INVESTIGATION OF FLUID-STRUCTURE INTERACTION BY USING SOLIDITY RATIO

Abstract

In this study, fluid-structure interaction problem is investigated by solidity ratio approach. In the first case (Case I) steady flow conditions are defined by using air as fluid. The wind forces acting on the space lattice systems are determined by considering the solidity ratio dictated by ANSI/TIA-222-G (Steel Antenna Towers and Antenna Supporting Structures) technical specification. Stability of wind tower is analyzed using SAP 2000 software program. In the second case (Case II) unsteady flow conditions are evaluated by utilizing water waves acting on lattice marine structures. Models are occurred two groups as three space frame structures and three porous media models. Hydrodynamic wave forces are represented by the Stoke’s Second Order wave theory. Morison equation is employed to obtain lateral wave forces. The results of computational fluid dynamics are performed by using ANSYS-Fluent software. Solidity ratio is used to observe vortex effect that is based on turbulence around the structural members. The hydrodynamic forces acting on the marine structures are presented independent from configuration, depending on solidity ratio values.

Keywords

• Fluid-Structure Interaction,Hydrodynamic Forces,Solidity Ratio

Kaynakça

1. A. Korobenko, M. C. Hsu, I. Akkerman, J. Tippmann, and Y. Bazilevs, “Structura lmechanics modeling and FSI simulation of wind turbines,” Mathematical Models and Methods in Applied Sciences, vol. 23, no. 2, pp. 249–272, 2013.
2. ANSYS Fluent Users Guide, ANSYS, Canonsburg, PA, USA, 2013.
3. CERC. (2002). Coastal engineering manual, Wave Mechanics, Part II, USA.
4. Christensen, E. D., Hansen, Yde, E. A. L., Tarp-Johansen, Gravesen, N. J. H., and Damsgaard, M. L., “Wave loads on offshore wind turbine foundations in shallow water: engineering models vs. refined flow modelling,” in Proceedings of the European Offshore Wind Conference, pp. 4–6, Berlin, Germany, December 2007.
5. Dagli, B. Y., Tuskan, Y., & Gökkuş, Ü. (2018). Evaluation of Offshore Wind Turbine Tower Dynamics with Numerical Analysis. Advances in Civil Engineering, 2018.
6. Ergin, A., 2009. Coastal Engineering. Metu Press. Turkey.
7. Friez, P.A., 2011. Offshore Structure Design and Construction. Ships and Offshore Structures. Encyclopedia of Life SupportSystems. UK.
8. Karadeniz, H. (2001). Uncertainty modeling in the fatigue reliability calculation of offshore structures. Reliability Engineering & System Safety, 74(3), 323-335.

9. Kudale, M. D. and Bhalerao, A. R., “Equivalent monochromatic wave height for the design of coastal rubble mound structures,” Aquatic Procedia, vol. 4, pp. 264–273, 2015.
10. Lee, M. M. K., (1999).Strength, stress and fracture analyses of offshore tubular joints using finite elements, Journal of Constructional Steel Research, vol. 51, no. 3, pp. 265–286.
11. Nizamani, Z., 2015. Environmental Load Factors and System Strength Evaluation of Offshore Jacket Platforms. Springer International Publishing, Switzerland.
12. Telecommunications Industry Association (TIA), 2005, Structural Standards For Steel Antenna Towers And Supporting Structures. USA, 120p.
13. Versteeg, H.K., 2007. Malalaseker, An introduction to Computational Fluid Dynamics. The Finite Volume Method. Pearson Education. Longman Scientific Technical. England.
14. Wei,K., Arwade, S. R., and Myers, A. T., “Incrementalwindwaveanalysis of thestructuralcapacity of offshore wind turbinesupportstructuresunderextremeloading,” EngineeringStructures, vol. 79, pp. 58–69, 2014.