Numerical simulation of thermal deformation of a rough slider bearing and its Asperities: special reference on load generation in parallel sliders

Abstract

The present work is an attempt to analyze the influence of thermal deformation on the thermo-hydrodynamic lubrication of
infinitely long tilted pad slider rough bearings. As a consequence of heating the slider is deformed and is assumed to take a parabolic
shape. Also the asperities expand leading to smaller effective film thickness. Two different types of surface roughness are considered:
longitudinal roughness and transverse roughness. Christensen’s stochastic approach is used to derive the Reynolds-type equations.
Density and viscosity are considered to be temperature dependent. The modified Reynolds equation, momentum equation, continuity
equation and energy equation are decoupled and solved using finite difference method to yield various bearing characteristics. From
the numerical simulations it is observed that the performance of the bearing is significantly affected by the thermal deformation of the
slider and asperities and even the parallel sliders seem to carry some load.

Keywords

• Longitudinal roughness,transverse roughness,thermal deformation

Kaynakça

1. [1] Fogg, A.: Fluid Film Lubrication of Parallel Thrust Surfaces. In: Proc. Inst. Mech. Eng., 155, 49-53 (1946).
2. [2] Osterle, F., Charnes, A.: and A.Saibel, On the Solution of the Reynolds Equation for Slider Bearing Lubrication-IV- The Parallel Surface Slider Bearing without Side Leakage, Trans. ASME,1133-1136 (1953).
3. [3] Lewicki, W.: Theory of Hydrodynamic Lubrication in Parallel Sliding, Engnr., London 200, 939-941 (1955).
4. [4] Cameron, A: The viscosity Wedge, Trans. ASME 1, 248-253 (1958).
5. [5] . Young, J.: The Thermal Wedge in Hydrodynamic Lubrication, Eng. J. 45, 46-54 (1962).
6. [6] Lebeck, A.O.: Parallel Load Support in the Mixed Friction Regime, Part I-The Experimental Data, Trans. ASME, J. Trib. 109, 189-195 (1987).
7. [7] Zienkiewicz, O.C.: Temperature distribution within lubricating films between parallel bearing surfaces and its effect on the pressures developed. In: Proc. of conference on lubrication and wear, paper No. 7, Inst. Mech. eng., London, (1957).
8. [8] Rodkiewicz, C.M., Sinha, P.: On the Lubrication Theory: A Mechanism Responsible for Generation of the Parallel Bearing Load Capacity, Trans. ASME, J. Lub. Tech. 115, 584-590 (1993).

9. [9] Ezzat,H., Rhode, S.: A Study of Hydrodynamic Performance of Finite Slider Bearings, Trans. ASME, J. Lub. Tech. 95, 3, 298-307 (1973).
10. [10] Pinkus,O.: Thermal Aspects of Fluid Film Tribology, ASME Press, New York, (1990).
11. [11] Rathish, B.V., Rao, P.S., Sinha, P.: Stream Line Upwind Petrov-Gaerkin Finite Element Analysis of Thermal Effects on Load Carrying Capacity in Slider Bearings, Num. Heat Transfer. Part A: Applications 38, 305-328(2000).
12. [12] Khonsari,M.M.: A Review of Thermal Effects in Hydrodynamic Bearings. Part I: Slider/Thrust Bearings, Part II: Journal Bearings, ASLE Trans. 30, 19-33 (1987).
13. [13] Tzeng, S.T., Saibel, H.: Surface Roughness Effect on Slider Bearing Lubrication, ASME Trans. 10, 334-338 (1967).
14. [14] Christensen, H., Tonder, K.: Tribology of Roughness: Stochastic Models of Hydrodynamic Lubrication, SINTEF report 10/69-18, (1969).
15. [15] Christensen, H. Stochastic Models of Hydrodynamic Lubrication of Rough Surfaces. In: Proc. Inst. mech. Eng. 184, 1013- 1022(1969-70).
16. [16] Christensen, H., Shukla, J.B., Kumar, K.: Generalized Reynolds Equation for Stochastic Lubrication and its Application, J, Mech. Eng. Sci. 17, 262-270 (1975).
17. [17] Ramesh, J., Majumdar, C., Rao, N.S.: Thermohydrodynamic Analysis of Submerged Oil Journal Bearings Considering Surface Roughness Effects, Trans. ASME, J. Trib. 119, 100-106 (1997).
18. [18] Chang,L., Farnum,C.: A Thermal Model for Elastohydrodynamic Lubrication of Rough Surfaces, Tribology Trans. 35, 281- 286(1992).
19. [19] Huynh,B.P., Loe,S.: Influence of Location, Number and Shape of Corrugations in Slider Bearings, Anziam J. 45, C1017- C1038(2004).
20. [20] Ozap,A.A., Umur,H.: Optimum Surface Profile Design and performance Evaluation of Inclined Slider Bearings, Current Science 90, 1480-1491(2006).
21. [21] Sinha,P. and Getachew A. (2009), THD analysis for slider bearing with roughness: special reference to load generation in parallel sliders, Acta Mechanica, 207, Issue 1, pp 11.
22. [22] Getachew.A. and Sinha.P.:THD analysis for finite slider bearing with roughness: special reference to load generation in parallel sliders. Acta Mech.222, 1-15(2011).
23. [23] Getachew.A. and Sinha.P.:Thermal and roughness effects in a tilted pad slider bearing considering heat conduction through the pad and slider. Proceedings of the national academy of sciences, Section A: physical sciences. 82, 323-333(2012).