Thermal Change for Heat Exchanger Cooling System of PCM

Abstract

A current study is presented in which a real-size room at daytime is cooled by a heat charge and discharge in a latent-heat-storage unit of phase changed materials. The unit is designed as a shell-and-tube heat exchanger. The tubes are vertical and filled with a phase-change material. The PCM melts and the room air is cooled down to a comfortable level, which lasts as long as the PCM is melting. While the ambient temperature changes from 35◦C to 45◦C, the comfortable time and variations are analytically calculated. Some cases are considered: an insulated room, a room heated by the ambient. By using the averaged values defined for the phase changed materials, the obtained analytical calculations and solutions are carried out with the available data in the literature. It is shown that the present theoretical study results related to the cooling using ambient conditions and the different dimensions will have an effect on the time of cooling.In addition, it can be seen from the results that dimension has a dominant effect on the temperature of stored energy than conditions.

Kaynakça

1. . N. Yüksel, and A. Avcı, “The Modelling of Energy Storage System (in Turkish)”, Journal of Thermal Science and Technology, 2, 23, 2003.
2. . N. Yüksel, “The Modeling and Optimization of Energy Storage Systems (in Turkish)”, Master Thesis, Natural and Applied Sciences, Uludağ University, Bursa, 130 pages, 2004.
3. . N. Yüksel, A. Avci, and M. Kilic, “A Model for Latent Heat Energy Storage Systems”, Int. Journal of Energy Research, 30, 14, 1146–1157, 2006.
4. . N. Yüksel, and A. Avcı, “The Effect of Phase Change Material on Exhaust Waste Heat Recovery from Diesel Engine (in Turkish)”, VI. Automotive Technology Congress, 04 - 05 June 2012, 160 pages, Bursa, Turkey.
5. . N. Yüksel, and A. Avcı, “The Effect of Operating Parameters on Thermal Storage System with PCM (in Turkish)”, I. National Air Conditioning, Refrigeration Education Congress, 05 – 07 September 2012, Balikesir, Turkey.
6. . N.Yüksel, A. Avcı, and M. K. İşman, “The Effect of Phase Change Material on the Thermal Energy Storage System (in Turkish)”, in 19th National Congress of Thermal Sciences and Technology, 9-12 September 2013, Samsun, Turkey.
7. . M. M. Farid, and A. Kanzawa, “Thermal Performance of a Heat Storage Module Using PCMs with Different Melting Temperatures: Mathematical Modeling,” Journal of Solar Energy Engineering, 111, 152–157, 1989.
8. . M. Lacroix, “Numerical Solution of a Shell-and-Tube Latent Heat Thermal Energy Storage Unit,” Solar Energy, 50(4), 357–367, 1993.

9. . J. R. Turnpenny, D.W. Etheridge, and D. A. Reay, “Novel Ventilation Cooling System for Reducing Air Conditioning in Buildings. I. Testing and Theoretical Modeling,” Applied Thermal Engineering, 20, 1019–1038, 2000.
10. . J. R. Turnpenny, D.W. Etheridge, and D. A. Reay, “Novel Ventilation Cooling System for Reducing Air Conditioning in Buildings. II. Testing of a Prototype,” Applied Thermal Engineering, 21, 1203–1217, 2000.
11. . S. Mozhevelov, G. Ziskind, and R. Letan, “Numerical Study of Temperature Moderation in a Real Size Room by PCM-Based Units”, Heat Transfer in Components and Systems for Sust. En. Tech., France, April 5–7, 2005.
12. . S. Mozhevelov, “Cooling of Structures by a Phase-Change Material (PCM) in Natural and Forced Convection”, M.Sc. thesis, Mechanical Engineering Department, Ben-Gurion University of the Negev, Beer-Sheva, Israel, 2004.
13. . G. Arye, and R. Guedj, “A PCM-Based Conditioner”, Heat Transfer Laboratory, Mechanical Engineering Department, Ben-Gurion University of the Negev, Beer-Sheva, Israel, final report 13-04, 2004.
14. . A.H. Mosaffaa, F. Talati, H. Basirat Tabrizi, and M.A. Rosen, “Analytical modeling of PCM solidification in a shell and tube finned thermal storage for air conditioning systems”, Energy and Buildings 49, 356–361, 2012.
15. . S.M. Vakilaltojjar, and W. Saman, “Analysis and modelling of a phase change storage system for air conditioning applications”, Applied Thermal Engineering 21, 249–263, 2001.
16. . M. Akgun, O. Aydin, K. Kaygusuz, “Experimental study on melting/solidification characteristics of a paraffin as PCM”, Energy Conversion and Management 48, 669–678, 2007.
17. . M.J. Hosseini, A.A. Ranjbar, K. Sedighi, and M. Rahimi, “A combined experimental and computational study on the melting behavior of a medium temperature phase change storage material inside shell and tube heat exchanger”, Int. Commun. Heat and Mass Transfer 9 (39), 1416–1424, 2012.
18. . M.J. Hosseini, M. Rahimi, and R. Bahrampoury, “Experimental and computational evolution of a shell and tube heat exchanger as a PCM thermal storage system”. International Comm. in Heat and Mass Transfer 50, 128–136, 2014.
19. . F. Agyenim, P. Eames, and M. Smyth, “Heat transfer enhancement in medium temperature thermal energy storage system using a multitube heat transfer array”, Renew. Energy 35, 198–207, 2010.
20. . F. Agyenim, P. Eames, and M. Smyth, “Experimental study on the melting and solidification behaviour of a medium temperature phase change storage material (Erythritol) system augmented with fins to power a LiBr/H2O absorption cooling system”, Renew. Energy 36, 108–117, 2011.
21. . F. Agyenim, and N. Hewitt, “The development of a finned phase change material (PCM) storage system to take advantage of off-peak electricity tariff for improvement in cost of heat pump operation”, Energy Build. 42, 1552–1560, 2010.
22. . F. Agyenim, P. Eames, and M. Smyth, “A comparison of heat transfer enhancement in a medium temperature thermal energy storage heat exchanger using fins”, Sol. Energy 83, 1509–1520, 2009.
23. . A. Erek, Z. Ilken and M. A. Acar, “Experimental and numerical investigation of thermal energy storage with a finned tube”, Int. J. Energy Res., 29, 283–301, 2005.
24. . Y. Zhang, and A. Faghri, “Heat transfer enhancement in latent heat thermal energy storage system by using an external radial finned tube”, Journal of Enhanced Heat Transfer 3, 119–127, 1996.
25. . A. Sciacovelli, F. Colella and V. Verda, “Melting of PCM in a thermal energy storage unit: Numerical investigation and effect of nanoparticle enhancement”, Int. J. Energy Res. 37, 1610–1623, 2013.
26. . M. Kutz, Heat Transfer Calculations, 1th ed., Chapter 39, McGraw-Hill, 768 pages, 2005
27. . J. P. Holman, Heat Transfer, 8th ed., McGraw-Hill, New York, New York, 1997.
28. . Arabacigil B., Yüksel N., Avcı A., “The use of paraffin wax in a box-type solar cooker having inner and outer reflectors”, Thermal Science, Vol. 19, No. 5, pp. 1663-1671, 2015.
29. . Yüksel N., Arabacigil B., Avcı A., “The thermal analysis of paraffin wax used in a box-type solar cooker”, Journal of Renewable and Sustainable Energy, 4 (6), 433-441, 2012.