With the widespread integration of renewable energy systems (RES) into the electric grid, maintaining power quality within specified limits has become a major focus. The total harmonic distortion (THD) value of the currents transferred to the grid and directly affecting power quality in (RES) such as grid-connected photovoltaic (PV) and fuel cells (FC) should not exceed 5%. To achieve this objective, various filter topologies are used to interface between the inverters, which are components of PV and FC systems, and the grid.Although there are numerous filter topologies, L and LCL-type passive filters are the most commonly used topologies in grid-connected systems. This study analyzes the L and LCL-type filter topologies for the H-bridge neutral point clamped (HNPC) inverter. The study’s modeling was carried out in the MATLAB/Simulink®. By comparing the simulation results, L and LCL filters’ harmonic attenuation capabilities, maximum power transferred to the grid, and effects on grid current have all been investigated.
HNPC inverter L and LCL filters power quality PV system sliding mode controller
Birincil Dil | İngilizce |
---|---|
Konular | Elektrik Mühendisliği (Diğer) |
Bölüm | Araştırma Makalesi |
Yazarlar | |
Yayımlanma Tarihi | 1 Mart 2024 |
Yayımlandığı Sayı | Yıl 2024 |
All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisans