Araştırma Makalesi

3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example

Cilt: 3 Sayı: 1 9 Temmuz 2022
PDF İndir
EN

3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example

Öz

Many societies, civilizations and states have lived on the lands of Anatolia, the cradle of cultures and civilizations, from the past to the present. Each of these civilizations and states has left many works. It is very important to protect the material and moral works left to us, and transfer them to the next generations. Documentation studies should be carried out for this purpose. There are many methods for performing documentation work. The most important of these methods is the studies in the field of photogrammetry. With the photogrammetry method, the objects are modeled in three dimensions (3D) and recorded in the computer environment, and these data can be used at any time for the repair or reconstruction of the work in case of any deformation. The concept of 3D is the concept that emerges by knowing the width, height and height dimensions of the objects. One of the methods that can be used to model objects in 3D is the terrestrial photogrammetry method. With the terrestrial photogrammetry method, after the necessary data are collected from the objects, a 3D model is obtained using various software in the computer environment. In the modeling phase, it is very important to find the appropriate software. In this study, it was aimed to model the sarcophagus and tomb stele from the Roman period in Aksaray Museum using two different software. Agisoft Metashape and Pix4d software were preferred for 3D modeling. The results obtained from the software was compared in terms of the number of photos and the number of point clouds used and location accuracy. It has been observed that the error values found by the square mean error method in Agisoft software are lower than in the Pix4d software. It was observed that the Pix4d software produced more point clouds while modeling. An equal number of photographs were used in modelling.

Anahtar Kelimeler

Kaynakça

  1. Atkinson, K. B. (1996). Close- range photogrammetry and Machine vision, Whittles Publishing, Scotland.
  2. Bozdoğan, Ö., Yaman, A., & Yılmaz, H. M. (2022). An analysis on thecorrosion of a culturalheritage. International Journal of EngineeringandGeosciences, 7(2), 112-127.
  3. Böhler, W., & Heinz, G. (1999). Documentation surveying photogrammetry. XVII CIPA Symposium, Recife, Olinda Brazil.
  4. Çağlayan, U. (2020). İha verileri temelinde Agisoft, ContextCapture ve Pix4d görüntü eşleştirme yazılımlarının 3b konum doğruluğu analizi. Yüksek Lisans Tezi, Bülent Ecevit Üniversitesi, Fen Bilimleri Enstitüsü, Zonguldak.
  5. Duran, Z., Atik, M. E., & Çelik, M. F. (2017). Yersel fotogrametri yöntemi ile yersel lazer taramanın karşılaştırılması ve doğruluk analizi. İstanbul Teknik Üniversitesi Harita Dergisi, 158, 20-25.
  6. Georgopoulos, A., & Ionnidis, G. (2004). Photogrammetric and surveying methods for the geometric recording of archaeological monuments. Archaeological surveys, FIG Working Week 2004 Athens, Greece, May 22-27.
  7. Güleç, S. A. (2007). Yersel fotogrametri yöntemi ile röleve alım tekniğinin taç kapılarda uygulanışı Konya örnekleri. Yüksek Lisans Tezi, Selçuk Üniversitesi, Fen Bilimleri Enstitüsü, Konya.
  8. Kanun, E., Alptekin, A., & Yakar, M. (2021). Cultural heritage modelling using UAV photogrammetric methods: a case study of Kanlıdivane archeological site. Advanced UAV, 1(1), 24-33.

Ayrıntılar

Birincil Dil

İngilizce

Konular

Bilgisayar Görüşü ve Çoklu Ortam Hesaplama (Diğer)

Bölüm

Araştırma Makalesi

Yayımlanma Tarihi

9 Temmuz 2022

Gönderilme Tarihi

3 Haziran 2022

Kabul Tarihi

24 Haziran 2022

Yayımlandığı Sayı

Yıl 2022 Cilt: 3 Sayı: 1

Kaynak Göster

APA
Baş, G., & Yaman, A. (2022). 3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example. Cultural Heritage and Science, 3(1), 12-18. https://izlik.org/JA42AC38NA
AMA
1.Baş G, Yaman A. 3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example. Cultural Heritage and Science. 2022;3(1):12-18. https://izlik.org/JA42AC38NA
Chicago
Baş, Gizem, ve Aydan Yaman. 2022. “3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example”. Cultural Heritage and Science 3 (1): 12-18. https://izlik.org/JA42AC38NA.
EndNote
Baş G, Yaman A (01 Temmuz 2022) 3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example. Cultural Heritage and Science 3 1 12–18.
IEEE
[1]G. Baş ve A. Yaman, “3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example”, Cultural Heritage and Science, c. 3, sy 1, ss. 12–18, Tem. 2022, [çevrimiçi]. Erişim adresi: https://izlik.org/JA42AC38NA
ISNAD
Baş, Gizem - Yaman, Aydan. “3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example”. Cultural Heritage and Science 3/1 (01 Temmuz 2022): 12-18. https://izlik.org/JA42AC38NA.
JAMA
1.Baş G, Yaman A. 3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example. Cultural Heritage and Science. 2022;3:12–18.
MLA
Baş, Gizem, ve Aydan Yaman. “3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example”. Cultural Heritage and Science, c. 3, sy 1, Temmuz 2022, ss. 12-18, https://izlik.org/JA42AC38NA.
Vancouver
1.Gizem Baş, Aydan Yaman. 3D modeling of historical artifacts with terrestrial photogrammetric method: Roman sarcophagus and tomb stele example. Cultural Heritage and Science [Internet]. 01 Temmuz 2022;3(1):12-8. Erişim adresi: https://izlik.org/JA42AC38NA


Online ISSN: 2757-9050