BOND STRENGTH OF SOFT LINING MATERIAL TO POLYAMIDE DENTURE MATERIAL

Yıl 2017, Cilt: 27 Sayı: 1, 34 - 38, 16.04.2017

Alper Özdoğan , Funda Bayındır Hamza Ulu

https://doi.org/10.17567/ataunidfd.307109

Öz

Aim: The aim of this study was to evaluate the bond strength of soft lining
material to polyamide denture material.

Materials and
Methods: Twenty-five polyamide denture base materials and soft
denture lining material were used in this study. The samples were divided into
five groups according to the surface treatments:

Group 1 (Control): No surface treatment

Group 2: Samples were sandblasted with 5o µm Al₂O₃
powder.

Group 3: Samples were grinded with a diamond bur.

Group 4: Samples were etched with % 37 Orthophosphoric
acid.

Group 5: Retention holes were slotted with diamond bur
to samples.

Then the samples were tested in tensile mode in a
universal testing machine at cross-head speed of 0.5 mm/min. The statistically
analysis of obtained data were performed with use one-way analysis of variance
test.

Results: The results showed that the highest bond strength value (92.54 N) was
identified in Group 3, the lowest bond strength value (31.56 N) in Group 4. The
result of one-way analysis of variance test showed that there were not
statistically significant differences between the groups. (p>0.05)

Conclusion: As a result of this study, the surface treatments were not affected on
bond strength of soft lining material to polyamide denture material.

Key
Words: Polyamide denture, soft lining materia 

YUMUŞAK
ASTAR MADDESİNİN POLİAMİD KAİDE MATERYALİNE BAĞLANMA DAYANIMI

Amaç: Bu çalışmanın amacı yumuşak astar maddesinin poliamid kaide maddesine
bağlanma dayanımının incelenmesidir.

Gereç ve
Yöntem: Çalışma kapsamında 25 adet poliamid kaide maddesi ve
bir yumuşak astar maddesi kullanıldı. Örnekler yüzey işlemlerine göre beş gruba
ayrıldı:

Grup 1 (Kontrol): Hiçbir yüzey işlemi uygulanmadı.

Grup 2: Örnekler 50 µm partikül boyutlu Al₂O₃
tozu ile kumlandı.

Grup 3: Örnekler elmas frezle aşındırıldı.

Grup 4: Örnekler % 37’lik ortofosforik asit ile
asitlendi.

Grup 5: Elmas bir frezle örneklere retansiyon olukları
açıldı.

Örnekler universal test cihazında 0.5 mm/min başlık
hızı ile test edildi. Verilerin istatistiksel analizi tek yönlü varyans analizi
testi ile yapıldı.

Bulgular: Sonuçlar en yüksek bağlanma dayanımı değerinin (92.54 N) 3. Grupta, en
düşük bağlanma dayanımı değerinin ise (31.56 N) 4. Grupta olduğunu gösterdi.
Tek yönlü varyans analizinin sonuçlarına göre gruplar arasındaki farkın
istatistiksel olarak anlamlı olmadığı görüldü (p>0.05).

Sonuçlar: Yüzey işlemlerinin yumuşak astar maddesi ile poliamid kaide maddesi
arasındaki bağlantı kuvvetini etkilemediği sonucuna varıldı.

