ÜÇ FARKLI NİKEL-TİTANYUM DÖNER ALET SİSTEMİNİN VÜCUT ISISINDAKİ DÖNGÜSEL YORGUNLUK DİRENÇLERİNİN KARŞILAŞTIRMALI OLARAK DEĞERLENDİRİLMESİ

Yıl 2022, Cilt: 32 Sayı: 1, 49 - 52, 15.02.2022

Z Öztürk S Ersahan Y Erdem Hepsenoglu D Ekiz C Topkara

https://doi.org/10.17567/ataunidfd.1009686

Öz

Amaç: Bu çalışmanın amacı, üç farklı nikel-titanyum (Ni-Ti) döner eğe sisteminin vücut ısısındaki döngüsel yorgunluk dirençlerinin karşılaştırılmalı olarak değerlendirilmesidir.
Mateyal-Metod: Bu çalışmada, üç farklı Ni-Ti döner eğe sisteminden (ProTaper Universal-PU, Twisted File-TF, One Curve-OC) toplam 90 adet kanal eğesi kullanıldı. Tüm eğe grupları kanal içi sıcaklığında (35 °C), 60° eğime sahip suni kanallarda döngüsel yorgunluk direnci açısından test edildi. Sıcaklık, deney boyunca bir su altı termometresi ve bir termostat ile kontrol edildi. Kırılıncaya kadar geçen süre ve tur sayısı hesaplandı. Elde edilen sonuçlar istatistiksel olarak SPSS 23.0 paket programı ile analiz edildi.
Bulgular: Eğe tipleri içerisinde, en yüksek döngüsel yorgunluk direnci OC eğelerinde (1072,327 158,272), en düşük direnç de PU eğelerinde (439,798 129,942) görüldü.
Sonuç: Bu sonuçlara göre, eğimli kanallarda döngüsel yorgunluk direncinin daha yüksek olması ve kırık kısmın uzunluğunun daha fazla olması gibi avantajları sayesinde One Curve eğe sisteminin kullanımı daha avantajlı olabilir.
Anahtar kelimeler: ProTaper Universal, Twisted File, One Curve, döngüsel yorgunluk direnci

Comparative Evaluation of Cyclic Fatique Resistance of Three Different Nickel-Titanium Rotary Instruments at body temperature
Abstract
Aim: The aim of this study is to comparatively investigate the cyclic fatigue of three different nickel-titanium (Ni-Ti) rotary files at body temperature.
Materials and Methods: A total of 90 Ni-Ti rotary instruments from 3 brands (ProTaper Universal-PU, Twisted File-TF, One Curve-OC) were selected. At intracanal temperature (35°C), all groups of files were tested for cyclic fatique resistance in artificial root canals with 60° curvature at body temperature. The time until fracture was recorded and the number of cycles were calculated for each group. The results were analyzed by statistically.
Results: Among the file types, OC files (1072,327 158,272) were the most resistance to cyclic fatigue and PU files (439,798 129,942) had the lowest results.
Conclusion: According to these results, the use of the One Curve file system may be advantageous due to its advantages such as higher cyclic fatigue resistance in curved canals and longer fracture length.
Key words: ProTaper Universal, Twisted File, One Curve, cyclic fatique resistance

