A wide-band tunable
Low-Noise Amplifier (LNA) was designed to be used in military radios. The LNA
works in the frequency range of 30–512 MHz where military walkie-talkies
operate. To cover the wide range of operating frequencies, the output of
amplifier is divided into four sub-bands with four separate external inductors
and integrated capacitor arrays. The first part of the study analyzes the
performance parameters such as the gain, tuning, matching, noise figure, and
distortion. Layout of the design was completed, and post-layout simulations,
including the layout parasitic effects, were run to quantify the performance.
The LNA achieves a minimum of 12-dB gain across the entire operating frequency
range. The minimum rejections achieved by the LNA at 10% and 20% offset from
the center-tuned frequency were 7 dB and 13 dB, respectively. The LNA achieves
a worst-case noise figure of 4.6 dB, and the impedance-match parameter (S11) is
better than −20 dB under all the conditions. The worst cases P1dB (1-dB
Compression Point) and IIP3 (3rd Order Input Intercept Point) were 9.1 dBm and
18 dBm, respectively, across frequency and process–voltage–temperature corners.
The design dissipates 20 mA from a 3.3-V power supply and uses a 1.5-V power supply for capacitor array termination.
Tunable LNA military radio wide-band LNA cascode amplifier IIP3
Birincil Dil | İngilizce |
---|---|
Konular | Mühendislik |
Bölüm | Makaleler |
Yazarlar | |
Yayımlanma Tarihi | 23 Şubat 2018 |
Yayımlandığı Sayı | Yıl 2018 Cilt: 18 Sayı: 1 |