Araştırma Makalesi

Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator

Cilt: 7 Sayı: 2 30 Nisan 2019
PDF İndir
EN

Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator

Öz

The BLDC motors are widely used in industrial applications. The load characteristic and controller are important to obtain optimum performance in the speed control of the BLDC motor because some problems are occurred in speed control of nonlinear loads which is used the conventional control methods. The single link manipulator used in robotic applications is a nonlinear system for control algorithms. The load of motor is determined on considering the conversion ratio of the reducer box. In this study, a single link manipulator system consist of BLDC motor, reducer gearbox and robot arm is controlled by using NARMA-L2 controller as known modern control method in used the control of the nonlinear systems. The NARMA-L2 controller is based on neural network. The single link manipulator system is analyzed by using MATLAB/Simulink environment. The speed control of the BLDC motor is performed in conditions the constant and nonlinear load. The results show that the speed control of BLDC motor is performed the high performance in nonlinear loads.

Anahtar Kelimeler

Kaynakça

  1. R. Çelikel, M. Özdemir, and Ö. Aydoğmuş, “Implementation of a flywheel energy storage system for space applications,” Turkish J. Electr. Eng. Comput. Sci., Vol.25, 2017, pp. 1197–1210.
  2. J.Y.S. Luh, “Conventional Controller Design for Industrial Robots—A Tutorial,” IEEE Trans. Syst. Man Cybern., Vol.SMC-13, No. , 1983, pp.298–316.
  3. Wahyudi, S.S. Mokri, and A.A. Shafie, “Real time implementation of NARMA L2 feedback linearization and smoothed NARMA L2 controls of a single link manipulator,” Proc. Int. Conf. Comput. Commun. Eng. 2008, ICCCE08 Glob. Links Hum. Dev., pp.691–697, 2008.
  4. S.S. Mokri, H. Husain, W. Martono, A. Shafie, U.K.M. Bangi, and S. De, “Real Time Implementation of NARMA-L2 Control of a Single Link Manipulator Faculty of Engineering , Kulliyah of Engineering , International Islamic University of Malaysia , 50728 , Kuala Lumpur , Malaysia,” Am. J. Appl., Vol.5, No.12, 2008, pp. 1642–1649.
  5. O. Adetona, S. Sathananthan, and L.H. Keel, “Robust adaptive control of nonaffine nonlinear plants with small input signal changes,” IEEE Trans. Neural Networks, Vol.15, No.2, 2004, pp.408–416.
  6. M. George and K. Prasad Basu, “NARMA-L2 controlled variable frequency three-phase induction motor drive,” Eur. J. Sci. Res., Vol.70, No.1, 2012, pp. 98–111.
  7. T.D. Dongale, T.G. Kulkarni, S.R. Ghatage, and R.R. Mudholkar, “Implementation and Comparative study of Three Phase Induction Motor Control Using PID Controller , Fuzzy Logic and Neural Network Techniques,” International Journal of Science and Research, 2012, pp. 271–275.
  8. I. Iulia and A. Mihail, “Design of NARMA-L2 Neural controller for an Induction Motor ’ s Speed Control,” Journal of Computer Science & Control Systems, Vol.6, No.2, 2013, pp. 18–22.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Elektrik Mühendisliği

Bölüm

Araştırma Makalesi

Yazarlar

Yayımlanma Tarihi

30 Nisan 2019

Gönderilme Tarihi

8 Ocak 2019

Kabul Tarihi

18 Mart 2019

Yayımlandığı Sayı

Yıl 2019 Cilt: 7 Sayı: 2

Kaynak Göster

APA
Çelikel, R. (2019). Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator. Balkan Journal of Electrical and Computer Engineering, 7(2), 143-148. https://doi.org/10.17694/bajece.510170
AMA
1.Çelikel R. Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator. Balkan Journal of Electrical and Computer Engineering. 2019;7(2):143-148. doi:10.17694/bajece.510170
Chicago
Çelikel, Reşat. 2019. “Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator”. Balkan Journal of Electrical and Computer Engineering 7 (2): 143-48. https://doi.org/10.17694/bajece.510170.
EndNote
Çelikel R (01 Nisan 2019) Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator. Balkan Journal of Electrical and Computer Engineering 7 2 143–148.
IEEE
[1]R. Çelikel, “Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator”, Balkan Journal of Electrical and Computer Engineering, c. 7, sy 2, ss. 143–148, Nis. 2019, doi: 10.17694/bajece.510170.
ISNAD
Çelikel, Reşat. “Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator”. Balkan Journal of Electrical and Computer Engineering 7/2 (01 Nisan 2019): 143-148. https://doi.org/10.17694/bajece.510170.
JAMA
1.Çelikel R. Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator. Balkan Journal of Electrical and Computer Engineering. 2019;7:143–148.
MLA
Çelikel, Reşat. “Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator”. Balkan Journal of Electrical and Computer Engineering, c. 7, sy 2, Nisan 2019, ss. 143-8, doi:10.17694/bajece.510170.
Vancouver
1.Reşat Çelikel. Speed Control of BLDC Using NARMA-L2 Controller in Single Link Manipulator. Balkan Journal of Electrical and Computer Engineering. 01 Nisan 2019;7(2):143-8. doi:10.17694/bajece.510170

Cited By

All articles published by BAJECE are licensed under the Creative Commons Attribution 4.0 International License. This permits anyone to copy, redistribute, remix, transmit and adapt the work provided the original work and source is appropriately cited.Creative Commons Lisans