THE EVALUATION OF BOND STRENGTH BETWEEN DENTAL CERAMIC AND BASE METAL ALLOYS FABRICATED BY CASTING AND LASER SINTERING

Yıl 2019, Cilt: 29 Sayı: 3, 455 - 460, 16.07.2019

Yurdanur Uçar Elif Figen Koçak Orhun Ekren

https://doi.org/10.17567/ataunidfd.471522

Öz

Amaç: Bu
çalışmanın amacı lazer sinterize
Co-Cr ve döküm yöntemi ile elde edilen Ni-Cr ve Co-Cr alaşımlarının porselen
ile bağlantısını 3-nokta-bükme testi (3-Point-Bending; 3PB) kullanarak
değerlendirmektir.

Gereç-Yöntem: Çalışmada metal altyapı olarak 3 farklı grup kullanılmıştır: lazer
sinterize Co-Cr, döküm Co-Cr ve döküm Ni-Cr. Her grup için 15 örnek ISO
9693(1999) standartlarına uygun olarak hazırlanmış ve 3PB testi kullanılarak
bağlanma dayanımı değerlendirilmiştir. Veriler ANOVA ve  sonrasında Tukey çok yönlü karşılaştırma testi
kullanılarak değerlendirilmiştir (α=0,05).

Bulgular: Bükülme modülü
ve ortalama en yüksek bükme dayanımı değerleri karşılaştırıldığında her iki
parametre için 3 grup arasında istatistiksel fark bulunmuştur (P=0,0001). En
düşük ortalama bükülme modülü lazer sinterize grupta gözlenirken (77±6,5 GPa),
en yüksek değer döküm Co-Cr grubunda (247±16 GPa) görülmüştür. İkili karşılaştırmalarda
her 3 grup da birbirinden farklı bulunmuştur. Ortalama bükülme dayanımı
değerleri karşılaştırıldığında ise en yüksek dayanım değeri lazer sinterize
Co-Cr (87±9 MPa) grubunda bulunurken, döküm Co-Cr grubunun bükülme dayanımı (78±13
MPa) daha düşük olmakla birlikte aradaki farkın istatistiksel açıdan anlamlı
olmadığı görülmüştür (P=0,094). Ancak döküm Ni-Cr grubunun ortalama bükülme
dayanımı değeri (45±11 MPa) Co-Cr gruplarından anlamlı şekilde daha düşük
bulunmuştur (P=0,0001).

Sonuç: Bu çalışmanın
sınırları dâhilinde lazer sinterize Co-Cr altyapılarının porselen ile güçlü bir
bağlantı oluşturduğu sonucuna varılmıştır.

Anahtar
kelimeler: Hızlı Üretim, CAD/CAM, Lazer Sinterleme, Döküm, Bağlanma Dayanımı

THE EVALUATION OF BOND
STRENGTH BETWEEN DENTAL CERAMIC AND BASE METAL ALLOYS FABRICATED BY CASTING AND
LASER SINTERING

Abstract

Aim: The aim
of this study was to evaluate bond strength of laser sintered Co-Cr and cast
Co-Cr and Ni-Cr alloys to porcelain using 3-point-bending test (3PB test).

Material and Methods: 3 different metal frameworks were used in the current study: laser
sintered Co-Cr, cast Co-Cr and cast Ni-Cr. Fifteen specimens per group were
prepared according to ISO 9693 standard (1999) and tested using 3PB test.
Results were analyzed using one-way ANOVA followed by Tukey multiple comparison
test (α=0,05).

Results: Mean
bending modulus and flexural bending strength were statistically significantly
different among 3 groups (P=0,0001). The lowest mean bending modulus was observed
for laser sintered Co-Cr group (77±6,5 GPa) and the highest value was observed
for cast Co-Cr group (247±16 GPa). Pairwise comparisons have shown
statistically significant differences between all compared groups. When mean
bending strength values were compared, the highest value was observed for laser
sintered Co-Cr group (87±9 MPa). Although mean flexural strength value of cast
Co-Cr group (78±13 MPa) was lower than the laser sintered one, the difference
was not statistically significant (P=0,094). However, the mean bending strength
of cast Ni-Cr (45±11 MPa) was significantly lower than the Co-Cr groups (P=0,0001).

Conclusion: Within the limitations of this study, it can be concluded that laser
sintered Co-Cr frameworks establish a strong bond with porcelain.  

