GÜNCEL DENTAL BİLGİSAYAR DESTEKLİ TASARIM/BİLGİSAYAR DESTEKLİ ÜRETİM SİSTEMLERİ

Yıl 2015, Supplement 11, 129 - 136, 07.10.2015

Bilge Beşir Kalaycı Funda Bayındır

https://doi.org/10.17567/dfd.13212

Öz

Kırılma dayanımı yüksek seramik materyallerin üretilmesi ve bilgisayar teknolojisindeki ilerlemeler bilgisayar destekli tasarım/bilgisayar destekli üretim teknolojisinin gelişmesini sağlamıştır. Bu teknoloji hem dental laboratuvarlarda hem de dental kliniklerde, inley-onlay uygulamalarında, kron-köprü, implant abutment yapımında ve tam-ağız yapılandırılmasında kullanılmaktadır. Ayrıca CAD/CAM sistemler ortodontide de kullanılmaktadır. Birçok ileri derece geliştirilmiş chairside ve laboratuvar CAD/CAM sistemi üretilmiş veya geliştirilmektedir. Bu makale günümüz diş hekimliğinde kullanılan CAD/CAM teknolojilerine ve sistemlerine genel bir bakış açısı sağlamaktadır.

Anahtar Kelimeler

Bilgisayar yardımlı tasarım, bilgisayar yardımlı üretim, dental teknoloji

CONTEMPORARY DENTAL COMPUTER AIDED DESIGN/COMPUTER AIDED MANUFACTURE SYSTEMS

Öz

Processing of ceramic materials with high fracture resistance and new improvement in computer technology lead to development of dental computeraided design/computer-aided manufacturing technology. The technology, which is used in both the dental laboratory and the dental clinic, can be applied to inlays, onlays, crowns, fixed partial dentures, implant abutments, and even full-mouth reconstruction. CAD/CAM systems is also being used in orthodontics. Several highly advanced chairside and laboratory CAD/CAM systems have been introduced or are under development. This article provides an overview of CAD/CAM-technologies and systems available for dentistry today

Anahtar Kelimeler

Computer-aided design, computer-aided manufacture, dental technology

Kaynakça

• Rekow ED. Dental CAD/CAM systems: a 20-year success story. J Am Dent Assoc. 2006;137:5-6.
• McMillian P. Glass-Ceramics. 2. edition. London; Academic Press; 1979.
• Jedyrakiewicz N, Martin N. Cerec science, research and clinical application. Compend Contin Educ Dent. 2001;22:7-13.
• Hickel R, Dasch W, Mehl A, Kremers L. CAD/CAM-- fillings of the future. Int Dent J. 1997;47:247-58.
• Mehl A, Hickel R. Current state of development and perspectives of machine-based production methods for dental restorations. Int J Comput Dent.1999;2:9-35.
• Duret F, Blouin JL, Duret B. CAD-CAM in dentistry. J Am Dent Assoc. 1988;11:715-20.
• Christensen GJ. Computerized restorative dentistry. State of the art. J Am Dent Assoc. 2001;132:1301- 3.
• Liu PR. A panorama of dental CAD/CAM restorative systems. Compend Contin Educ Dent. 2005;507-8.
• Raigrodski AJ. Contemporary materials and technologies for all-ceramic fixed partial dentures: a review of the literature. J Prosthet Dent 2004;92:557-62.
• Tinschert J, Natt G, Hassenpflug S, Spiekermann H. Status of current CAD/CAM technology in dental medicine. Int J Comput Dent. 2004;7:25-45.
• Strub JR, Rekow ED, Witkowski S. Computer-aided design and fabrication of dental restorations: current systems and future possibilities. J Am Dent Assoc. 2006;137:1289-96.
• Luthardt RG, Holzhuter MS, Rudolph H, Herold V, Walter MH. CAD/CAM-machining effects on Y-TZP zirconia. Dent Mater. 2004;20:655-62.
• Uzun İH, Bayındır F. Dental uygulamalarda titanyum ve özellikleri. Atatürk Üniv. Diş Hek. Fak. Derg. 2010;20:213-20.
• Mormann WH, Bindl A. All-ceramic, chair-side computer-aided design/computer-aided machining restorations. Dent Clin North Am. 2002;46:405-26.
• Att W, Grigoriadou M, Strub JR. ZrO2 three-unit fixed partial dentures: comparison of failure load before and after exposure to a mastication simulator. J Oral Rehabil. 2007; 34:282-90.
• Miyazaki T, Hotta Y, Kunii J, Kuriyama S, Tamaki Y. A review of dental CAD/CAM: current status and future perspectives from 20 years of experience. Dent Mater J. 2009;28:44-56.
• Ersu B, Yüzügüllü B, Canay Ş. Sabit Restorasyonlarda Hacettepe Üniv Diş Hek Fak Derg 2008;32:58-72.
• Mörmann WH, Brandestini M. The fundamental inventive principles of CEREC CAD/CAM. In: Mörmann WH. State of the art of CAD/CAM restorations. 20 years of CEREC. Berlin; Quintessence: 2006.
• Cerec online. Cerec sw 423 update [online]. http://www.cereconline.com [Accessed 14 April 2014].
• Çelik G, Üşümez A, Sarı T. Bilgisayar destekli diş hekimliği Cumhuriyet Dent J 2013;16:74-82. CAD/CAM sistemleri.
• Rekow ED, Silva NR, Coelho PG, Zhang Y, Guess P, Thompson VP. Performance of dental ceramics: challenges for improvements. J Dent Res. 2011;90:937-52.
• Liu PR, Essig ME. Panorama of dental CAD/CAM restorative systemsCompend Contin Educ Dent. 2008;486-8.
• Kuraray Noritake Dental Inc. (2013) Katana CAD/CAM system [online]. Available from: http://www.noritake-dental.co.jp/katana/ system/system.html [Accessed 15 April 2013].
• Turkuaz Dental. Alliance Zirkonya Blok Broşür[online].http://turkuazdental.com/download/ pdf/alliance_brochure.pdf [Accessed 15 April 2013].
• Andersson M, Oden A. A new all-ceramic crown. A dense-sintered, high-purity alumina coping with porcelain. Acta Odontol Scand. 1993;51:59-64.
• Conrad HJ, Seong WJ, Pesun IJ. Current ceramic materials and recommendations: a systematic review. J Prosthet Dent 2007;98:389-404. with clinical
• Ural Ç. Diş hekimliği pratiğinde tamamı seramik ve Cad/Cam uygulamaları. Dirim Tıp Gazetesi 2011;86:27-38.
• Piwowarczyk A, Ottl P, Lauer HC, Kuretzky T. A clinical report and overview of scientific studies and clinical procedures conducted on the 3M ESPE Lava 2005;14:39-45. J Prosthodont.
• Technology HZ. Zirkonzahn product catalog [online]. Avaible from: http://www.zirkonzahn. com/assets/files/kataloge/EN-Catalogue-products- CADCAM-web.pdf. [Accessed 15 April 2013].
• AmannGirrbach Gmbh. Ceramill brochure [online]. Avaible com/fileadmin/_agweb/media/downloads/Prospekt e/Mall/Ceramill_Mall_GB.pdf. [Accessed 15 April 2013].