EFFECT OF DESIGN ON THE DECISION OF CONSUMERS TO REUSE PACKAGING IN REDUCTION OF SOLID WASTE

Öz

Solid waste caused by single-use plastic packaging is a severe global problem due to the increasing population and consequent consumption. Remarkably, most of the packaging produced from plastic turns into a large amount of solid waste. Plastic solid wastes pollute the soil, water, and air necessary for the life of all living things. Plastic products, like metal and glass, cannot be recycled continuously. This study aims to reveal the factors and benefits that enable consumers to reuse the packaging after using a product. In addition, the importance of international cooperation in increasing consumers' environmental awareness, teaching the importance of living in a clean and healthy environment, the competence of recycling centers in recycling plastic packaging, and the preparation and implementation of environmental laws are mentioned. The most effective and economical way to prevent the solid waste problem caused by plastic packaging at the very beginning is to ensure packaging reuse with a convenient packaging design. In addition, increasing the knowledge and experience of consumers in the reuse of plastic packaging, improving society's values that the packaging is not garbage, and informing about how the packaging can be reused in packaging design will increase the number and duration of packaging reuse. In addition, businesses should be given financial support by governments to reuse their packaging and should be encouraged to prioritize returnable glass packaging. However, companies should be held responsible when they produce solid waste with their packaging, and various judicial and administrative penalties and sanctions should be applied. In order to increase environmental awareness, artists should create their works from used packaging by addressing the environmental pollution caused by packaging in their artworks.

Anahtar Kelimeler

• Packaging design
• packaging reuse
• single-use plastic packaging
• plastic solid waste
• environmental awareness
• sustainable consumption.

KATI ATIKLARIN AZALTILMASINDA TASARIMIN TÜKETİCİLERİN AMBALAJI YENİDEN KULLANMASI KARARINA ETKİSİ

Öz

Artan nüfus ve buna bağlı olarak artan tüketim sebebiyle tek kullanımlık plastik ambalajların sebep olduğu katı atıklar ciddi bir küresel sorun oluşturmaktadır. Özellikle plastikten üretilen ambalajların çoğu büyük miktarda katı atığa dönüşmektedir. Plastik katı atıklar tüm canlıların yaşamları için gerekli olan toprağı, suyu ve havayı kirletmektedir. Plastik ürünler metal ve cam gibi sürekli geri dönüştürülememektedir. Bu çalışmada tüketicilerin bir ürünü kullandıktan sonra ambalajın tekrar kullanılmasını sağlayan etkenleri ve faydalarını ortaya araştırılmaktır. Ayrıca, tüketicilerin çevreye duyarlılıklarının arttırılması, temiz ve sağlıklı bir çevrede yaşamanın öneminin öğretilmesi, geri dönüşüm merkezlerinin plastik ambalajları geri dönüşümdeki yeterlilikleri ve çevreci yasaların hazırlanıp uygulanmasında uluslararası işbirliğinin önemine değinilmektedir. Plastik ambalajların neden olduğu katı atık problemini işin en başında önlemenin en etkili ve ekonomik yolu kullanışlı ambalaj tasarımıyla ambalajın yeniden kullanımının sağlanmasıyla yapılır. Buna ek olarak plastik ambalajların tekrar kullanılmasında tüketicilerin bilgi ve tecrübelerinin arttırılması, ambalajların çöp olmadığı konusunda toplumun değerlerinin geliştirilmesi ve ambalaj tasarımında ambalajın nasıl yeniden kullanılabileceği konusunda bilgilendirmeler ambalajın yeniden kullanım sayı ve süresini arttıracaktır. Ayrıca, işletmelere ambalajlarını yeniden kullanma konusunda devletler tarafından finansal destekler verilmeli ve depozitolu cam ambalajlara öncelik vermeleri için teşvik edilmelidirler. Bununla birlikte, işletmelere ambalajlarıyla katı atık ürettiklerinde sorumlu tutularak çeşitli yaptırımlar uygulanmalıdır. Çevreci farkındalığın arttırılmasında sanatçılar eserlerinde plastik ambalajların neden olduğu çevre kirliliğini ele alarak eserlerini kullanılmış ambalajlardan üretmektedirler.

