Synthesis, Characterization and Rapid Adsorptive Removal of Basic Red 46 Dye Using Magnetic FE₃O₄@CNT Composite

Öz

The rapid pollution of water resources continues to increase, particularly due to the spread of synthetic dyes from the textile industry into aquatic environments. The increasing use of toxic and poorly biodegradable compounds, such as azo dyes, poses serious risks to both ecosystem health and human health. Therefore, the need for cost-effective, fast, and efficient adsorbents is growing. In this study, a magnetic carbon nanotube composite (Fe3O4@CNT) was synthesized and its adsorption performance evaluated for the removal of Basic Red 46 (BR 46) dye from water. Fe3O4 nanoparticles were prepared using a solvothermal method and combined with CNTs to form a composite structure. FTIR, SEM-EDX, and XRD analyses showed that the composite was successfully synthesized and maintained its structural integrity after adsorption. Batch adsorption experiments were carried out to investigate the effects of contact time, initial dye concentration, adsorbent dosage, solution pH, and temperature on the adsorption performance of Fe3O4@CNT toward BR46 dye. The composite exhibited rapid kinetic behavior, achieving approximately 95% removal in just 15 minutes. In kinetic analyses, the pseudo second order model showed the best fit, while in isotherm analyses, the Langmuir model was dominant. The maximum adsorption capacity was calculated to be approximately 47 mg/g.

Anahtar Kelimeler

• Magnetic adsorbent
• Carbon nanotubes
• Adsorption

Kaynakça

1. Ahi, E. E., Torul, H., Zengin, A., Sucularlı, F., Yıldırım, E., Selbes, Y., Suludere, Z., & Tamer, U. (2022). A capillary driven microfluidic chip for SERS based hCG detection. Biosensors and Bioelectronics, 195, 113660. https://doi.org/10.1016/J.BIOS.2021.113660
2. Ali, N. S., Khader, E. H., khudhur, R. H., Abdulrahman, M. A., Salih, I. K., & Albayati, T. M. (2024). Removal of anionic azo dye from wastewater using Fe3O4 magnetic nanoparticles adsorbents in a batch system. Desalination and Water Treatment, 317, 100033. https://doi.org/10.1016/J.DWT.2024.100033
3. Alkhabbas, M., Al-Ma’abreh, A. M., Edris, G., Saleh, T., & Alhmood, H. (2023). Adsorption of Anionic and Cationic Dyes on Activated Carbon Prepared from Oak Cupules: Kinetics and Thermodynamics Studies. International Journal of Environmental Research and Public Health, 20(4), 3280. https://doi.org/10.3390/ijerph20043280
4. Bagheri, A., Yazdani, A., & Abbas, A. (2024). Selection of better cationic surfactant for zeolite modification using surface studies and its application in the removal of anionic and cationic dyes. Journal of Molecular Liquids, 403(March), 124881. https://doi.org/10.1016/j.molliq.2024.124881
5. Benettayeb, A., Seihoub, F. Z., Pal, P., Ghosh, S., Usman, M., Chia, C. H., Usman, M., & Sillanpää, M. (2023). Chitosan Nanoparticles as Potential Nano-Sorbent for Removal of Toxic Environmental Pollutants. Nanomaterials, 13(3), 1–25. https://doi.org/10.3390/nano13030447
6. Bouatay, F., Dridi-Dhaouadi, S., Drira, N., & Farouk Mhenni, M. (2016). Application of modified clays as an adsorbent for the removal of Basic Red 46 and Reactive Yellow 181 from aqueous solution. Desalination and Water Treatment, 57(29), 13561–13572. https://doi.org/10.1080/19443994.2015.1061953
7. Boumediene, M., Benaïssa, H., George, B., Molina, S., & Merlin, A. (2018). Effects of pH and ionic strength on methylene blue removal from synthetic aqueous solutions by sorption onto orange peel and desorption study. Journal of Materials and Environmental Sciences, 9(6), 1700–1711. https://doi.org/10.26872/jmes.2018.9.6.190!http://www.jmaterenvironsci.com
8. Chen, Y., Qin, S., Gao, C., Wu, X., He, M., & Zhang, D. (2025). Synthesis of iron-based metal–organic framework@bacterial cellulose aerogels by an in situ growth method for multifunctional dye removal and oil–water separation applications. RSC Advances, 15(41), 34257–34273. https://doi.org/10.1039/D5RA05250E

