SİMÜLE KÖK KANALLARINDA BEŞ FARKLI NİKEL-TİTANYUM DÖNER ALETİN ŞEKİLLENDİRME YETENEĞİ

Yıl 2014, Cilt: 24 Sayı: 1, 58 - 66, 11.02.2015

Hakan Göktürk Ali Yücel Aziz Şişman

https://doi.org/10.17567/dfd.46691

Öz

Amaç: Bu çalışmanın amacı dört adet güncel alet  (HeroShaper, Mtwo, ProTaper, RaCe) ile yakın tarihte üretilmiş bir aletin (Revo-S) şekillendirme yeteneklerinin simüle kök kanallarında karşılaştırılmasıdır.  Gereç ve yöntem: Nikel-Titanyum sistemler S şekilli ve 34-35° eğimli şeffaf rezin blokların (her bir grup için n=15 rezin blok) genişletilmesinde kullanıldı.  Kaldırılan rezin miktarı bir stereomikroskop altında işlem öncesi ve sonrası görüntüler karşılaştırılarak ölçüldü. Transportasyonun yönü ve miktarı, merkezde kalma yeteneği ve toplamda kaldırılan rezin miktarı tespit edildi. Kanaldan sapma insidansı, preparasyon zamanı ve alet deformasyonu kaydedildi.  Bulgular: RaCe grubu her iki kanal tipinde kanalları daha hızlı bir şekilde (P < 0.05) ve kanalda sapma oluşturmadan genişletti. ProTaper Universal grubu her iki kanal tipi için diğer gruplardan anlamlı şekilde yavaştı (P < 0.05). Gittikçe genişleyen kanal formu 34-35° eğimli kök kanallarında Mtwo, ProTaper Universal ve RaCe gruplarında, S şekilli kanallarda ise sadece RaCe grubunda gözlendi. HeroShaper, Mtwo ve Revo-S gruplarında hiç alet kırığı tespit edilmezken bazı eğelerde deformasyon gözlendi.  Sonuç: RaCe Nikel-Titanyum döner aletleri muhtemelen değişken kesici kenarlara sahip üçgen kesitleri ve çok sayıda aleti kapsayan eğe serisi nedeniyle daha az kanaldan sapma ve daha merkezi bir şekillendirme ortaya koydu.

Anahtar Kelimeler

Nikel–Titanyum döner aletler, RaCe, Revo-S, S-şekilli simüle kanal

THE SHAPING ABILITY OF FIVE DIFFERENT NICKEL-TITANIUM ROTARY INSTRUMENTS IN SIMULATED ROOT CANALS

Öz

 Purpose: The aim of this study was to compare the shaping ability of a recently introduced instrument (RevoS) in comparison with the four current instruments (HeroShaper, Mtwo, ProTaper, RaCe) in simulated root canals.  Material and methods: Nickel-Titanium systems (n=15 resin in each case) were used to prepare 34-35° curved and S-shaped simulated root canals in clear resin blocks. The width of resin removal was measured by comparing the pre- and postoperative images under a stereomicroscope. The amount and direction of transportation, the centering ability and the total amount of resin removal were determined. Canal aberration incidence, preparation time, and instrument deformation were also recorded.  Results: In both canal types, the RaCe group prepared canals more rapidly (P < 0.05) and created no canal aberrations.  The ProTaper Universal group was significantly slower than other groups (P < 0.05) for both canal types. The tapered canal form was obtained in the Mtwo, ProTaper Universal; and RaCe groups in 34-35° curved canals; and only the RaCe group in S-shaped canals. Some deformations but no instrument fractures were observed for HeroShaper, Mtwo, and Revo-S groups.  Conclusion: RaCe rotary Nickel-Titanium instruments, probably do to their triangular cross-sectional shape with alternating cutting edges and sequence encompassing a high number of instruments, exhibited a better centrally shaping and fewer canal aberrations.

