Fault Detection from Horizontal Shaft Centrifugal Pump Fan Sound Analysis Using Artificial Intelligence

Öz

Axial misalignment, over-forced and wear of the components that constitute the machine is changed in the sound. It is of critical importance to implement early fault diagnosis and predictive maintenance planning in order to prevent errors caused by machines that break down or fail during operation. In this study, data comprising 15 one-dimensional sequences and 15 two-dimensional images from MFCCs (Mel-Frequency Cepstral Coefficients) for each sound were utilized in CNN (Convolutional Neural Networks). Furthermore, the data used in ML (Machine Learning) models were created by extracting 28 features from various audio characteristics such as amplitude-time, mel-spectrogram, MFCCs, ZCRs (Zero Crossing Rates), and RMS (Root Mean Square) energy. SVM (Support Vector Machine), KNN (K-Nearest Neighbours) and EL (Ensemble Learning), which combines SVM, KNN and RF (Random Forest) models, were utilized. The results indicated that the accuracy rates varied between 76.21% and 99.59%. The EL model exhibited the highest accuracy, correctly predicting all 99 sounds for faulty, 248 sounds out of 249 sounds for slightly faulty and 143 sounds out of 144 sounds for intact. The results indicate that it is possible to diagnose faults in centrifugal pumps and preventing errors. Consequently, economic savings will be achieved by reducing the losses caused by faulty parts and energy loss caused by the decrease in the efficiency of the system when it operates incorrectly will be prevented.

Anahtar Kelimeler

• Artificial Intelligence
• Classification models
• Centrifugal pump fan
• Early fault diagnosis
• Predictive maintenance

Teşekkür

IIC2024(Uluslararası Bilişim Kongresi-2024) kongresinde bu dergide yayınlanmak üzere bildirimizi seçtiklerinden dolayı teşekkür ederiz.

Kaynakça

1. [1] N. R. Sakthivel, V. Sugumaran andS. Babudevasenapati, “Vibration based fault diagnosis of monoblock centrifugal pump using decision tree”, Expert Systems with Applications, vol. 37(6), pp. 4040-4049, 2010. https://doi.org/10.1016/j.eswa.2009.10.002
2. [2] Y. Zhang, S. Hu, Y. Zhang, and L. Chen, Optimization and Analysis of Centrifugal Pump considering Fluid‐Structure Interaction. The scientific world journal, 2014(1), 131802, 2014. https://doi.org/10.1155/2014/131802
3. [3] J. Singh, and A. W. Review on fluid forces and their action on centrifugal pump impeller. International Journal on Interactive Design and Manufacturing (IJIDeM), 1-21, 2024. https://doi.org/10.1007/s12008-024-02109-1
4. [4] C. S. Kallesoe, V. Cocquempot, and R. Izadi-Zamanabadi, Model based fault detection in a centrifugal pump application. IEEE transactions on control systems technology, 14(2), 204-215, 2006. 10.1109/TCST.2005.860524
5. [5] H. K. Sakran, M. S. Abdul Aziz, M. Z. Abdullah, and C. Y. Khor, Effects of blade number on the centrifugal pump performance: a review. Arabian Journal for Science and Engineering, 47(7), 7945-7961, 2022. https://doi.org/10.1007/s13369-021-06545-z
6. [6] M. Vila-Forteza, A. Jimenez-Cortadi, A. Diez-Olivan, D. Seneviratne and D. Galar-Pascual, “Advanced Prognostics for a Centrifugal Fan and Multistage Centrifugal Pump Using a Hybrid Model”, In International Conference on Maintenance, Condition Monitoring and Diagnostics (pp. 153-165), Singapore, Springer Nature Singapore, 2021. https://doi.org/10.1007/978-981-99-1988-8_12
7. [7] M. Tan, Y. Lu, X. Wu, H. Liu, and X. Tian, Investigation on performance of a centrifugal pump with multi-malfunction. Journal of Low Frequency Noise, Vibration and Active Control, 40(2), 740-752, 2021. https://doi.org/10.1177/1461348420942349
8. [8] A. Kumar and R. Kumar, “Time-frequency analysis and support vector machine in automatic detection of defect from vibration signal of centrifugal pump”, Measurement, 108, 119-133, 2017. https://doi.org/10.1016/j.measurement.2017.04.041