Anahtar Kelimeler

• Ambalaj tasarımı
• ambalajın yeniden kullanımı
• tek kullanımlık plastik ambalaj
• plastik katı atık
• çevre bilinci
• sürdürülebilir tüketim.

Kaynakça

1. Art of Recycle (2021, June 2). Building a Strong Community, Art of Recycle. https://artofrecycle.org/
2. Azzi, A., Battini D., Persona A. and Sgarbossa, F. (2012). Packaging Design: General framework and research agenda, Packaging Technology and Science, 25(8), 435-456.
3. Babader, A., Ren, J., Jones, K. O. and Wang, J. (2016). A system dynamics approach for enhancing social behaviors regarding the reuse of packaging, Expert Systems with Applications, 46, 417-425.
4. Barr, S., Gilg, A. W. and Ford, N. J. (2001). Differences between Household Waste Reduction, Reuse and Recycling Behaviour: A Study of Reported Behaviours, Intentions and Explanatory Variables, Environmental & Waste Management, 4(2), 69-82.
5. Birdy Official (2021, March 8). How to Make a Bird Water Feeder | DIY Homemade Plastic Bottle Bird Water Feeder, YouTube. https://www.youtube.com/watch?v=q6EitavSRNg
6. BCCL (2021, May 30). Plastic Monster' surfaces on Mumbai shore, Mumbai Mirror. https://mumbaimirror.indiatimes.com/photos/photos-plastic-monster-surfaces-on-mumbai-shore/photostory/68184525.cms.
7. Bradley, C. G. and Corsini, L. (2023) A literature review and analytical framework of the sustainability of reusable packaging, Sustainable Production and Consumption, 37, 126-141.
8. Chand, S. (2021, may 16). 5 Basic Functions of Packaging in Marketing a Product, Your Article Library, The Next Generation Library. https://www.yourarticlelibrary.com/marketing/5-basic-functions-of-packaging-in-marketing-a-product/22204

