Contactless Detection of Electrical Machine Bearing Faults: A Radar-Based Solution

Öz

Bearing failures represent the most prevalent fault type in electrical machines, potentially leading to catastrophic consequences if not detected early. Conventional detection methods primarily rely on thermal, acoustic, and vibration sensors. Traditional vibration-based techniques have gained widespread adoption due to their stable and straightforward signal-processing capabilities. However, these approaches require direct motor mounting, introducing economic, temporal, and safety inefficiencies. This study presents the first investigation of contactless radar-based detection of bearing faults according to the authors' knowledge. The research employs the absolute value of complex signals derived from quadrature signals recorded by a 24 GHz radar transceiver as the vibration signal. Various defects like corrosion, improper oil levels, and scratches were deliberately introduced to the inner race, outer race, and balls of bearings, establishing 16 distinct fault classes. Classification performance was evaluated using both time-domain statistical features and frequency-domain PSD features. Multiple machine learning algorithms were applied to both approaches, consistently achieving accuracy rates exceeding 98%. This study validates the potential of radar-based systems for bearing fault diagnosis and introduces a novel paradigm for contactless bearing fault detection comprising radar signal data from 880 experiments. The results demonstrate that radar technology offers a promising alternative to traditional contact-requiring methods, enabling efficient and reliable bearing fault classification through non-invasive vibration detection.

Anahtar Kelimeler

• Bearing
• Fault detection
• Power spectral density
• Radar
• Time-domain features

Kaynakça

1. Acar YE, Cetinkal SB. 2025. SU RF Sensing Lab. Bearing Fault Diagnosis Dataset. Kaggle. https://www.kaggle.com/datasets/yunusemreacar1/su-rf-sensing-lab-bearing-fault-diagnosis-dataset (accesed date, March 15, 2025).
2. Acar YE. 2024. Radar-enabled non-contact speed estimation for rotating electrical machinery. Measurement, 235: 114989.
3. Acar YE, Saritas I, Yaldiz E. 2021. An S-band zero-IF SFCW through-the-wall radar for range, respiration rate, and DOA estimation. Measurement, 186: 110221.
4. Akar M, Hekim M, Orhan U. 2015. Mechanical fault detection in permanent magnet synchronous motors using equal width discretization-based probability distribution and a neural network model. Turk J Electr Eng Comput Sci, 23: 813–823.
5. Gu C, Huang TY, Li C, Lin J. 2017. Microwave and millimeter-wave radars for vital sign monitoring. In: Amin MG, editor. Radar for Indoor Monitoring. CRC Press, Florida, USA, pp: 199–226.
6. Brito LC, Susto GA, Brito JN, Duarte MA. 2022. An explainable artificial intelligence approach for unsupervised fault detection and diagnosis in rotating machinery. Mech Syst Signal Process, 163: 108105.
7. Ercire M, Ünsal A. 2024. Asenkron motor eş zamanlı çoklu arızalarının titreşim sinyalleri ile çok etiketli sınıflandırılması. Duzce Univ J Sci Technol, 12: 1296–1314.
8. Ertarğın M, Yıldırım Ö, Orhan A. 2023. Motor yataklarında meydana gelen arızaları tespit etmek için yeni bir tek boyutlu konvolüsyonel sinir ağı modeli. Firat Univ J Eng Sci, 35: 669–678.

9. Glowacz A, Sulowicz M, Zielonka J, Li Z, Glowacz W, Kumar A. 2025. Acoustic fault diagnosis of three-phase induction motors using smartphone and deep learning. Expert Syst Appl, 262: 125633.
10. Kao IH, Wang WJ, Lai YH, Perng JW. 2018. Analysis of permanent magnet synchronous motor fault diagnosis based on learning. IEEE Trans Instrum Meas, 68: 310–324.
11. Karabacak YE, Özmen NG. 2022. Rulmanlarda titreşim verilerinden durum izleme ve arıza teşhisi için derin öğrenme yönteminin uygulanması. Konya J Eng Sci, 10: 346–365.
12. Kilic ME, Acar YE. 2024. Performance evaluation of the time-frequency transformation methods on electrical machinery fault detection. Bitlis Eren Univ J Sci, 13: 1147–1157.
13. Liu W, Chen W, Zhang Z. 2020. A novel fault diagnosis approach for rolling bearing based on high-order synchrosqueezing transform and detrended fluctuation analysis. IEEE Access, 8: 12533–12541.
14. Lopez-Perez D, Antonino-Daviu J. 2017. Application of infrared thermography to failure detection in industrial induction motors: Case stories. IEEE Trans Ind Appl, 53: 1901–1908.
15. Mehta A, Goyal D, Choudhary A, Pabla B, Belghith S. 2021. Machine learning-based fault diagnosis of self-aligning bearings for rotating machinery using infrared thermography. Math Probl Eng, 2021: 9947300.
16. Mueller PN, Woelfl L, Can S. 2023. Bridging the gap between AI and the industry—a study on bearing fault detection in PMSM-driven systems using CNN and inverter measurement. Eng Appl Artif Intell, 126: 106834.
17. Nayana B, Geethanjali P. 2017. Analysis of statistical time-domain features effectiveness in identification of bearing faults from vibration signal. IEEE Sens J, 17: 5618–5625.
18. Pacheco-Cherrez J, Fortoul-Diaz JA, Cortes Santacruz F, Aloso Valerdi LM, Ibarra Zarate DI. 2022. Bearing fault detection with vibration and acoustic signals: Comparison among different machine learning classification methods. Eng Fail Anal, 139: 106515.
19. Qiao M, Yan S, Tang X, Xu C. 2020. Deep convolutional and LSTM recurrent neural networks for rolling bearing fault diagnosis under strong noises and variable loads. IEEE Access, 8: 66257–66269.
20. Sabir R, Rosato D, Hartmann S, Gühmann C. 2019. LSTM based bearing fault diagnosis of electrical machines using motor current signal. In: Proceedings of 18th IEEE International Conference on Machine Learning and Applications, December 16–19, Boca Raton, USA, pp: 613–618.
21. Seflek I, Acar YE, Yaldiz E. 2020. Small motion detection and non-contact vital signs monitoring with continuous wave Doppler radars. Elektron Elektrotech, 26: 54–60.
22. Smith WA, Randall RB. 2015. Rolling element bearing diagnostics using the Case Western Reserve University data: A benchmark study. Mech Syst Signal Process, 64: 100–131.
23. Zhang S, Zhang S, Wang B, Habetler TG. 2020. Deep learning algorithms for bearing fault diagnostics—A comprehensive review. IEEE Access, 8: 29857–29881.
24. Zhang Y, Xing K, Bai R, Sun D, Meng Z. 2020. An enhanced convolutional neural network for bearing fault diagnosis based on time–frequency image. Measurement, 157: 107667.
25. Zhu Z, Lei Y, Qi G, Chai Y, Mazur N, An Y, Huang X. 2023. A review of the application of deep learning in intelligent fault diagnosis of rotating machinery. Measurement, 206: 112346.