9. [9] K. McKee, G. Forbes, M. I. Mazhar, R. Entwistle and I. Howard, “A review of major centrifugal pump failure modes with application to the water supply and sewerage industries”, In ICOMS Asset Management Conference Proceedings, Asset Management Council, 2011. http://hdl.handle.net/20.500.11937/28560
10. [10] D. Mourtzis J. Angelopoulos and N. Panopoulos, “Intelligent predictive maintenance and remote monitoring framework for industrial equipment based on mixed reality”, Frontiers in Mechanical Engineering, 6, 578379, 2020. https://doi.org/10.3389/fmech.2020.578379
11. [11] H. Ersoy and L. Özdemır, “Iklimlendirme Sistemlerine Ait Performans Tespitlerinin Akustik Analizlere Göre Yapilmasi”, Engineer & the Machinery Magazine, 52(623), 50-59, 2011. f3806045ee01987_ek.pdf
12. [12] R. S. Peres, A. D. Rocha, P. Leitao, and J. Barata, IDARTS–Towards intelligent data analysis and real-time supervision for industry 4.0. Computers in industry, 101, 138-146, 2018. https://doi.org/10.1016/j.compind.2018.07.004
13. [13] E. Sezer, D.Romero, F. Guedea, M. Macchi, and C. Emmanouilidis, An industry 4.0-enabled low cost predictive maintenance approach for smes. In 2018 IEEE International Conference on Engineering, Technology and Innovation (ICE/ITMC), 1-8, 2018, IEEE. 10.1109/ICE.2018.8436307
14. [14] T. P. Carvalho, F. A. Soares, R. Vita, R. D. P. Francisco, J. P. Basto and S. G. Alcalá, “A systematic literature review of ML methods applied to predictive maintenance”, Computers & Industrial Engineering, 137, 106024, 2019.https://doi.org/10.1016/j.cie.2019.106024
15. [15] Z. Fan, X. Xu, R. Wang and H. Wang, Fan fault diagnosis based on lightweight multiscale multiattention feature fusion network. IEEE Transactions on Industrial Informatics, 18(7), 4542-4554, 2021. 10.1109/TII.2021.3121294
16. [16] C. S. A. Gong, H. C. Lee, Y. C. Chuang, T. H. Li, C. H. S. Su, L. H. Huang, C. H. Chang, “Design and implementation of acoustic sensing system for online early fault detection in industrial fans”, Journal of Sensors, 2018. DOI: https://doi.org/10.1155/2018/4105208
17. [17] E. Güler, A. G.M. T. Kakız, F. B Gunay, B. Şanal, T. Çavdar, “Kapalı Mekân Ortamında 1D-CNN Kullanarak Yapılan Doluluk Tespiti Sınıflandırması”, Karadeniz Fen Bilimleri Dergisi, 13(1), 60-71, 2023. https://doi.org/10.31466/kfbd.1162332
18. [18] V. TATAR, “Su pompa istasyonunda kestirimci bakım ve yönetim organizasyonu”, PhD Thesis, (Order No. 29171313). Sakarya Universitesi, Applied Science Institute, Sakarya, 2010. https://www.proquest.com/dissertations-theses/su-pompa-istasyonunda-kestirimci-bakım-ve-yönetim/docview/2689284998/se-2
19. [19] A. Kumar, P. Sathujoda and N. A. Bhalla, “Vibration signal analysis of a rotor-bearing system through wavelet transform and empirical mode decomposition”, In IOP Conference Series: Materials Science and Engineering, 1248(1), 012027, IOP Publishing, 2022. 10.1088/1757-899X/1248/1/012027/meta
20. [20] M. Romanssini, P. C. C. de Aguirre, L. Compassi-Severo and A. G. Girardi, “A review on vibration monitoring techniques for predictive maintenance of rotating machinery”, Eng, 4(3), 1797-1817, 2023. https://doi.org/10.3390/eng4030102
21. [21] M. Chen, U. Challita, W. Saad, C. Yin and M. Debbah M, “Artificial neural networks-based ML for wireless networks: A tutorial”, IEEE Communications Surveys & Tutorials, vol. 21(4), pp. 3039-3071, 2019. 10.1109/COMST.2019.2926625
22. [22] P. Probst, M. N. Wright and A. L. Boulesteix, “Hyperparameters and tuning strategies for random forest”, Wiley Interdisciplinary Reviews: data mining and knowledge discovery, vol. 9(3), pp. 1301, 2019. 10.1002/widm.1301
23. [23] K. V. Rani and S. J. Jawhar, “Lung lesion classification scheme using optimization techniques and hybrid (knn-svm) classifier”, IETE Journal of Research, 68 (2),1485-1499, 2022. https://doi.org/10.1080/03772063.2019.1654935
