Characterization of Microstip Transmission Lines Using Fractional-order Circuit Model

Yıl 2018, , 266 - 270, 28.10.2018

Omer Aydin , Betül Samancı , İsmail Serdar Özoğuz

https://doi.org/10.17694/bajece.473637

Cited By: 3

Öz

5G communication technology is used in very demanding
applications, such as high-performance mobile devices, Internet of Things (IoT)
applications, and wearable devices. Therefore, unlike the previous technologies,
5G technology requires massive bandwidth, mainly   within
three key frequency ranges, Sub-1 GHz, 1-6 GHz, and above 6 GHz. However, these
challenges require more accurate and wide-band characterization of the circuits
designed for 5G systems. To be specific, the losses, which can be neglected at
lower frequencies, may substantially affect the performance of these circuits
in the high frequency bands. This requires a comprehensive understanding and
proper characterization of the loss mechanism within all frequency band of 5G. This
paper investigates the viability of using the most common and easily accessible
material FR-4 in circuits designed for 5G applications, and thus focuses on the
proper modeling of the microstrip lines built around FR-4. For this purpose, we
have used the fractional-order model of the lossy dielectric material, and
ended up with a more accurate and simple model which fits well within a wide
frequency range, from 1GHz to 16GHz.

Anahtar Kelimeler

Fractional-Order Calculus, 5G Communication Technology, 5G Communication Technology

Kaynakça

• A.S. Elwakil, “Fractional-Order Circuits and Systems: An Emerging Interdisciplinary Research Area”, IEEE Circuits and Systems Magazine, 10, 4, 2010, pp: 40-50.
• I. Petras, Y. Q. Chen “Fractional-Order Circuit Elements with Memory”, Proc. of the 13th International Carpathian Control Conference (ICCC), 2012, DOI: 10.1109/CarpathianCC.2012.6228706
• Y.F. Pu, X. Yuan, and B. Yu “Analog Circuit Implementation of Fractional-Order Memristor: Arbitrary-Order Lattice Scaling Fracmemristor”, IEEE Transactions on Circuits and Systems I: Regular Papers, 65, 9, 2018, pp: 2903-2916.
• Y. Shang, H. Yu, and W. Fei, "Design and Analysis of CMOS based Terahertz Integrated Circuits by Causal Fractional-order RLGC Transmission Line Model", IEEE JETCAS, vol.3, no.3, pp355-366, September 2013.
• C. Vastarouchas, C. Psychalinos, “Biomedical and Biological Applications of Fractional Order Circuits”, 2017 Panhellenic Conference on Electronics and Telecommunications.
• Y. Shang, W. Fei, and H. Yu, “A fractional-order RLGC model for terahertz transmission line,” in IEEE Int. Microw. Symp., Jun. 2013.
• E. Fendzi-Donfack, J P Nguenang, L. Nana, “Fractional analysis for nonlinear electrical transmission line and nonlinear Schroedinger equations with incomplete sub-equation”, The European Physical Journal Plus, 2018, 133: 32.
• S. Cho, K. R. Kim, B.-G. Park, and I.M. Kang, “Non-quasi-static modeling of silicon nanowire metal-oxide-semiconductor field-effect transistor and its model verification up to 1 THz,” Jpn. J. Appl. Phys., vol.49, p. 110206, Nov. 2010.
• M. J.Degerstrom, B.K. Gilbert, and E. S. Daniel, “Accurate resistance, inductance, capacitance, and conductance (RLGC) from uniform transmission line measurements,” IEEE Electrical Performance Electron. Packag., pp. 77–80, Oct. 2008.
• D.M.Pozar, Microwave engineering. John Wiley & Sons, 2009.
• Y. Zhang and D. Xue, “Modeling and simulating transmission lines using fractional calculus,” in Int. Conf. Wireless Commun., Network. Mobile Comput. (WiCOM), Sep. 2007, pp. 3115–3118.
• D. D. Pollock, Physical Properties of Materials for Engineers, 2nd ed. Boca Raton, FL: CRC Press, 1993, pp. 499–575.
• J. Zhang, J. L. Drewniak, D. J. Pommerenke, M. Y. Koledintseva, R. E. DuBroff, W. Cheng, Z. Yang, Q. B. Chen, and A. Orlandi, “Causal RLGC(f) models for transmission lines from measured S-parameters,” IEEE Trans. Electromagn. Compatibil., vol. 52, no. 1, pp. 189–198, Feb. 2010.