Key Words: Rapid manufacturing, CAD/CAM, Laser
Sintering, Casting, Bond Strength  

Anahtar Kelimeler

Hızlı Üretim, CAD/CAM, Lazer Sinterleme, Döküm

Kaynakça

• 1. Naylor PW. Introductıon to metal-ceramic technology, 3 rd ed. Berlin; Quintessence publishing Co Inc; 2017. p. 109.
• 2. White SN, Ho L, Caputo AA, Goo E. Strength of porcelain fused to titanium beams. J Prosthet Dent. 1996;75:640-8.
• 3. O’Brien WJ. Dental Materials and Their Selection. 4th ed. Chicago; Quintessence Publishing Co Inc; 2008; p. 531.
• 4. Anusavice KJ, Shen C, Rawls RH. Phillips’ science of dental materials. 12th ed. St Louis; Elsevier Inc. Saunders; 2013. p. 418-73.
• 5. Ucar Y, Aksahin Z, Kurtoglu C. Metal ceramic bond after multiple castings of base metal alloy. J Prosthet Dent. 2009;102:165-71.
• 6. Naylor PW. Introductıon to metal-ceramic technology, 3 rd ed. Berlin; Quintessence publishing Co Inc; 2017. p. 18.
• 7. Ekren O, Ozkomur A, Ucar Y. Effect of layered manufacturing techniques, alloy powders, and layer thickness on metal-ceramic bond strength. J Prosthet Dent. 2018;119:481-7.
• 8. Uçar Y, Aysan Meriç I, Ekren O, Layered Manufacturing of Dental Ceramics: Fracture Mechanics, Microstructure, and Elemental Composition of Lithography-Sintered Ceramic. J Prosthodont. 2018 Feb 11. doi: 10.1111/jopr.12748
• 9. Koutsoukis T, Zinelis S, Eliades G, Al-Wazzan K, Rifaiy MA, Al Jabbari YS. Selective Laser Melting Technique of Co-Cr Dental Alloys: A Review of Structure and Properties and Comparative Analysis with Other Available Techniques. J Prosthodont. 2015;24:303-12.
• 10. Yıldırım MP, Bayındır F. Protetik diş tedavisinde hızlı prototip üretim teknolojileri Atatürk Üniv. Diş Hek. Fak. Derg 2013;25:430-35
• 11. Mazzoli A. Selective laser sintering in biomedical engineering. Med Biol Eng Comput. 2013;51:245-56.
• 12. Ren XW, Zeng L, Wei ZM, Xin XZ, Wei B. Effects of multiple firings on metal-ceramic bond strength of Co-Cr alloy fabricated by selective laser melting. J Prosthet Dent. 2016;115:109-14.
• 13. Nesse H, Ulstein DM, Vaage MM, Øilo M. Internal and marginal fit of cobalt-chromium fixed dental prostheses fabricated with 3 different techniques. J Prosthet Dent. 2015;114:686-92.
• 14. Naylor PW. Introductıon to metal-ceramic technology, 3 rd ed. Berlin; Quintessence publishing Co Inc; 2017. P. 53.
• 15. Bae EJ, Kim JH, Kim WC, Kim HY. Bond and fracture strength of metal-ceramic restorations formed by selective laser sintering. J Adv Prosthodont. 2014;6:266-71.
• 16. Li J, Chen C, Liao J, Liu L, Ye X, Lin S, Ye J. Bond strengths of porcelain to cobalt-chromium alloys made by casting, milling, and selective laser melting. J Prosthet Dent 2017;118:69-75.
• 17. Dimitriadis K, Spyropoulos K, Papadopoulos T. Metal-ceramic bond strength between a feldspathic porcelain and a Co-Cr alloy fabricated with Direct Metal Laser Sintering technique. J Adv Prosthodont 2018;10:25-31.
• 18. Kaleli N,Sarac D. Comparison of porcelain bond strength of different metal frameworks prepared by using conventional and recently introduced fabrication methods. J Prosthet Dent 2017;118:76-82.
• 19. Akova T, Ucar Y, Tukay A, Balkaya MC, Brantley WA. Comparison of the bond strength of laser-sintered and cast base metal dental alloys to porcelain. Dent Mater 2008;24:1400-4.
• 20. HammadIA,TalıcYF. Designs of bond strength tests for metalceramic complexes: review of the literature. J Prosthet Dent. 1996;75:602-8.