24. [24] O. O. Abayomi-Alli, R. Damaševičius, A. Qazi, M. Adedoyin-Olowe and S. Misra, “Data augmentation and deep learning methods in sound classification: A systematic review”. Electronics, 11(22), 3795, 2022.https://doi.org/10.3390/electronics11223795
25. [25] S. L. Ullo, S. K. Khare, V. Bajaj and G.R. Sinha, “Hybrid computerized method for environmental sound classification”, IEEE Access, 8, 124055-124065, 2020. 10.1109/ACCESS.2020.3006082
26. [26] J. Xie, K. Hu, M. Zhu, J. Yu and Q. Zhu, “Investigation of different CNN-based models for improved bird sound classification”, IEEE Access, vol. 7,pp. 175353-175361, 2019. 10.1109/ACCESS.2019.2957572
27. [27] W. K. Mutlag, S. K. Ali, Z. M. Aydam and B. H. Taher, “Feature extraction methods: a review”, In Journal of Physics: Conference Series, vol. 1591(1), pp. 012028, IOP Publishing, 2020. 10.1088/1742-6596/1591/1/012028/meta
28. [28] A. O. Salau and S. Jain, “Feature extraction: a survey of the types, techniques, applications”, In 2019 international conference on signal processing and communication (ICSC), pp. 158-164, IEEE, 2019.10.1109/ICSC45622.2019.8938371
29. [29] G. Sharma, K. Umapathy and S. Krishnan, “Trends in audio signal feature extraction methods”, Applied Acoustics, vol. 158, pp. 107020, 2020.https://doi.org/10.1016/j.apacoust.2019.107020
30. [30] S. Singh, S. Potala and A. R. Mohanty, “An improved method of detecting engine misfire by sound quality metrics of radiated sound”, Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 233(12), 3112-3124, 2019. https://doi.org/10.1177/0954407018818693
31. [31] E. Germen, M. Başaran and M. Fidan, “Sound based induction motor fault diagnosis using Kohonen self-organizing map”, Mechanical Systems and Signal Processing, vol. 46(1), pp. 45-58, 2014. https://doi.org/10.1016/j.ymssp.2013.12.002
32. [32] A. Abayomi-Alli, O. Abayomi-Alli, J. Vipperman, M. Odusami and S. Misra,“Multi-class classification of impulse and non-impulse sounds using deep convolutional neural network (DCNN)”,In Computational Science and Its Applications–ICCSA 2019: 19th International Conference, Saint Petersburg, Russia, Proceedings, Part V 19, 359-371, Springer International Publishing, 2019. https://doi.org/10.1007/978-3-030-24308-1_30
33. [33] J. Kim and J. Lee, “Statistical classification of vehicle interior sound through up sampling-based augmentation and correction using 1D CNN and LSTM”. IEEE Access, 10, 100615-100626, 2022. 10.1109/ACCESS.2022.3208148
34. [34] C. Honggang, X. Mingyue, F. Chenzhao, S. Renjie and L. Zhe, “Mechanical fault diagnosis of GIS based on MFCCs of sound signals”, In 2020 5th Asia Conference on Power and Electrical Engineering (ACPEE), 1487-1491, IEEE, 2020. 10.1109/ACPEE48638.2020.9136284
35. [35] J. Jakubowski and J. Jackowski, “Recognition of moving tracked and wheeled vehicles based on sound analysis and machine learning algorithms”, International Journal of Automotive and Mechanical Engineering, 18(1), 8478-8488, 2021. https://doi.org/10.15282/ijame.18.1.2021.07.0642
36. [36] E. Babaee, N. B. Anuar, A. W. Abdul Wahab, S. Shamshirband and A. T. Chronopoulos, “An overview of audio event detection methods from feature extraction to classification”, Applied Artificial Intelligence, 31(9-10), 661-714, 2017. https://doi.org/10.1080/08839514.2018.1430469
37. [37] P. Kathirvel, M. S. Manikandan, S. Senthilkumar and K. P. Soman, Noise robust zerocrossing rate computation for audio signal classification. In 3rd International Conference on Trendz in Information Sciences & Computing (TISC2011), 65-69, 2011, IEEE. 10.1109/TISC.2011.6169086
38. [38] A. Prashanth, S. L. Jayalakshmi and R. Vedhapriyavadhana, “A review of deep learning techniques in audio event recognition (AER) applications”. Multimedia Tools and Applications, 83(3), 8129-8143, 2024. https://doi.org/10.1007/s11042-023-15891-z
39. [39] B. Underwood and R. Tashakkori, “Detecting anomalies in honey bee hives using their audio recordings”, In SoutheastCon, 173-177, IEEE, 2022.10.1109/SoutheastCon48659.2022.9763931