Anahtar Kelimeler

ProTaper Universal, Twisted File, One Curve, döngüsel yorgunluk direnci

Kaynakça

• 1. Guelzow A, Stamm O, Martus P, Kielbassa AM. Comparative study of six rotary nickel-titanium systems and hand instrumentation for root canal preparation. Int Endod J 2005;38:743–52.
• 2. Liu SB, Fan B, Cheung GS, Peng B, Fan MW, Gutmann JL, Song YL, Fu Q, Bian Z. Cleaning effectiveness and shaping ability of rotary ProTaper compared with rotary GT and manual K-Flexofile. Am J Dent 2006;19353–8.
• 3. McGuigan MB, Louca C, Duncan HF. The impact of fractured endodontic instruments on treatment outcome. Br Dent J 2013;214:285–9.
• 4. Peters OA, de Azevedo Bahia MG, Pereira ES. Contemporary root canal preparation: innovations in biomechanics. Dent Clin North Am 2017;61:37–58.
• 5. Kaul R, Farooq R, Kaul V, Khateeb SU, Purra AR, Mahajan R. Comparative Evaluation of Physical Surface Changes and Incidence of Separation in Rotary Nickel-Titanium Instruments: An in Vitro SEM Study. Iran Endod J 2014;9:204-9.
• 6. Choi J, Oh S, Kim YC, Jee KK, Kum K, Chang S. Fracture resistance of K3 nickel-titanium files made from different thermal treatments. Bioinorg Chem App 2016;2016: 6374721.
• 7. Gambarini G, Gerosa R, De Luca M, Garala M, Testarelli L. Mechanical properties of a new and improved nickel-titanium alloy for endodontic use: an evaluation of file flexibility. Oral Surg Oral Med Oral Pathol Oral Radiol Endod 2008;105:798-800.
• 8. Cheung GS, Peng B, Bian Z, Shen Y, Darvell BW. Defects in ProTaper S1 instruments after clinical use: fractographic examination. Int Endod J 2005;38:802-9.
• 9. Özyürek T, Özerol NB. Comparison of cyclic fatigue resistance of Revo-S and G-Star NiTi Files. J Appl Dent Med Sci 2016;15:112- 4.
• 10. Özyürek T. Cyclic fatigue resistance of Reciproc, WaveOne, and WaveOne Gold nickel-titanium instruments. J Endod 2016;42:1536-9.
• 11. Gündoğar M, Özyürek T. Cyclic fatigue resistance of OneCurve, HyFlex EDM, Wave One gold, and Reciproc blue nickel‐titanium instruments. J Endod 2017;43:1192-6.
• 12. Gundoğar M. HyFlex EDM, RC Gold ve G-Star Nikel Titanyum Eğelerinin Döngüsel Yorgunluğa Karşı Dirençlerinin Karşılaştırılması. Turkiye Klinikleri J Dental Sci 2020;26:21-5.
• 13. Grande NM, Plotino G, Pecci R, Bedini R, Malagnino VA, Somma F. Cyclic fatigue resistance and three-dimensional analysis of instruments from two nickel-titanium rotary systems. Int Endod J 2006;39:755-63.
• 14. Plotino G, Costanzo A, Grande NM, Petrovic R, Testarelli L, Gambarini G. Experimental evaluation on the influence of autoclave sterilization on the cyclic fatigue of new nickel-titanium rotary instruments. J Endod 2012;38:222-5.
• 15. Martín, B, Zelada G, Varela P, Bahillo JG, Magan F, Ahn S, Rodriguez C. Factors influencing the fracture of nickel-titanium rotary instruments. Int Endod J 2003;36:262-6.
• 16. Gambarini, G. Cyclic fatigue of nickel-titanium rotary instruments after clinical use with low- and high-torque endodontic motors. J Endod 2001;27:772-4.
• 17. Parashos P, Messer HH. Rotary NiTi instrument fracture and its consequences. J Endod 2006;32:1031-43.
• 18. Gabel WP, Hoen M, Steiman HR, Pink FE, Dietz R. Effect of rotational speed on nickel-titanium file distortion. J Endod 1999; 25:752-4.
• 19. Lopes H, Ferreira A, Elias C, Moreira E, Machado De Oliviera J, Siqueira J. Influence of rotational speed on the cyclic fatigue of rotary nickel-titanium endodontic instruments. J Endod 2009;35:1013-6.
• 20. Grande NM, Plotino G, Silla E, Pedullà E, DeDeus G, Gambarini G, Somma, F. Environmental temperature drastically affects flexural fatigue resistance of nickel-titanium rotary files. J Endod 2017;43:1157–60.
• 21. Plotino G, Grande NM, Bellido MM, Testarelli L, Gambarini G. Influence of temperature on cyclic fatigue resistance of ProTaper gold and ProTaper universal rotary files. J Endod 2017;43:200–2.