9. Demissie, H., An, G., Jiao, R., Ritigala, T., Lu, S., & Wang, D. (2021). Modification of high content nanocluster-based coagulation for rapid removal of dye from water and the mechanism. Separation and Purification Technology, 259, 117845. https://doi.org/10.1016/J.SEPPUR.2020.117845
10. Deniz, F., & Saygideger, S. D. (2010). Investigation of adsorption characteristics of Basic Red 46 onto gypsum : Equilibrium , kinetic and thermodynamic studies. DES, 262(1–3), 161–165. https://doi.org/10.1016/j.desal.2010.05.062
11. Deniz, F., & Saygideger, S. D. (2011). Removal of a hazardous azo dye ( Basic Red 46 ) from aqueous solution by princess tree leaf. DES, 268(1–3), 6–11. https://doi.org/10.1016/j.desal.2010.09.043
12. Duman, O., Tunç, S., Bozoğlan, B. K., & Polat, T. G. (2016). Removal of triphenylmethane and reactive azo dyes from aqueous solution by magnetic carbon nanotube-κ-carrageenan-Fe3O4 nanocomposite. Journal of Alloys and Compounds, 687, 370–383. https://doi.org/10.1016/J.JALLCOM.2016.06.160
13. El-Aziz, M. E. A., Youssef, A. M., Kamal, K. H., Kelnar, I., & Kamel, S. (2023). Preparation and performance of bionanocomposites based on grafted chitosan, GO and TiO2-NPs for removal of lead ions and basic-red 46. Carbohydrate Polymers, 305, 120571. https://doi.org/10.1016/J.CARBPOL.2023.120571
14. Gayathri, P. V., Yesodharan, S., & Yesodharan, E. P. (2019). Microwave/Persulphate assisted ZnO mediated photocatalysis (MW/PS/UV/ZnO) as an efficient advanced oxidation process for the removal of RhB dye pollutant from water. Journal of Environmental Chemical Engineering, 7(4), 103122. https://doi.org/10.1016/J.JECE.2019.103122
15. Graba, Z., Hamoudi, S., Bekka, D., Bezzi, N., & Boukherroub, R. (2015). Influence of adsorption parameters of basic red dye 46 by the rough and treated Algerian natural phosphates. Journal of Industrial and Engineering Chemistry, 25, 229–238. https://doi.org/10.1016/j.jiec.2014.10.039
16. Gubitosa, J., Cignolo, D., Rizzi, V., Fini, P., Sibillano, T., Corriero, N., Giannini, C., Caldera, F., Desoky, M. M. H., Er-rahmani, S., Trotta, F., Petrella, A., & Cosma, P. (2025). Crosslinked α-Cyclodextrin-based metal-organic frameworks: Water-stable adsorbents for enhanced removal of direct textile dyes from aqueous media. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 727, 138312. https://doi.org/10.1016/J.COLSURFA.2025.138312
17. Habibi, F., Seyyedi, M., & Ayati, B. (2022). Synthesis and Application of Reusable and Magnetic RGO/Fe3O4 Nanocomposites in BR46 Removal from an Aqueous Solution; Future Prospects of an Efficient Adsorption Platform. J. Mater. Environ. Sci, 2022(8), 8. http://www.jmaterenvironsci.com
18. Herawati, A., Aryani, R. M., Antarnusa, G., Khoiriah, & Nene, A. (2026). Fe3O4/chitosan nanocomposites for Congo red removal: Adsorption surpasses photodegradation. Materials Chemistry and Physics, 347, 131431. https://doi.org/10.1016/J.MATCHEMPHYS.2025.131431
19. Joseph, J., Radhakrishnan, R. C., Johnson, J. K., Joy, S. P., & Thomas, J. (2020). Ion-exchange mediated removal of cationic dye-stuffs from water using ammonium phosphomolybdate. Materials Chemistry and Physics, 242, 122488. https://doi.org/10.1016/J.MATCHEMPHYS.2019.122488
20. Karaca, C., Karaca, M., Kıranşan, M., Karaca, S., Açışlı, Ö., & Gürses, A. (2023). Comparison of the removal efficiencies of Basic red 46 from aqueous solutions using Aşkale lignite with and without ultrasound assisted processes. Desalination and Water Treatment, 315, 111–121. https://doi.org/10.5004/DWT.2023.30115
21. Konicki, W., & Pełech, I. (2019). Removing cationic dye from aqueous solutions using as-grown and modified multi-walled carbon nanotubes. Polish Journal of Environmental Studies, 28(2), 717–727. https://doi.org/10.15244/pjoes/85069
22. Lekhak, U. M. (2023). Ecotoxicity of synthetic dyes. Current Developments in Bioengineering and Biotechnology: Advances in Eco-Friendly and Sustainable Technologies for the Treatment of Textile Wastewater, 45–67. https://doi.org/10.1016/B978-0-323-91235-8.00021-8
23. Liu, Y., Zhao, Z., Yuan, D., Wang, Y., Dai, Y., Zhu, Y., & Chew, J. W. (2019). Introduction of amino groups into polyphosphazene framework supported on CNT and coated Fe3O4 nanoparticles for enhanced selective U(VI) adsorption. Applied Surface Science, 466, 893–902. https://doi.org/10.1016/J.APSUSC.2018.10.097