9. Clapp, J. and Swanston, L. (2009) Doing away with plastic shopping bags: international patterns of norm emergence and policy implementation, Environmental Politics, 18(3) 315-332.
10. Coelho, P. M., Corona, B., ten Klooster, R. and Worrell, E. (2020) Sustainability of reusable packaging–Current situation and trends. Resources, Conservation & Recycling: X, 6, 100037, 2020, 1-11.
11. Dajian, Z. (2004). Towards a Closed-Loop Materials Economy, Chinese Journal of Population Resources and Environment, 2(1), 9-12.
12. Danigelis, A. (2021, February 10). Beverage Giants Bank on Packaging-Free Bottle Filling Stations, Environmental Leader. https://www.environmentalleader.com/2019/05/beverage-bottle-filling-stations/
13. Ellen McArthur Foundation. (2021, January 2) Reuse - rethinking packaging, Ellen McArthur Foundation. https://www.ellenmacarthurfoundation.org/assets/downloads/Reuse.pdf
14. Eurostat Statistics Explained. (2021, June 2). Packaging waste statistics, Packaging waste generated, recovered and recycled, EU-27, 2008-2018. https://ec.europa.eu/eurostat/statistics-explained/index.php?title=Packaging_waste_statistics
15. Fatima, S. (2017). Sustainable construction of bottle wall and binding material, International Research Journal of Engineering and Technology (IRJET), 4(4), 2079-2080.
16. Fibre-Reinforced Plastic Technologies (2021, August 31). Global Chemical Snapshot, Fibre-Reinforced Plastic Technologies, Database: Business Source Ultimate. https://straitsresearch.com/report/fiber-reinforced-plastics-recycling-market
17. Green Dream Project. (2021, September 9). We Built THIS out of DIRT and PLASTIC BAGS | Earthbag Outdoor Bar Build from Start to Finish, Youtube. https://www.youtube.com/watch?v=7BEqCGg02HM
18. Greenwood, S. C., Walker, S., Baird, H. M., Parsons, R., Mehl, S, Webb, T. L., Slark, A. T., Ryan, A. J., and Rothman, R. H. (2021) Many happy returns: combining insights from the environmental and behavioral sciences to understand what is required to make reusable packaging mainstream. Sustain. Prod. Consum. 27, 1688–1702.
19. Grisé, C. (2021, February 15). The Truth About Recycling, New York Times Upfront, 10-13.
20. https://junior.scholastic.com/issues/2021-22/110121/the-truth-about-recycling-plastic.html?language=english#1170L
21. Hahladakis, J. N. and Iacovidou, E. (2018). Closing the loop on plastic packaging materials: What is quality and how does it affect their circularity?, Science of the Total Environment, 630, 1394-1400.
22. Hammer, J., Kraak, M.H.S. and Parsons, J.R. (2012). Plastics in the marine environment: the dark side of a modern gift, Reviews of Environmental Contamination and Toxicology, National Library of Medicine, National Center for Biotechnology Information, 1-44.
23. Heskett, J. (2017). Tasarım, Ankara: Dost Kitabevi.
24. Homegrown Staff. (2019, May 25). All You Need to Know about the 'Plastic Monster' Displayed at Bandra-Worli Sea Link, Homegrown. https://homegrown.co.in/article/803495/all-you-need-to-now-about-the-plastic-monster-displayed-at-bandra-worli-sea-link
25. Ignacia, G. (2019, June 1). Artists Recycling their way to Large-Scale Installations. the Artling. https://theartling.com/en/artzine/recycled-art/.
26. IQAir (2023, April 28). World's most polluted countries & regions (historical data 2018-2022). https://www.iqair.com/world-most-polluted-countries
27. Karn, S. K. (2021). Discard Plastic Burning: A Serious Risk Factor in Dehradun, India, International Journal of Health and Life Sciences, 7(2), 1-5.
28. Knaster, M. (2019, September 22). Lots of Stuff and Artmaking, Mirka Art. https://mirkaart.com/exploringtheheartofit/2019/9/16/lots-of-stuff-and-artmaking.
29. Langley, J., Turner, N. and Yoxall, A. (2011). Attributes of packaging and Influences on waste, Packaging Technology and Science, 24(3), 161-175.
30. Lemos Junior, W. J. F., Amaral dos Reis, L. P., Oliveira, V. S., Lopes, L. O. and Pereira, K. S. (2019). Reuse of refillable PET packaging: Approaches to safety and quality in soft drink processing, Food Control, 100, 329-334.
31. Lestari, P. and Trihadiningrum, Y. (2019). The impact of improper solid waste management to plastic pollution in Indonesian coast and marine environment, Marine Pollution Bulletin, 149, 1-9.
