EFFECTS OF HEAT TREATMENT ON TECHNOLOGICAL PROPERTIES OF WOOD MATERIAL

Yıl 2010, Sayı: 023, 71 - 84, 15.12.2010

Mustafa Altınok , Osman Perçin Şemsettin Doruk

Öz

Thermo
process is without using chemical material for modification method of wood and was recently introduced to Turkey. This study was
conducted to determine some technological properties of the applied heat
treatment wood materials blackpine (Pinus nigra var. pallasiana) and ash (Fraxinus exelsior L.) wood.
Thereafter each sample was tested for observation of air dry density, oven dry
density,  volumetric swelling, volumetric shrinkage,
water permeability and torsion were determined. The results indicated that
the heat treatment method decreased  the
air dry density and oven dry density. However, important increase was observed
for volumetric swelling, volumetric shrinkage, water permeability and torsion strenght value. 

Anahtar Kelimeler

heat treatment, wood material, technological properties

ISIL İŞLEMİN (THERMO-PROCESS) AĞAÇ MALZEMENİN TEKNOLOJİK ÖZELLİKLERİNE ETKİSİNİN İNCELENMESİ

Öz

Termo-işlem
(thermo-process) kimyasal madde kullanmadan ağaç malzemenin modifikasyonu için
kullanılan bir yöntemdir ve endüstriyel anlamda Türkiye’de yeni uygulanmaya
başlamıştır. Bu çalışmada; karaçam (Pinus nigra var. pallasiana) ve dişbudak (Fraxinus exelsior L.) odunlarına
ısıl işlem uygulamasının odunlarda hava kurusu yoğunluk, tam kuru yoğunluk,
boyutsal çalışmalardan hacimsel değişim (şişme ve çekme), su geçirgenliği ve
çarpılma (burulma) özellikleri belirlenmiştir. Çalışma sonucunda; ısıl işlem uygulamasının ağaç malzemelerin
hava kurusu yoğunluk ve tam kuru yoğunluk özelliklerini önemli oranlarda düşürmüştür.
Bununla beraber hacimsel çekme ve şişme, su geçirgenlik direncinde önemli
derecede direnç artışı olurken ağaç malzemenin çarpılma veya burulma
özellikleri üzerine de olumlu etkisinin olduğu görülmüştür.