Anahtar Kelimeler

Nickel–Titanium Rotary Instruments, RaCe

Kaynakça

• Schilder H. Cleaning and shaping the root canal. Dent Clin Sao Paulo Brazil. 1974;18:269-96.
• Schäfer E, Florek H. Efficiency of rotary nickel- titanium K3 instruments compared with stainless steel hand K-Flexofile. Part 1. Shaping ability in simulated 2003;36:199-207. Int Endod J.
• Walia HM, Brantley WA, Gerstein H. An initial investigation of the bending and torsional properties of Nitinol root canal files. J Endod. 1988;14:346-51.
• Buchanan LS. The standardized-taper root canal preparation--Part 1. Concepts for variably tapered shaping instruments. Int Endod J. 2000;33:516-29.
• Cunningham CJ, Senia ES. A three-dimensional study of canal curvatures in the mesial root of mandibular molars. J Endod. 1992;18:294-300.
• Gu Y, Lu Q, Wang P, Ni L. Root canal morphology of permanent three-rooted mandibular first molars: Part II--measurement of root canal curvatures. J Endod. 2010;36:1341-6.
• Yoshimine Y, Ono M, Akamine A. The shaping effects of three nickel-titanium rotary instruments in simulated S-shaped canals. J Endod. 2005;31:373-5.
• Ersev H, Yilmaz B, Ciftçioğlu E, Ozkarsli SF. A comparison of the shaping effects of 5 nickel- titanium rotary instruments in simulated S-shaped canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2010;109:86-93.
• Bergmans L, Van Cleynenbreugel J, Beullens M, Wevers M,Van Meerbeek B, Lambrechts P. Progressive versus constant tapered shaft design using NiTi rotary instruments. Int Endod J. 2003;36:288-95.
• Schäfer E, Vlassis M. Comparative investigation of two rotary nickel-titanium instruments: ProTaper versus RaCe. Part 1. Shaping ability in simulated curved canals. Int Endod J. 2004;37:229-38.
• Paqué F, Musch U, Hülsmann M. Comparison of root canal preparation using RaCe and ProTaper rotary instruments. Int Endod J. 2005;38:8-16.
• Schäfer E, Erler M, Dammaschke T. Comparative study on the shaping ability and cleaning efficiency of rotary Mtwo instruments. Part 1. Shaping ability in simulated curved canals. Int Endod J. 2006;39:196-202.
• Aydin C, Inan U, Yasar S, Bulucu B, Tunca YM. Comparison of shaping ability of RaCe and Hero Shaper instruments in simulated curved canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008;105:92-7.
• Basrani B, Roth K, Sas G, Kishen A, Peters OA. Torsional profiles of new and used revo-s rotary instruments: an in vitro study. J Endod. 2011;37:989-92.
• Hashem AA, Ghoneim AG, Lutfy RA, Foda MY, Omar GA. Geometric Analysis of Root Canals Prepared by Four Rotary NiTi Shaping Systems. J Endod. 2012;38:996-1000.
• Hülsmann M, Peters OA, Dummer PMH. Mechanical preparation of root canals: shaping goals, techniques and means. Endodontics Topics. 2005;10:30-76
• Powell S, Simon JS. A comparison of the effect of modified and non modified instrument tips on apical canal configuration. J Endod. 1986;12:293- 300.
• Patterson SS. In vivo and in vitro studies of the effect of the disodium salt of ethylenediamine tetra-acetate on human dentin and its endodontic implications. Oral Surgery Oral Medicine Oral Pathology 1963;16:83-103.
• Kum KY, Spängberg L, Cha BY, Il-Young J, Msd, Seung-Jong L, Chan-Young L. Shaping ability of three ProFile rotary instrumentation techniques in simulated resin root canals. J Endod. 2000;26:719- 23.
• Peters OA. Current challenges and concepts in the preparation of root canal systems: a review. J Endod. 2004;30:559-71.
• Rangel S, Cremonese R, Bryant S, Dummer P. Shaping ability of RaCe rotary nickel-titanium instruments in simulated root canals. J Endod. 2005;31:460-3.
• Schirrmeister JF, Strohl C, Altenburger MJ, Wrbas KT, Hellwig E Shaping ability and safety of five different compared instrumentation in simulated curved root canals. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2006;101:807-13. instruments with steel hand
• Wu MK, Fan B, Wesselink PR. Leakage along apical root fillings in curved root canals. Part I: effects of apical transportation on seal of root fillings. J Endod. 2000;26:210-6.
• Bonaccorso A, Cantatore G, Condorelli GG, Schäfer E, Tripi TR. Shaping ability of four nickel-titanium rotary instruments in simulated S-shaped canals. J Endod. 2009;35:883-6.
• Bryant ST, Dummer PM, Pitoni C, Bourba M, Moghal S. Shaping ability of .04 and .06 taper ProFile rotary nickel-titanium instruments in simulated root canals. Int Endod J. 1999;32:155- 64.
• Schäfer E, Erler M, Dammaschke T. Comparative study on the shaping ability and cleaning efficiency of rotary Mtwo instruments. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth. Int Endod J. 2006;39:203-12.
• Pasternak-Jşnior B, Sousa-Neto MD, Silva RG. Canal transportation and centring ability of RaCe rotary instruments. Int Endod J. 2009;42:499-506.
• Ruddle CJ. Advancements in the design of endodontic instruments for root canal preparation. Alpha Omegan. 2004;97:8-15.
• Ding-ming H, Hong-xia L, Cheung GS, Lan Z, Hong T, Xue-dong Z. Study of the progressive changes in canal shape after using different instruments by hand in simulated S-shaped canals. J Endod. 2007;33:986-9.
• Turpin YL, Chagneau F, Vulcain JM. Impact of two theoretical cross-sections on torsional and bending stresses of nickel-titanium root canal instrument models. J Endod. 2000;26:414-7.
• Gambarini G, Gerosa R, De Luca M, Garala M, Testarelli L. Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility. Oral Surg Oral Med Oral Pathol Oral Radiol Endod. 2008;105:798-800.
• Yang G, Yuan G, Yun X, Zhou X, Liu B, Wu H. Effects of two nickel-titanium instrument systems, Mtwo versus ProTaper universal, on root canal geometry tomography. J Endod. 2011;37:1412-6. by micro-computed
• Gergi R, Rjeily JA, Sader J, Naaman A. Comparison of canal transportation and centering ability of Twisted Files, Pathfile-ProTaper system, and stainless steel hand K-files by using computed tomography. J Endod. 2010;36:904-7.