Researches on Anti-reflection Coating (ARC) Methods Used in PV Systems
Öz
With the development
of PV systems’ technology over the years and the reduction of production costs,
PV systems are now being used for electricity generation. PV systems are listed
among the renewable energy sources as the only requirement is solar energy and electricity
generation is carried out without any fuel and waste. Solar cells used in PV
systems are adversely affected by extremes of temperature, shading, reflection,
and pollution. It is known that before sunrays reach the cell’s surface, some
of them disappears from the protective glass surface and are reflected back
from the cell through the glass surface. Anti-reflection coatings (ARC) are
used to reduce the energy loss and increase solar cell efficiency and output
power. SiO2 and MgF2 are the most commonly used solutions
among these coatings. It has been seen that the most efficient applications,
with anti-reflection coatings as single, double, triple and more layers, are in
triple layers applications. It has been observed that applications to the protective
glass surface have self-cleaning properties, and TiO2 and ZrO2
are frequently used for this. The reflectance index of the protective glass,
which is normally 1.51, can be reduced to 1.20 in silicone cells and 1.28 in
thin film surfaces with the AR coatings.
Anahtar Kelimeler
Kaynakça
- [1] C.D. Evans, D.T. Monteith, D.M Cooper, “Long-term increases in surface water dissolved organic carbon: observations, possible causes and environmental impacts”, Environmental Pollution, vol. 137, pp. 55-71, 2005.
- [2] B. Kumaragurubaran, S. Anandhi, “Reduction of reflection losses in solar cell using anti reflective coating”, 2014 International conference on computation of power, energy, information and communication ICCPEIC, 2014.
- [3] Fraunhofer Institue of Solar Energy Systems, 2015.
- [4] Dimmler and Wachter, 2007.
- [5] White paper for CIGS thin film solar cell technology, 2016.
- [6] K. Branker, MJM Pathak, JM Pearce, “A review of solar photovoltaic levelized cost of electricity”, Renew. Sustain. Energy, vol. 15, pp. 4470-4482, rev 2011.
- [7] M. Eckhart, M. El-Ashry, D. Hales, K. Hamilton, P. Rae, “Renewables 2017 Global Status Report”, p. 33, 2017.
- [8] D. Huh, J. Shin, M. Byun, S. Son, P. Jung, H. Choi, Y. Kim, H. Lee, “Analysis of long-term monitoring data of PV modüle with Siox-based anti-reflective patterned protective glass”, Solar energy materials and solar cells, vol. 170, pp. 33-38, 2017.
Ayrıntılar
Birincil Dil
İngilizce
Konular
Mühendislik
Bölüm
Araştırma Makalesi
Yazarlar
Nazmi Ekren
*
Türkiye
Yayımlanma Tarihi
15 Şubat 2018
Gönderilme Tarihi
18 Eylül 2017
Kabul Tarihi
9 Ocak 2018
Yayımlandığı Sayı
Yıl 2018 Cilt: 6 Sayı: 1
Cited By
LabVIEW Based a Software System: Quantitative Determination of Main Electronic Parameters for Schottky Junction Structures
Balkan Journal of Electrical and Computer Engineering
https://doi.org/10.17694/bajece.576303Removal of spoiling materials from solar panel surfaces by applying surface acoustic waves
Journal of Cleaner Production
https://doi.org/10.1016/j.jclepro.2020.119992Diamond-Like Carbon Film Deposited via Electrochemical Route for Antireflection Applications in Photovoltaic
Key Engineering Materials
https://doi.org/10.4028/p-2n46mmElectrical performance of GaAs/p-Si solar cells with double-layer anti-reflective coatings using 1D simulation
Next Research
https://doi.org/10.1016/j.nexres.2025.100750Materials and process engineering of antireflection coatings for enhancement of efficiency in silicon solar cells
Materials for Renewable and Sustainable Energy
https://doi.org/10.1007/s40243-025-00351-5