Anahtar Kelimeler

ısıl işlem, ağaç malzeme, teknolojik özellikler

Kaynakça

• [1] Bourgois, J., Bartholin, M.C., Guyennet, R.. Thermal Treatment of Wood: analysis of theobtained product. Wood Science and Technology 23(4): 303-310. 1998
• [2] Tjeerdsma, B.F.; Boonstra, M.; Militz, H. Thermal modifi cation of non-durable wood species2. Improved wood properties of thermal treated wood, In Proceedings of 29th Annual meeting,Maastricht-The Low Countries, 14-19 May, Doc. No. IRG/WP/98–40124. 1998
• [3] Mayes, D. and Oksanen, O. (2002) ThermoWood Handbook, Finnforest, Finland
• [4] Kamdem, D.P., Pizzi, A., Jermannaud, A.,. Durability of heattreated wood. Holz als Roh-und Werkstoff 60, 1–6. 2002
• [5] Mitchell, P.H., Irreversible property changes of small loblolly pine specimens heated in air, nitrogen, or oxygen. Wood and Fiber Science 20 (3), 320–355. 1988
• [6] Ja¨msa¨ , S., Viitaniemi, P.,. Heat treatment of wood better durability without chemicals. In: Rapp A.O. (Ed.), Review on Heat Treatments of Wood. Cost Action E22. Proceedings of the Special Seminar, Antibes, France, pp. 17–22. 2001
• [7] Mazela, B., Zakrzewski, R., Grzes’ kowiak, W., Cofta, G., Bartkowiak, M., Resistance of thermally modified wood to basidiomycetes. Wood Technology 7 (1), 253–262. 2004
• [8] Unsal, Ö. ve Ayrılmış, N.. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensisv Dehn.) wood, Journal of Wood Science 51:405–409. 2005
• [9] Aydemir, D.. Göknar (Abies bormülleriana Mattf.) ve Gürgen (Carpinus betulus L.) Odunlarının bazı fiziksel, mekanik veteknolojik özellikleri üzerine ısıl işlemin etkisi, Z.K.Ü. Fen Bilimleri Enst., Yüksek Lisans Tezi. 2007
• [10] Korkut, S., The effects of heat treatment on some technological properties in Uludağ fir (Abies bornmuellerinana Mattf.)wood, Building and Environment, Volume 43, Issue 4, pp. 422-428. 2008:
• [11] Rozsa., M.E., Fortes M.A., Effects os Water Vapour Heatin on Structure and Properties of Cork, Wood Science Technology, 23, 27-34,1989
• [12] Viitaniemi P., Decay resistant wood created in a Heating process, İndustrial Horizons, - 23, December 1997
• [13] Schneider, A., Investigations on the Influence of Heat Treatment in the temperature Range 100-200oC on modulus of Elasticit., Holz Roh-u Werkstoff, 29(11): 431-440. 1971
• [14] Voss,K., Heat treatment of hardboards, Holz Roh-u. Werkstoff, Vol:10, No: 8, 299-305, 1952
• [15] Vital, B. R. and Lucia, M. D. Effect of heating on some properties of Eacalyptus saligna Wood, Revista-Arvore, 7(2): 136-146. 1983
• [16] Unsal, O. and Ayrilmis, N. Variations in compression strength and surface roughness of heat-treated Turkish river red gum (Eucalyptus camaldulensis) wood, J Wood Sci, 51: 405–409. 2005
• [17] Unsal, O, Korkut, S. and Atik, A., The Effect of Heat Treatment on Some Properties and Colour in Eucalyptus(Eucalyptus camaldulensis Dehn.) Wood, Maderas Ciencia y tecnologia, 5(2): 145–152. 2003
• [18] Yıldız, S. Physical, mechanical, technological and chemical properties of Fagus orientalis and Picea orientalis wood treated by heat, PhD Thesis, Blacksea Technical University, Trabzon, Turkey, p: 245. 2002
• [19] Korkut,S., Kök, M.S., Korkut,D. And Gürleyen,T., The effects of heat treatment on technological properties in Red-bud maple (Acer trautvetteri Medw.) wood, Bioresource Technology,Volume 99, Issue 6, April 2008, Pages 1538-1543
• [20] Özçifçi, A., Altun,S., Yapıcı, F., Isıl işlem uygulamasının ağaç malzemenin teknolojik özelliklerine etkisi, 5. Uluslararası İleri Teknolojiler Sempozyumu (IATS’09), 13-15 Mayıs 2009,
• [21] Viitaniemi, P., ThermoWood – Modified wood for improved performance. In: Proceedings of wood the ecological material the 4th Euro-wood symposium. Stockholm, Sweden. Sep 22-23 1997 Trätek Rapport. 9709084, pp 67–69, 1997.
• [22] Santos, J. A., Mechanical behaviour of Eucalyptus wood modified by heat. Wood Science and Technology. 34, 39-43, 2000.
• [23] Stamm, A. J. and Baechler, R. H. Decay resistance and dimensional stability of five modified woods, Forest Products Journal, Vol:10, No:1, 22–26. 1960
• [24] Yun, K. E., Kim, G. H. and Kim, J. J. Effect of heat treatment on the dimensional stability and bending properties of radiata pine sapwood, Journal of Korean Wood Science and Technology, 27(4): 30–37. 1999
• [25] D’yakanov, K.F., Kur’yanova,T.K., Shchekin, V.A., 1989, Reducing Swelling and Limit of Hygroscopicity od wood , Derevoobrabatyvayushchaya- Promb-shlennost, Vol:5, 12-13
• [26] Millett, M. A. and Gerhards, G. C. (1972) Accelerated aging: residual weight and flexural properties of wood heated in air at 115 °C to 175 °C, Wood Science, 4(4): 193–201.
• [28] Seborg,R.M., Tarkow, H., and Stamm A.J., 1953, Effect of Heat upon The Dimensional Stabilization Of Wood, Forest Products Research Society. Journal, Vol:3, No: 3, 59-67