BASED JOINT TRAJECTORY CONTROL OF 6-DOF ROBOT MANIPULATOR BY USING GENERALIZED PREDICTIVE CONTROL

Öz

In this study, generalized predictive controller (GPC) was designed for based joint trajectorycontrol of 6-DOF(Degree-Of-Freedom) robotic manipulator. Modeling of the dynamics of the robotic manipulator was made by using the Lagrange-Euler equations and the cubic trajectory principle was used for trajectory planning. Designed controller computes values of torque belonging to joints through motion. CARIMA(Controlled Auto-Regresive Integrated Moving Average) model was used for prediciton model. The parameter estimation was carried out using the RLS(Recursive Least Squares.

Anahtar Kelimeler

• Robotic control,trajectory planning,predictive contol

ÖNGÖRÜLÜ KONTROL İLE ALTI EKLEMLİ BİR ROBOT KOLUNUN EKLEM ESASLI YÖRÜNGE KONTROLÜ

Öz

Bu çalışmada altı eklemli bir robot kolunun eklem esaslı yörünge kontrolü için genelleştirilmiş öngörülü kontrolör (GPC) tasarlanmıştır. Robot kolunun dinamik modellemesinde Lagrange-Euler yöntemi kullanılmış, yörünge planlaması sinüzoidal yörünge prensibine göre yapılmıştır. Tasarlanan kontrolör, istenilen yörünge boyunca robot kolu eklemlerini kontrol edecek uygun tork değerlerini üretmektedir. Öngörü modeli için CARIMA (Controlled Auto Regressive Integrated Moving Average) doğrusal formu kullanılmış, parametre kestirim işlemi ise en küçük kareler yöntemi (Recursive Least Squares-RLS) ile gerçeklenmiştir.       

Anahtar Kelimeler

• Robot kontrolü,yörünge planlaması,öngörülü kontrol

Kaynakça

1. [1] H. Temurtaş, “Üç Eklemli Bir Robot Kolunun Nöro Genelleştirilmiş Öngörülü Kontrol İle Eklem Esaslı Yörünge Kontrolü”, Doktora Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, (2004).
2. [2] F.C. Sun, Z.Q. Sun, and P.Y. Woo, “Neural network-based adaptive controller design of robotic manipulators with an observer”, IEEE Transactions Neural Networks, 12 (1), 55 (2001).
3. [3] F. Alonge, F.D. Ippolito, and F.M. Raimondi, “An adaptive control law for robot manipulators without velocity feedback”, Control Engineering Practice, 11, 1000 (2003).
4. [4] O. Nasisi and R. Carelli, “Adaptive servo visual robot control”, Robotics and Autonomous Systems, 43, 54 (2003).
5. [5] D.W. Clarke, C. Mohtadi, and P.C. Tuffs, “Generalized predictive control - part 1: The basic algorithm”, Automatica, 23, 137-145 (1987).
6. [6] D.W. Clarke, C. Mohtadi, and P.C. Tuffs, “Generalized predictive control - part 2: The basic algorithm”, Automatica, 23, 149-163 (1987).
7. [7] D.W. Clarke, C. Mohtadi, and P.C. Tuffs, “Generalized predictive control: A new robust self-tuning algorithm in landau, I. D., and L. Dugard (Editors). Commande Adaptive - Aspects Pratiques et Theoriques, Masson, Paris, 220 (1987).
8. [8] D.W. Clarke and L. Zhang, “Long-range predictive control using weighting-sequence models”, Control Theory and Applications, 134(3), 194 (1987).

9. [9] D.W. Clarke and C. Mohtadi, “Properties of generalized predictive control” Automatica, 25(6), 870 (1989).
10. [10] J. Zhang, J. Wei, and T. Zhong, “A generalized predictive controller to a thermal process for batch dyeing process”, International Conference on Information Acquisition 2004, China, 433 (2004).
11. [11] J.E. Normey-Rico and E.F. Camcho, “Robust design of GPC for process with time delay”, International Journal Robust Nonlinear Control, 10(13), 1110 (2000).
12. [12] B. Armstrong, O. Khatib, and J. Burdick, “The explicit dynamic model and inertial parameters of the PUMA 560 arm”, IEEE Conference on Robotics and Automation, 3, 516 (1986).
13. [13] M.W. Spong and M. Vidyasagar, “Robot Dynamics and Control”, John Wiley & Sons, New York, 50 (1989).
14. [14] J. Draye, D. Pavisic, G. Libert, “Dynamic recurrent neural network: a dynamical analysis”, IEEE Transactions on Systems Man and Cybernetics Part B 26(5), 700 (1996).
15. [15] J. Rodrigo, H.A. Marcelo, D. Oetomo, O. Khatib, T.M. Lim, S.Y. Lim, “The operational space formulation implementation to aircraft canopy polishing using a mobile manipulator”, International Conference on Robotics&Automation, Whashington D C. USA, 400 (2002).
16. [16] F. Temurtas, H. Temurtas, and N. Yumusak, “Application of neural generalized predictive control to robotic manipulators with a cubic trajectory and random disturbances”, Robotics and Autonomous Systems, 54, 82 (2005).