Anahtar
Kelimeler: Poliamid kaide maddesi, yumuşak astar maddesi

Anahtar Kelimeler

Polyamide denture

Kaynakça

• 1. Marei MK. Reinforcement of denture base resin with glasscfiller. J Prosthodont 1999;8:18-26.
• 2. Stipho HD. Effect of glass fiber reinforcernent on some mechanicalcproperties of autopolymerizing polymethyl methacrylate.cJ Prosthet Dent 1998; 79: 580-4.
• 3. Jagger D, Harrison A, Jagger R, Milward P. The effect of thecaddition of poly (methyl methacrylate) fibres on some propertiescof high strength heat-cured acrylic resin denture basecmaterial. J Oral Rehabil 2003;30:231-5.
• 4. Jagger DC, Harrison A, Jandt KD. The reinforcement ofcdentures. J Oral Rehabil 1999;26:185-94.
• 5. Dogan OM, Bolayır G, Keskin S, Doğan A, Bek B, Boztuğ A. The effect of esthetic fibers on impact resistance of a conventional heat-cured denture base resin. Dent Mater J 2007; 26:232-9.
• 6. Nakamura M, Takahashi H, Hayakawa I. Reinforcement of denture base resin with short-rod glass fiber. Dent Mater J 2007;26:733-8.
• 7. Uçar Y, Akova T, Aysan I. Mechanical properties of polyamide versus different PMMA denture base materials. J Prosthodont 2012;21:173-6.
• 8. Phoenix RD, Mansueto MA, Ackerman NA, Jones RE Evaluation of mechanical and thermal properties of commonly used denture base resins. J Prosthodont 2004;13:17- 27.
• 9. Yunus N, Rashid AA, Azmi LL, Abu-Hassan MI. Some flexural properties of a nylon denture base polymer. J Oral Rehabil 2005;32:65-71.
• 10. Bolayır G, Turgut M, Hubbezoğluİ, Doğan OM, Keskin S, Doğan A, Bek B. Evaluation of laser treatment on relinebase composites. J Adhesion 2007;83:117-27.
• 11. Sertgöz A, Kulak Y, Gedik H, Taskonak B. The effect of thermocycling on peel strength of six soft lining materials. J Oral Rehabil 2002;29:583-7.
• 12. Hatamleh MM, Watts DC. Bonding of maxillofacial silicone elastomers to an acrylic substrate. Dent Mater 2010;26:387- 95.
• 13. Sertgöz A, Kulak Y, Gedik H, Taskonak B. The effect of thermocycling on peel strength of six soft lining materials. J Oral Rehabil 2002;29:583-7
• 14. Usumez A, Inan O, Aykent F. Bond strength of a silicone lining material to alumina-abraded and lased denture resin. J Biomed Mater Res B Appl Biomater 2004;71:196-200.
• 15. Jacobsen NL, Mitchell DL, Johnson DL, Holt RA. Lased and sandblasted denture base surface preparations affecting resilient liner bonding. J Prosthet Dent 1997;78:153-8
• 16. Uzun G, Keyf F. Aşırı rezorbe krete sahip geriatrik bir hastaya yumuşak astar maddesi uygulaması. Atatürk Univ. Diş Hek. Fak. Derg 2012;22:191-196
• 17. Kawano F, Ohguri T, Koran III A, Matsumoto N, Ichikawa T. Influence of lining design of three processed soft denture liners on cushioning effect. J Oral Rehabil 1999;26:962-8
• 18. Pinto JR, Mesquita MF, Henriques GE, de ArrudaNóbilo MA. Effect of thermocycling on bond strength and elasticity of 4 long-term soft denture liners. J Prosthet Dent 2002;88: 516-21
• 19. Aydin AK, Terzioğlu H, Akinay AE, Ulubayram K, Hasirci N. Bond strength and failure analysis of lining materials to denture resin. Dent Mater 1999;15:211-8.
• 20. McCabe JF, Carrick TE, Kamohara H. Adhesive bond strength and compliance for denture soft lining materials. Biomaterials 2002;23:1347-52
• 21. Sarac D, Sarac YS, Basoglu T, Yapici O, Yuzbasioglu E. The evaluation of microleakage and bond strength of a siliconebased resilient liner following denture base surface pretreatment. J Prosthet Dent 2006;95:143-51.
• 22. Pisani MX, Silva-Lovato CH, Malheiros-Segundo Ade L, Macedo AP, Paranhos HF. Bond strength and degree of infiltration between acrylic resin denture liner after immersion in effervescent denture cleanser. J Prosthodont 2009;18:123-9.
• 23. Al-Athel M, Jagger R, Jagger D. Effect of ageing on the bond strength of a permanent denture soft lining material. J Oral Rehabil 2002;29:992-6.
• 24. Tanimoto Y, Saeki H, Kimoto S, Nishiwaki T, Nishiyama N. Evaluation of adhesive properties of three resilient denture liners by the modified peel test method. Acta Biomater 2009; 5:764-9.
• 25. Waters MG, Jagger RG. Mechanical properties of an experimental denture soft lining material. J Dent 1999;27:197-202.
• 26. Tugut F, Akin H, Mutaf B, Akin GE, Ozdemir AK. Strength of the bond between a silicone lining material and denture resin after Er:YAG laser treatments with different pulse durations and levels of energy. Lasers Med Sci 2012;27:281-5.
• 27. Baysan A, Parker S, Wright PS. Adhesion and tear energy of a long-term soft lining material activated by rapid microwave energy. J Prosthet Dent 1998;79:182-7.
• 28. Braden M, Wright PS, Parker S. Soft lining materials-a review. Eur J Prosthodont Restor Dent 1995;3:163-74.
• 29. Kulak-Ozkan Y, Sertgoz A, Gedik H. Effect of thermocycling on tensile bond strength of six silicone-based, resilient denture liners. J Prosthet Dent. 2003;89:303-10.
• 30- Pinto JR, Mesquita MF, Nóbilo MA, Henriques GE. Evaluation of varying amounts of thermal cycling on bond strength and permanent deformation of two resilient denture liners. J Prosthet Dent. 2004;92:288-93.
• 31. Craig RG. Restorative dental materials, 7th ed, CV Mosby Co, St. Louis, 1986, pp.496-498.
• 32. Sauve JL. Clinical evaluation of silastic 390 as a lining material for dentures. J Prosthet Dent 1966; 16: 650- 60.
• 33. Kawano F, Dootz ER, Koran A, Craig RG. Sorption and solubility of 12 soft denture liners. J Prosthet Dent 1994; 72: 393-398.
• 34. Waters MG, Jagger RG, Winter RW. Water absorption of（RTV）silicone denture soft lining material. J Dent 1996; 24: 105-108.
• 35. Emmer TJ Jr, Emer TJ Sr, Vaidynathan J, Vaidynathan TK. Bond strength of permanent soft denture liners bonded to the denture base. J Prosthet Dent 1995; 74: 595-601.
• 36. Kawano F, Dootz ER, Koran A. Comparison of bond strength of six soft denture liners to denture base resin. J Prosthet Dent 1992; 68: 368-371.
• 37. Wilson HJ, Tomlin HR. Soft lining materials: some relevant properties and their determination. J Prosthet Dent 1969; 21: 244-250.
• 38. Akin H, Tugut F, Mutaf B, Akin G, Ozdemir AK. Effect of different surface treatments on tensile bond strength of silicone-based soft denture liner. Lasers Med Sci 2011;26:783-8.
• 39. Gundogdu M, Yesil Duymus Z, Alkurt M. Effect of surface treatments on the bond strength of soft denture lining materials to an acrylic resin denture base J Prosthet Dent. 2014 Oct;112(4):964-71
• 40. Korkmaz FM1, Bagis B, Ozcan M, Durkan R, Turgut S, Ates SM. Peel strength of denture liner to PMMA and polyamide: laser versus air-abrasion. J Adv Prosthodont. 2013 Aug;5(3):287-95