Araştırma Makalesi
BibTex RIS Kaynak Göster

On the Magnus Rotating Roll Stabilizer; Numerical and Experimental Studies

Yıl 2022, Sayı: 22, 37 - 68, 18.10.2022

Öz

Magnus rotating roll stabilizer is a roll reduction device that it generates lifting force installed at the bilge of ship hull as an alternative of anti- rolling system. In this study, hydrodynamic characteristics in terms of a ship’s roll-heave motions in a regular beam sea and anti-rolling effects at low/medium speed in the varied rotation speeds are investigated in details. For practical purposes, the calculation model of the anti-rolling force is established with the vertical velocity components caused by ship roll motion into consideration. Magnus lift force produced by the rotating cylinders in the fluid field were calculated by the numerical simulation and towing experiment. The simulation results for two-dimensional rotating cylinders and three-dimensional ship-rotor cases show that Magnus rotating roll stabilizer is more suitable and effective with high performance for ship roll stabilization at low/medium speed.

Destekleyen Kurum

Tübitak

Proje Numarası

119M665

Kaynakça

  • Referans 1 [1] Perez, T., Blanke, M., 2012. Ship roll damping control. Annu. Rev. Control 36, 129–147.
  • Referans 2 L. H. Liang, M. X. Sun, S. T. Zhang, et al, “Control system design of anti-rolling tank swing bench using BP neural network PID based on LabVIEW,” International Journal of Smart Home, vol. 9, no. 6, pp. 1-10, 2015.
  • Referans 3 [3] S.T. Zhang, L. H. Liang and J. F. Wang, “Analysis of real time stabilization effect and parameter optimization of fin stabilizer,” IEEE Int. Conf. Mechatronics Autom., China, pp. 1103-1108, August 2012.
  • Referans 4 [4] F. Wang, H. Z. Jin, Z. G. Qi, “Modeling for active fin stabilizers at zero speed,” Ocean Engineering, vol. 36, pp. 1425-1437, August 2009
  • Referans 5 [5] Liang, L., Zhao, P., Zhang, S., 2016. Research on hydrodynamic characteristics of magnus rotor wing at medium/low speed. In: Proceedings of IEEE International Conference on Mechatronics and Automation, pp. 539–544.
Yıl 2022, Sayı: 22, 37 - 68, 18.10.2022

Öz

Proje Numarası

119M665

Kaynakça

  • Referans 1 [1] Perez, T., Blanke, M., 2012. Ship roll damping control. Annu. Rev. Control 36, 129–147.
  • Referans 2 L. H. Liang, M. X. Sun, S. T. Zhang, et al, “Control system design of anti-rolling tank swing bench using BP neural network PID based on LabVIEW,” International Journal of Smart Home, vol. 9, no. 6, pp. 1-10, 2015.
  • Referans 3 [3] S.T. Zhang, L. H. Liang and J. F. Wang, “Analysis of real time stabilization effect and parameter optimization of fin stabilizer,” IEEE Int. Conf. Mechatronics Autom., China, pp. 1103-1108, August 2012.
  • Referans 4 [4] F. Wang, H. Z. Jin, Z. G. Qi, “Modeling for active fin stabilizers at zero speed,” Ocean Engineering, vol. 36, pp. 1425-1437, August 2009
  • Referans 5 [5] Liang, L., Zhao, P., Zhang, S., 2016. Research on hydrodynamic characteristics of magnus rotor wing at medium/low speed. In: Proceedings of IEEE International Conference on Mechatronics and Automation, pp. 539–544.
Toplam 5 adet kaynakça vardır.

Ayrıntılar

Birincil Dil İngilizce
Konular Deniz Mühendisliği
Bölüm Araştırma Makaleleri
Yazarlar

Hakan Akyıldız 0000-0002-8554-2559

Özden İlkan Aydın 0000-0003-2437-9054

Proje Numarası 119M665
Yayımlanma Tarihi 18 Ekim 2022
Gönderilme Tarihi 20 Ağustos 2022
Yayımlandığı Sayı Yıl 2022 Sayı: 22

Kaynak Göster

APA Akyıldız, H., & Aydın, Ö. İ. (2022). On the Magnus Rotating Roll Stabilizer; Numerical and Experimental Studies. GİDB Dergi(22), 37-68.

88x31.png

Bu site ve içerisinde yayınlanan eserler Creative Commons AI 4.0 Uluslararası Lisansı ile lisanslanmıştır.
GiDB|DERGi, İstanbul Teknik Üniversitesi tarafından yayınlanmaktadır.