693

AMA

1.Keleş S, Şimşek Derelioğlu S. SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY. Ata Diş Hek Fak Derg. 2019;29(1):49-54. doi:10.17567/ataunidfd.522693

Chicago

Keleş, Sultan, ve Sera Şimşek Derelioğlu. 2019. “SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 29 (1): 49-54. https://doi.org/10.17567/ataunidfd.522693.

EndNote

Keleş S, Şimşek Derelioğlu S (01 Ocak 2019) SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 29 1 49–54.

IEEE

[1]S. Keleş ve S. Şimşek Derelioğlu, “SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY”, Ata Diş Hek Fak Derg, c. 29, sy 1, ss. 49–54, Oca. 2019, doi: 10.17567/ataunidfd.522693.

ISNAD

Keleş, Sultan - Şimşek Derelioğlu, Sera. “SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi 29/1 (01 Ocak 2019): 49-54. https://doi.org/10.17567/ataunidfd.522693.

JAMA

1.Keleş S, Şimşek Derelioğlu S. SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY. Ata Diş Hek Fak Derg. 2019;29:49–54.

MLA

Keleş, Sultan, ve Sera Şimşek Derelioğlu. “SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY”. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, c. 29, sy 1, Ocak 2019, ss. 49-54, doi:10.17567/ataunidfd.522693.

Vancouver

1.Sultan Keleş, Sera Şimşek Derelioğlu. SHEAR BOND STRENGTH OF COMPOSITE AND COMPOMER TO BIODENTINE® APPLIED WITH VARIOUS BONDING AGENTS: AN IN-VITRO STUDY. Ata Diş Hek Fak Derg. 01 Ocak 2019;29(1):49-54. doi:10.17567/ataunidfd.522693

Cited By

SURFACE MICROHARDNESS AND ROUGHNESS PROPERTIES OF BIODENTINE

Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi

https://doi.org/10.17567/ataunidfd.658069

Investigation on the Effect of Blood Contamination of Calcium Silicate-Based Pulp Capping Materials Hardened at Different Times on Shear Bond Strength

Cumhuriyet Dental Journal

https://doi.org/10.7126/cumudj.1007704

SHEAR BOND STRENGTH OF DIFFERENT CALCIUM SILICATE BASED CEMENTS TO COMPOSITE AND COMPOMER

Meandros Medical And Dental Journal

https://doi.org/10.69601/meandrosmdj.1562662