• 22. Yılmaz K, Uslu G, Gündogar M, Özyürek T, Grande NM, Plotino G. Cyclic fatigue resistances of several nickel–titanium glide path rotary and reciprocating instruments at body temperature. Int Endod J 2018;51:924–30.
• 23. de Vasconcelos RA, Murphy S, Carvalho CAT, Govindjee RG, Govindjee S, Peters OA. Evidence for reduced fatigue resistance of contemporary rotary instruments exposed to body temperature. J Endod 2016;42:782-7.
• 24. de Hemptinne F, Slaus G, Vandendael M, Jacquet W, de Moor RJ, Bottenberg P. In vivo intracanal temperature evolution during endodontic treatment after the injection of room temperature or preheated sodium hypochlorite. J Endod 2015;41:1112–5.
• 25. Ha JH, Kim SK, Cohenca N, Kim HC. Effect of R-phase heat treatment on torsional resistance and cyclic fatigue fracture. J Endod 2013;39:389– 93.
• 26. Rodrigues R, Lopes H, Elias C, Amaral G, Vieria V, De Mar-tin A. Influence of different manufacturing methods on the cyclic fatigue of rotary nickel-titanium endodontic instruments. J Endod 2011;37:1153-7.
• 27. Yaşar Ş, Erşahan Ş, Aydın C. Evaluation of 2 nickel-titanium instrument systems in shaping root canals. Ata Uni Diş Hek Fak Derg 2019;29(3):400-6.
• 28. Uslu G, Özyürek T, Gündoğar M, Yılmaz K. Cyclic fatigue resistance of 2Shape, Twisted File and EndoSequence Xpress nickel-titanium rotary files at intracanal temperature. J Dent Res Dent Clin Dent Prospects. 2018;12:283-7.
• 29. Elnaghy A. Cyclic fatigue resistance of ProTaper Next nickel‐titanium rotary files. Int Endod J 2014;47:1034-9.
• 30. Özyürek T, Yılmaz K. ProTaper Universal, ProTaper Next ve Extreme CM R3 nikel titanyum eğelerin döngüsel yorgunluğa karşı dirençlerinin karşılaştırılması. Turkiye Klinikleri J Dental Sci 2016;22:190-4.
• 31. Topçuoğlu HS, Topçuoğlu G, Kafdağ O, Balkaya H. Effect of two different temperatures on resistance to cyclic fatigue of One Curve, EdgeFile, HyFlex CM and ProTaper Next files. Aust Endod J 2020;46:68–72.
• 32. Plotino G, Testarelli L, Al-Sudani D, Pongione G, Grande NM, Gambarini G. Fatigue resistance of rotary instruments manufactured using different nickel-titanium alloys: a comparative study. Odontol 2014;102:31–5.
• 33. Yılmaz K, Özyürek T, Uslu G. Comparison of cyclic fatigue resistance of One Curve, Hyflex Edm, Waveone Gold and Reciproc Blue nickel-titanium rotary files at intra-canal temperature. Cumhuriyet Dent J 2019;22:42-7.
• 34. Micoogullari Kurt S, Kaval ME, Serefoglu B, Kandemir Demirci G, Çalıskan MK. Cyclic fatigue resistance and energy dispersive X-ray spectroscopy analysis of novel heat-treated nickel–titanium instruments at body temperature. Microsc Res Tech 2020;1–5.
• 35. Silva EJNL, Martins JNR, Lima CO, Vieira VTL, Fernandes FMB, De-Deus G, Versiani MA. Mechanical tests, metallurgical characterization and shaping ability of Niti rotary instruments: A multimethod research. J Endod 2020;46:1485-94.
• 36. Karataşlıoğlu E, Aydın U, Yıldırım C. Cyclic fatigue resistance of novel rotary files manufactured from different thermal treated nickel–titanium wires in artificial canals. Niger J Clin Pract 2018;21:231-5.
• 37. Ertaş H, Capar ID, Arslan H. Cyclic fatigue resistance of ProTaper Universal, Twisted File Adaptive, Reciproc and WaveOne systems. Turk Endod J 2016;1:30-4.
• 38. Elnaghy AM, Elsaka SE. Cyclic fatigue resistance of one curve, 2Shape, ProFile vortex, vortex blue, and RaCe nickel-titanium rotary instruments in single and double curvature canals. J Endod 2018;44:1725–30
• 39. Abdulameer ZM, Hamed SA, Jehad RH, Al-Hashemi J. Cyclic fatigue resistance of Wave One Gold, F6 SkyTaper, One Curve, and AF Blue R3 NiTi rotary Systems. Indian J Med Forensic Med Toxicol 2020;14:2205-13.