Olimpik Halter Kaldırışlarının Bazı Biyomekanik Ölçümlerinde Kullanılan Android BarSense Yazılımının Geçerliği

Yıl 2018, Cilt: 23 Sayı: 3, 171 - 182, 01.07.2018

İzzet İnce , Gökhan Çalışkan Ercan Ayılgan

Öz

Bu
çalışmanın amacı, BarSense Log (BSY) yazılımıyla ölçülen koparma kaldırışı
zirve hız (ZH), ortalama hız (OH), zirve güç (ZG), ortalama güç (OG) ve kuvvet
(K) ölçümlerinin geçerliğinin incelenmesidir. Çalışmaya en az 2 yıl halter
deneyimi olan 34 genç halterci  (ortalama
yaş 15,97 ± 0,92, boy 170,34 ± 6.7, vücut ağırlığı 72,69 ± 14,6) gönüllü olarak
katılmıştır. Çalışmada referans ölçümler için Tendo Power and Speed Analyzer
cihazı (BSY) kullanılmıştır. Katılımcıların koparma kaldırışları 1
tekrar maksimumlarının % 70’ndeki 2 kaldırışı analize alınmıştır. İstatistiki
analizde Bağımlı Örneklem T-Testi, Deming Regresyon, Bland-Altman metodu
kullanılmıştır.  Analiz sonuçlarına göre BSY
ve TP'nin  ZH, OG, OH, ZG, ölçümleri
ortalamaları arasındaki farkın istatistiki açıdan önemli olduğu belirlenmiştir
(p<0,05). F ölçümlerinde ortalamalar arasında fark önemli olmamasına rağmen (P<0,05)
Blant-Altman grafiğine göre farklar ve ortalamalar arasında uyumun iyi
olmadığı görülmüştür. Sonuç olarak bu çalışmanın bulguları, BSY’nin  olimpik halter kaldırışları ZH, OH, ZG, OG ve
K ölçümleri için kullanılamayacağını göstermektedir.

Anahtar Kelimeler

Olimpik Halter, Koparma, Silkme, BarSense, TendoPower

Validity of Android BarSense Software Used in Some Biomechanical Measurements of Olympic Weightlifting

Öz

The aim of this study is to examine the validity of the snatch peak velocity (PW), average velocity (AV),
power (PP), average power (AP) and force (F) measurements made with the BarSense software.
34 young weightlifters (mean age 15,97±0,92, height 170,34±6.7, body weight 72,69±14,6) participated
in the study voluntarily. Tendo Power and Speed Analyzer was used for reference measurements in the
study. Analysis were included the 2 lifts of 70% snatch lifts of 1 repeat maximums. T-Test, Deming
Regression, Bland-Altman method were used in the statistical analysis. According to the results of the
analysis, it was determined that the difference between BS and TendoPower PV, AV, PP, AP was
statistically significant (p <0,05). Although the difference between the F measurements was not
significant according to Blant-Altman graph, the concordance between the differences and the
averages is not good. The findings of this study show that BarSense software can not be used for PV, AV,
PP, AP and Fmeasurements for olympic lifts. 

Anahtar Kelimeler

Olympic Weightlifting, Snatch, Clean&Jerk, BarSense, Tendo Power

Kaynakça

• Burdett, R. G. (1982). Biomechanics of the snatch technique of highly skilled and skilled weightlifters. Research Quarterly for Exercise and Sport, 53(3), 193-197.
• Garhammer, I. (1993). A Review of Power Output Studies of Olympic and Powerlifting: Methodology, Performance. Journal of Strength and Conditioning Research, 7(2), 76-89.
• Garnacho-Castano, M. V., Lopez-Lastra, S., & Mate-Munoz, J. L. (2015). Reliability and validity assessment of a linear position transducer. J Sports Sci Med, 14(1), 128-136.
• Gourgoulis, V., Aggelousis, N., Mavromatis, G., & Garas, A. (2000). Three-dimensional kinematic analysis of the snatch of elite Greek weightlifters. Journal of sports sciences, 18(8), 643-652.
• Hadi, G., Akkus, H., & Harbili, E. (2012). Three-dimensional kinematic analysis of the snatch technique for lifting different barbell weights. J Strength Cond Res, 26(6), 1568-1576. doi:10.1519/JSC.0b013e318231abe9
• Haff, G. G., Whitley, A., McCoy, L. B., O'Bryant, H. S., Kilgore, J. L., Haff, E. E. Stone, M. H. (2003). Effects of different set configurations on barbell velocity and displacement during a clean pull. J Strength Cond Res, 17(1), 95-103.
• Ho, L. K., Lorenzen, C., Wilson, C. J., Saunders, J. E., & Williams, M. D. (2014). Reviewing current knowledge in snatch performance and technique: the need for future directions in applied research. The Journal of Strength & Conditioning Research, 28(2), 574-586.
• Hori, N., Newton, R. U., Nosaka, K., & McGuigan, M. R. (2006). Comparison of Different Methods of Determining Power Output in Weightlifting Exercises. Strength & Conditioning Journal, 28(2), 34-40.
• Jennings, C. L., Viljoen, W., Durandt, J., & Lambert, M. I. (2005). The reliability of the FitroDyne as a measure of muscle power. Journal of Strength and Conditioning Research, 19(4), 859.
• Musser, L. J., Garhammer, J., Rozenek, R., Crussemeyer, J. A., & Vargas, E. M. (2014). Anthropometry and barbell trajectory in the snatch lift for elite women weightlifters. The Journal of Strength & Conditioning Research, 28(6), 1636-1648.
• Pennington, J., Laubach, L., De Marco, G., & Linderman, J. (2010). Determining the optimal load for maximal power output for the power clean and snatch in collegiate male football players. Journal of Exercise Physiology Online, 13(2), 10-20.
• Reiser, F., & Cioroslan, D. (1995). Comparative biomechanical analysis of snatch technique in competition. Weightlifting USA, 13(3), 4-7.
• Sato, K., Fleschler, P., & Sands, W. (2009). Barbell acceleration analysis on various intensities of weightlifting. Paper presented at the ISBS-Conference Proceedings Archive.
• Sato, K., Sands, W. A., & Stone, M. H. (2012). The reliability of accelerometry to measure weightlifting performance. Sports Biomech, 11(4), 524-531. doi:10.1080/14763141.2012.724703
• Storey, A., & Smith, H. K. (2012). Unique aspects of competitive weightlifting: performance, training and physiology. Sports Med, 42(9), 769-790. doi:10.2165/11633000-000000000-00000