32. Lindh, H., Olsson, A. and Williams, H. (2016) Consumer perceptions of food packaging: contributing to or counteracting environmentally sustainable development?: consumer perceptions of food packaging. Packaging Technology and Science, 29 (1), 3–23.
33. Nguyen, A. T., Parker, L., Brennan, L. and Lockrey, S. (2020). A consumer definition of eco-friendly packaging, Journal of Cleaner Production, 252, 1-11.
34. Özek, E. U. (2016). Ambalaj Sektörü & TRB1, Fırat Kalkınma Ajansı,” fka.gov.tr, Retrieved 02.03.2021, https://fka.gov.tr/sharepoint/userfiles/Icerik_Dosya_Ekleri/FKA_ARASTIRMA_RAPORLARI/AMBALAJ%20SEKT%C3%96R%C3%9C%20VE%20TRB1.pdf.
35. Petljak, K., Naletina, D. and Bilogrević, K. (2019). Considering Ecologically Sustainable Packaging During Decision-Making While Buying Food Products, Economics of Agriculture, 66(1), 107-126.
36. Rigamonti, L., Biganzoli, L. and Grosso, M. (2019). Packaging reuse: a starting point for its quantification, Journal of Material Cycles and Waste Management, 21, 35-43.
37. Seattle Recycled Arts (2021, August 8) What We Do, Since 2015, We have led the effort to create interactive events to help promote Zero Waste through Art, Seattle Recycled Arts. https://www.seattlerecycledarts.com/what-we-do
38. Starbucks. (2021, May 2). Cup and materials, Starbucks, https://www.starbucks.com/responsibility/environment/cups-and-materials
39. Šuškevičė, V. and Kruopienė, J. (2021). Improvement of Packaging Circularity through the Application of Reusable Beverage Cup Reuse Models at Outdoor Festivals and Events, Sustainability, 13(247), 1-18.
40. Sykes, T. (2019, April 2). Recycle or reuse? Will Loop redefine the circular economy? Packaging Europe. https://packagingeurope.com/reuse-vs-recycle-loop-radicalvision-redefine-circular-economy/
41. Thaitrick. (2017, March 3). 38 Creative Ideas with Plastic Bottles, Youtube, https://www.youtube.com/watch?v=xEAOvFG1AmM.
42. The Observers. (2016). How Bangladeshi inventors are making eco-friendly air conditioners from plastic bottles, France24, Retrieved 30.04.2021, https://observers.france24.com/en/20160602-bangladesh-air-conditioner-plastic-bottles-technology.
43. Turner, L. (2016). Small things matter too: Simple reuse DIY projects, Technology for a Sustainable Future, 134, Energy Efficiency Special (January–March 2016), 83-85.
44. Turner, K. (2012, April 14). 20 Inspirational Designs Made from Cardboard, Materials Design Ideas Ponoko. https://www.ponoko.com/blog/design-ideas/20-inpirational-designs-made-from-cardboard/
45. Uğurlu Akbaş, Ö. (2021) “Dijital Halkla İlişkilerde Hikâye Anlatıcılığı: Odeobank ‘Eşit Masallar’ Proje Değerlendirilmesi”, Ed. Yeliz Kuşay, Dijital Dünyada Halkla İlişkilerin Dönüşümü, Eğitim Yayınları, Konya, 333-365.
46. United Nations Environment Programme. (2018, October 17) Single-use Plastics, A Roadmap for Sustainability, United Nations Environment Programme and International Environment Technology Centre (IETC), Economy Division of UNEP. https://www.unep.org/resources/report/single-use-plastics-roadmap-sustainability
47. Wells, L. E., Farley, H. and Armstrong, G. A. (2007). The importance of packaging design for own-label food brands," International Journal of Retail & Distribution Management, 35(9), 677-690.
48. Wiener-Bronner, D. (2019). Coca-Cola will sell Dasani in aluminum cans and bottles, CNN, https://edition.cnn.com/2019/08/13/business/coca-cola-dasanicans/index.html.
49. Winn, P. (2016). Five countries dump more plastic into the oceans than the rest of the world, The World/Environment-Global Post, Public Radio Int. https://www.pri.org/stories/2016-01-13/5-countriesdump-more-plastic-oceans-rest-world-combined
50. Wohner, B., Pauer, E., Heinrich, V. and Tacker, M. (2019). Packaging-Related Food Losses and Waste: An Overview of Drivers and Issues, Sustainability, 11(264), 1-15.
51. Yam, K. L. and Lee, D. S. (2013). Emerging Food Packaging Technologies, International Journal of Dairy Technologies, 66(2), 301-302.
52. 5-Minute Crafts Family. (2019). 26 Plastic Bottle Ideas, YouTube, https://www.youtube.com/watch?v=_pGhJTmPWOA