40. [40] S. Kiranyaz, O. Avci, O. Abdeljaber, T. Ince, M. Gabbouj and D. J. Inman, “1D convolutional neural networks and applications: A survey”, Mechanical systems and signal processing, 151, 107398, 2021. https://doi.org/10.1016/j.ymssp.2020.107398
41. [41] S. Sharma and S. Sen, “One-dimensional convolutional neural network-based damage detection in structural joints”. Journal of Civil Structural Health Monitoring, 10(5), 1057-1072, 2020. https://doi.org/10.1007/s13349-020-00434-z
42. [42] H. Perez, J. H. Tah and A. Mosavi, “Deep learning for detecting building defects using convolutional neural networks”, Sensors, 19(16), 3556, 2019. https://doi.org/10.3390/s19163556
43. [43] X. Yang, Y. Ye, X. Li, R. Y. Lau, X. Zhang and X. Huang, “Hyperspectral image classification with deep learning models”. IEEE Transactions on Geoscience and Remote Sensing, 56(9), 5408-5423, 2018. 10.1109/TGRS.2018.2815613
44. [44] G. Guo, H. Wang, D. Bell, Y. Bi and K. Greer, “KNN model-based approach in classification”. In On The Move to Meaningful Internet Systems 2003: CoopIS, DOA, and ODBASE: OTM Confederated International Conferences, CoopIS, DOA, and ODBASE 2003, Catania, Sicily, Proceedings, 986-996, Springer Berlin Heidelberg, 2003. https://doi.org/10.1007/978-3-540-39964-3_62
45. [45] L. Xiong and Y. Yao, “Study on an adaptive thermal comfort model with K-nearest-neighbors (KNN) algorithm”, Building and Environment, 202, 108026, 2021. https://doi.org/10.1016/j.buildenv.2021.108026
46. [46] S. Jueyendah, M. Lezgy-Nazargah, H. Eskandari-Naddaf and S. A. Emamian, “Predicting the mechanical properties of cement mortar using the support vector machine approach”, Construction and Building Materials, 291, 123396, 2021. https://doi.org/10.1016/j.conbuildmat.2021.123396
47. [47] M. A. Chandra and S. S. Bedi, Survey on SVM and their application in image classification. International Journal of Information Technology, 13(5), 1-11, 2021
48. [48] ***, Heterogeneous Ensemble Learning (Hard voting/Soft voting), https://www.datajango.com/heterogeneous-ensemble-learning-hard-voting-soft-voting/
49. [49] O. Sagi and L. Rokach, “Ensemble Learning: A survey”. Wiley interdisciplinary reviews: data mining and knowledge discovery, 8(4), 1249, 2018. https://doi.org/10.1002/widm.1249
50. [50] A. M. Ibrahim, M. Alfonse and M. Aref, “A SYSTEMATIC REVIEW ON TEXT SUMMARIZATION OF MEDICAL RESEARCH ARTICLES”, International Journal of Intelligent Computing and Information Sciences, 23(2), 50-61, 2023. 10.21608/ijicis.2023.190004.1252
51. [51] L. Dong, Z. Chen, R. Hua, S. Hu and C. Fan, “Research on diagnosis method of centrifugal pump rotor faults based on IPSO-VMD and RVM”, Nuclear Engineering and Technology, 55(3), 827-838, 2023. https://doi.org/10.1016/j.net.2022.10.045
52. [52] X. Xiao, H. Chen, L. Dong, H. Liu, and C. Fan, “Research on Common Fault Diagnosis and Classification Method of Centrifugal Pump Based on ReliefF and SVM”, International Journal of Fluid Machinery and Systems, 15(2), 287-296, 2022. 10.5293/ijfms.2022.15.2.287
53. [53] N. S. Ranawat, P. K. Kankar and A. Miglani, “Fault diagnosis in centrifugal pump using support vector machine and artificial neural network”, J. Eng. Res. EMSME Spec., 99, 111, 2020. https://doi.org/10.36909/jer.EMSME.13881
54. [54] A. R. Al-Obaidi, “Experimental diagnostic of cavitation flow in the centrifugal pump under various impeller speeds based on acoustic analysis method”, Archives of Acoustics, 48(2), 159-170, 2023. 10.24425/aoa.2023.145234
55. [55] E. Ebrahimi and M. Javidan, “Vibration-based classification of centrifugal pumps using support vector machine and discrete wavelet transform”, Journal of Vibroengineering, 19(4), 2586-2597, 2017. https://doi.org/10.21595/jve.2017.18120
56. [56] M. Karagiovanidis, X. E. Pantazi, D. Papamichail and V. Fragos, “Early detection of cavitation in centrifugal pumps using low-cost vibration and sound sensors”, Agriculture, 13(8), 1544, 2023. https://doi.org/10.3390/agriculture13081544