Derleme
BibTex RIS Kaynak Göster

Macro and Micro Modeling of the Unreinforced Masonry Shear Walls

Yıl 2019, Cilt: 3 Sayı: 2, 116 - 123, 10.10.2019

Öz

Masonry
structures are constructed by joining masonry units (brick, stone, marble etc.)
with mortar.  Various methods are used
for modeling of masonry walls of the structures. Micro modeling and Macro modeling
are two diverse modeling techniques. In this study, these two modeling
strategies are analyzed on a solid unreinforced masonry shear wall numerically.
The models are implemented in ANSYS software to simulate the structural
behavior of a tested wall in literature. The homogenization technique is
applied to obtain the material parameters used in the macro model. Brick and
mortar are modelled separately in the micro model. Stresses occurring in the
walls under the effect of in-plane loads are investigated. The propagations of
the cracks on the walls are analyzed numerically. The results obtained in the
micro modeling and macro modeling are in consistent with the experimental study
in the literature. However, macro modeling and micro modeling represent
strictly disparate behavior in the material identification, and crack
propagations.

Kaynakça

  • [1]. R.D. Quinteros, S. Oller, L.G. Nallim, “Nonlinear homogenization techniques to solve masonry structures problems,” Composite Structures., vol. 94, pp. 724–730, 2012. [2]. H.O. Köksal, B. Doran, A.O. Kuruscu, A. Kocak, “Elastoplastic finite element analysis of masonry shear walls,” KSCE Journal of Civil Engineering., vol. 20, pp. 784-791, 2016. [3]. J. Idris, M. Al Heib, T. Verdel, “Masonry Joints Mechanical Behavior Evolution in Built Tunnels,” Tunneling and Underground Space Technology, vol. 24, pp. 617-626. 2009. [4]. M. Bolhassani, A.A. Hamid, A.C.W. Lau, F. Moon, “Simplified micro modeling of partially grouted masonry assemblages,” Construction and Building Materials, vol. 83, pp. 159-173 September 2015. [5]. Lourenço, “Computational Strategies For Masonry Structures” Doctoral dissertation, Delft University of Technology, The Netherlands, 1996. [6]. P.B. Lourenço, J.G. Rots, J. Blaauwendraad, “Two Approaches for the Analysis of Masonry Structures: Micro and Macro-Modeling,” Heron, vol. 40, 1995. [7]. S. Oller, Numerical Simulation of Mechanical Behavior of Composite Materials, Barcelona, Spain, Springer, 2014. [8]. A.Th. Vermeltfoort, T.M.J. Raijmakers, “Deformation controlled meso shear tests on masonry piers,” The Netherlands: Building and Construction Research, Eindhoven, Report B-92-1156, TNO-BOUWrrU, 1992.
Yıl 2019, Cilt: 3 Sayı: 2, 116 - 123, 10.10.2019

Öz

Kaynakça

  • [1]. R.D. Quinteros, S. Oller, L.G. Nallim, “Nonlinear homogenization techniques to solve masonry structures problems,” Composite Structures., vol. 94, pp. 724–730, 2012. [2]. H.O. Köksal, B. Doran, A.O. Kuruscu, A. Kocak, “Elastoplastic finite element analysis of masonry shear walls,” KSCE Journal of Civil Engineering., vol. 20, pp. 784-791, 2016. [3]. J. Idris, M. Al Heib, T. Verdel, “Masonry Joints Mechanical Behavior Evolution in Built Tunnels,” Tunneling and Underground Space Technology, vol. 24, pp. 617-626. 2009. [4]. M. Bolhassani, A.A. Hamid, A.C.W. Lau, F. Moon, “Simplified micro modeling of partially grouted masonry assemblages,” Construction and Building Materials, vol. 83, pp. 159-173 September 2015. [5]. Lourenço, “Computational Strategies For Masonry Structures” Doctoral dissertation, Delft University of Technology, The Netherlands, 1996. [6]. P.B. Lourenço, J.G. Rots, J. Blaauwendraad, “Two Approaches for the Analysis of Masonry Structures: Micro and Macro-Modeling,” Heron, vol. 40, 1995. [7]. S. Oller, Numerical Simulation of Mechanical Behavior of Composite Materials, Barcelona, Spain, Springer, 2014. [8]. A.Th. Vermeltfoort, T.M.J. Raijmakers, “Deformation controlled meso shear tests on masonry piers,” The Netherlands: Building and Construction Research, Eindhoven, Report B-92-1156, TNO-BOUWrrU, 1992.
Toplam 1 adet kaynakça vardır.

Ayrıntılar

Konular Mühendislik
Bölüm Makaleler
Yazarlar

Sedat Komurcu 0000-0003-2981-0755

Abdullah Gedikli

Yayımlanma Tarihi 10 Ekim 2019
Yayımlandığı Sayı Yıl 2019 Cilt: 3 Sayı: 2

Kaynak Göster

APA Komurcu, S., & Gedikli, A. (2019). Macro and Micro Modeling of the Unreinforced Masonry Shear Walls. European Journal of Engineering and Natural Sciences, 3(2), 116-123.
AMA Komurcu S, Gedikli A. Macro and Micro Modeling of the Unreinforced Masonry Shear Walls. European Journal of Engineering and Natural Sciences. Ekim 2019;3(2):116-123.
Chicago Komurcu, Sedat, ve Abdullah Gedikli. “Macro and Micro Modeling of the Unreinforced Masonry Shear Walls”. European Journal of Engineering and Natural Sciences 3, sy. 2 (Ekim 2019): 116-23.
EndNote Komurcu S, Gedikli A (01 Ekim 2019) Macro and Micro Modeling of the Unreinforced Masonry Shear Walls. European Journal of Engineering and Natural Sciences 3 2 116–123.
IEEE S. Komurcu ve A. Gedikli, “Macro and Micro Modeling of the Unreinforced Masonry Shear Walls”, European Journal of Engineering and Natural Sciences, c. 3, sy. 2, ss. 116–123, 2019.
ISNAD Komurcu, Sedat - Gedikli, Abdullah. “Macro and Micro Modeling of the Unreinforced Masonry Shear Walls”. European Journal of Engineering and Natural Sciences 3/2 (Ekim 2019), 116-123.
JAMA Komurcu S, Gedikli A. Macro and Micro Modeling of the Unreinforced Masonry Shear Walls. European Journal of Engineering and Natural Sciences. 2019;3:116–123.
MLA Komurcu, Sedat ve Abdullah Gedikli. “Macro and Micro Modeling of the Unreinforced Masonry Shear Walls”. European Journal of Engineering and Natural Sciences, c. 3, sy. 2, 2019, ss. 116-23.
Vancouver Komurcu S, Gedikli A. Macro and Micro Modeling of the Unreinforced Masonry Shear Walls. European Journal of Engineering and Natural Sciences. 2019;3(2):116-23.