24. Medinger, J., Nedyalkova, M., & Lattuada, M. (2021). Solvothermal Synthesis Combined with Design of Experiments — Optimization Approach for Magnetite Nanocrystal Clusters.
25. Nguyen, C. H., & Juang, R. S. (2019). Efficient removal of methylene blue dye by a hybrid adsorption–photocatalysis process using reduced graphene oxide/titanate nanotube composites for water reuse. Journal of Industrial and Engineering Chemistry, 76, 296–309. https://doi.org/10.1016/J.JIEC.2019.03.054
26. Nidheesh, P. V., Zhou, M., & Oturan, M. A. (2018). An overview on the removal of synthetic dyes from water by electrochemical advanced oxidation processes. Chemosphere, 197, 210–227. https://doi.org/10.1016/J.CHEMOSPHERE.2017.12.195
27. Rapo, E., & Tonk, S. (2021). Factors Affecting Synthetic Dye Adsorption ; Desorption Studies : A Review of Results from the Last Five Years. Molecules, 26, 5419–5450.
28. Sarkar, A., Das, B., Selvaraj, M., & Basumatary, S. (2025). Development of hybrid MMT/g-C3N4/Ca–Ni–Al layered triple hydroxide composite for highly effective removal of cationic and anionic dyes for wastewater treatment. Journal of the Indian Chemical Society, 102(12), 102267. https://doi.org/10.1016/J.JICS.2025.102267
29. Satyam, S., & Patra, S. (2024). Innovations and challenges in adsorption-based wastewater remediation: A comprehensive review. Heliyon, 10(9), e29573. https://doi.org/10.1016/J.HELIYON.2024.E29573
30. Sebastian, J., Hernandez, T., Arag, A., Quintero, W. C., Camilo, J., Vel, C., Salazar-camacho, N. A., & Antonio, G. (2022). Characterization of Fe 3 O 4 Nanoparticles for Applications in Catalytic Activity in the Adsorption / Degradation of Methylene.
31. Shah, S. I. A., Ahmad, W., Anwar, M., Shah, R., Khan, J. A., Shah, N. S., Al-Anazi, A., & Han, C. (2025). Synthesis, properties, and applications of Fe3O4 and Fe3O4-based nanocomposites: A review. Applied Catalysis O: Open, 203, 207049. https://doi.org/10.1016/J.APCATO.2025.207049
32. Wang, Y., Li, J., Wang, H., Zhang, S., Zhang, J., Yang, H., Tang, X., & Zheng, H. (2025). The improvement of flocculation performance of organic polymer flocculants via regulation of their branched structure and block structure in removal of soluble dyes from wastewater. Journal of Environmental Chemical Engineering, 13(6), 119960. https://doi.org/10.1016/J.JECE.2025.119960
33. Xu, S., Yang, Y., Han, Y., Zhou, D., Liang, D., Lan, Y., Song, K., Lv, Y., & Cui, H. (2025). Engineering electron-deficient hotspots: atomic-scale design of functionalized CNTs for predictive heavy metal adsorption. Inorganic Chemistry Communications, 182, 115441. https://doi.org/10.1016/J.INOCHE.2025.115441
34. Yagub, M. T., Sen, T. K., Afroze, S., & Ang, H. M. (2014). Dye and its removal from aqueous solution by adsorption: A review. Advances in Colloid and Interface Science, 209, 172–184. https://doi.org/10.1016/J.CIS.2014.04.002
35. Yang, X., Zhu, W., Song, Y., Zhuang, H., & Tang, H. (2021). Removal of cationic dye BR46 by biochar prepared from Chrysanthemum morifolium Ramat straw : A study on adsorption equilibrium , kinetics and isotherm. Journal of Molecular Liquids, 340, 116617. https://doi.org/10.1016/j.molliq.2021.116617
36. Yang, Y., Yu, Y., Zhang, S., Li, X., Yang, G., Jiang, J., & Li, W. (2025). Flotation system for separating dyes based on Camellia oleifera saponin: Synergistic effect of hydrolysis and binary complexation. Journal of Environmental Chemical Engineering, 13(5), 117777. https://doi.org/10.1016/J.JECE.2025.117777
37. Yunus, A. I., Chen, Y., Bozeman, J. F., Darko, S. A., Darko, S. A., & Bozeman, J. F. (2025). Facile fabrication of magnetite (Fe3O4) nanoparticles by hydrothermal carbonization of waste iron supplements. RSC Sustainability, 3(8), 3530–3547. https://doi.org/10.1039/D5SU00312A
38. Zhang, X., Gao, C., Wang, R., & Han, R. (2023). Remediation of ibuprofen and naproxen in water by a green composite material of magnetic carbon nanotube–metal–organic framework. Journal of Environmental Chemical Engineering, 11(5), 111090. https://doi.org/10.1016/J.JECE.2023.111090
39. Zhu, G., Luo, J., Zhou, Q., Dai, Y., Bai, B., Zhou, Y., Feng, J., Sun, S., & Fu, H. (2026). Preparation of polyaluminum chloride by microwave hydrothermal and its composite coagulation system with chitosan for the removal of anionic dyes: Mechanism and application exploration. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 728, 138556. https://doi.org/10.1016/J.COLSURFA.2025.138556