SPUTTER YÖNTEMİYLE ELDE EDİLEN SADE VE BOR ARAYÜZEYLİ METAL/p-Si GÜNEŞ PİLLERİNİN KARAKTERİZASYONU

Yıl 2024, Cilt: 5 Sayı: 2, 1 - 12, 18.12.2024

Abdullah Bekil , Kadir Ejderha

Öz

Bu çalışmada, hazırlanan 1,167 mg/ml deiyonize su ile Borik asit ile hazırlandı. Bu çözelti kullanılarak elektrokimyasal kaplama yöntemiyle molibden bir folyo üzerine Bor kaplaması yapıldı ve bu kaplama sem görüntüleri ile teyit edildi. Sonra 1014 ila 1018 taşıyıcı yoğunluğuna (1,0,0) yönelimine sahip p tipi omik kontağı yapılmış Silisyum wafer ikiye bölünerek birinin üzerine bu çözelti elektrokimyasal yöntemle kaplandı.

Anahtar Kelimeler

Güneş Pilleri, Sputter Yöntemi, Elektrokimyasal Kaplama Yöntemi, Bor, p-Tipi Silisyum

Destekleyen Kurum

Bingöl Üniversitesi

Proje Numarası

Bap-12-261-2015

CHARACTERIZATION OF PLAIN AND BORON INTERFACE METAL/p-Si SOLAR CELLS OBTAINED BY SPUTTER METHOD

Öz

In this study, 1.167 mg/ml was prepared with Boric acid in deionized water. Using this solution, Boron coating was made on a molybdenum foil by electrochemical coating method and this coating was confirmed with SEM images. Then, the Si wafer made of p-type ohmic contact with a carrier density of 1014 to 1018 (1,0,0) orientation was divided into two and this solution was coated on one of them by electrochemical method.

Anahtar Kelimeler

Solar Cell, Sputter Methot, Elektrochemical Coating Methot, Boron, p-Type Silicon

Proje Numarası

Bap-12-261-2015

Kaynakça

• Bhattacharya D.K., Sharma R. ‘’Solid State Electronic Devices’’ 2011 Oxford University Press. P526
• Ejderha K., “Investigation of Changes in Characteristic Parameters of Metal/p-InP Schottky Diodes Prepared by Magnetron Sputtering Method Depending on Annealing and Sample Temperature” PhD Thesis, Atatürk University, Institute of Science and Technology, 2012 p.34-35
• Ismael A.I., ''Electric Energy Analysis in Monocrystalline Solar Cells'' Master's Thesis, Gazi University Institute of Science and Technology 2012 p19
• Orak I, Toprak M, Turut A ‘’ Illumination İmpact On The Electrical Characterizations Of An Al/Azure A/p-Si Heterojunction’’ Phys. Scr. 89 (2014) 115810
• Luo, X., Zhang, S.B., Wei, S.H., “Understanding Ultrahigh Doping: The Case of Boron in Silicon”, Phys.Rev.Lett., (2003) 90: 026103
• Neamen D.A.,’’Semiconductor Physics and Devices’’ 2012 Mc Graw Hill Company 4th Ed. P758
• Nripendra N. Haldera, Pranab Biswasb, Souvik Kundub, P. Banerjib, ‘’ Au/p-Si Schottky Junction Solar Cell: Effect Of Barrier Height Modification By InP Quantum Dots’’ Solar Energy Materials & Solar Cells 132 (2015) 230-236
• Sandıkçı T. A., ''Production of Boron, Selenium and Lead Doped Semiconductor Alloys and Characterization of Their Structural Properties'' Master's Thesis, Yıldız Technical University Institute of Science and Technology (2013) p3
• Sze S. M. Kwok K. Ng. ‘’Physics of Semiconductor Devices ‘’ 2010 John Wiley & Sons. P198-P815.
• Taşcıoğlu S., ''Boron and Silicon Chemistry'' 1992 Marmara University Publications p1-5
• S., ''TiO2-Based Solar Cell Production with Natural Dyes'' Master's Thesis, Kahramanmaraş Sütçü İmam University Institute of Science and Technology (2009) pIII
• Wang Yi, Shi Haiyan , Yan Jianhui and Wang Dezhi, ‘’ Preparation and Caracterization of MoB Coating on Mo Substrate’’Metals 2018, 8, 93
• Yenialaca Ç., ''Boron and Its Areas of Use'' Undergraduate Thesis, Gazi University Gazi Faculty of Education Secondary Education Science and Mathematics Education Department Physics (2009) p6-7-8
• Zafer C. , "Organic Dye Based Nanocrystal Structured Thin Film Solar Cell Production" PhD Thesis, Ege University Institute of Science and Technology (2006) p(110-111)
• Zhenghui, L., Zhaohui, Z., Xing, Z., “Atomic Structures of Boron-Induced Protrusion Features on Si(110) Surfaces”, Phys.Rev.Lett. B, (2008) 77: 035322
• Demir C., “Evaluation of Boron Minerals as Energy Source”, Master's Thesis, Selçuk University, Institute of Science and Technology, Department of Chemical Engineering, 2007. p.11-22-25