Investigation of effects of boron additives on performance of cam mechanisms

Öz

The use of additives in the contacting surfaces is essential for the formation of a thin lubricant film, which separates the moving surfaces from each other. Boron compounds, in particular, are very helpful for the sliding surfaces. The aim of the investigation is to clarify how the boron additives influence the lubricating ability of the engine oil using in the sliding contact of the cam-follower. In this study, the considerable results in the tests of engine oil with boron compounds and with base oil are obtained. And also, the influences of the minimize interface friction has been observed under different test conditions.

Anahtar Kelimeler

• Oil Additives
• Internal Combustion Engine
• Lubricant
• Boron Compounds
• Friction Force
• Friction Coefficient
• Boric Acid
• Boron Nitride

Kaynakça

1. H. Hirani, Mixed Lubrication. In Fundamentals of Engineering Tribology with Applications (pp. 326-370). Cambridge: Cambridge University Press. 2016.
2. H. Bas and Y. E. Karabacak, “Investigation of the Effects of Boron Additives on the Performance of Engine Oil,” Tribology Transactions, 57:4, 740-748, 2014.
3. T. Bartels, “Lubricants, 5. Gear Lubrication Oils”, Ullmann's Encyclopedia of Industrial Chemistry, ISBN: 9783527306732, 2011.
4. J. M. Herdan, “Friction modifiers in engine and gear oils”, Lubrication. Science, 12, 3, pp. 265-276, 2000.
5. F. U. Shah, “Boron Compounds as Additives to Lubricants, Synthesis, Characterization and Tribological, Optimization”, Lulea University of technology, 2009.
6. B. A. Baldwin, “Relative antiwear efficiency of boron and sulphur surface species”, Wear, 45, 3, pp. 345-353, 1977.
7. Y. Kimura, T. Wakabayashi, K. Okada, T. Wada, and H. Nishikawa, “Boron nitride as a lubricant additive”, Wear, 232, 199, pp. 206.56, 1999.
8. Erdemir, “Advances in Boron-Based Lubricants and Lubrication Additives”, IV International Boron Symposium, October Eskisehir, Turkey, 2009.

9. F. Chinas-Castillo and H. A. Spikes, “Mechanism of action of colloidal solid dispersions”, J. Tribology-Trans., ASME, 125, 3 pp. 552-557, 2003.
10. P. J. Pacholke and K. M. Marshek, “Improved worm gear performance with colloidal molybdenum-disulfide containing lubricants”, Lubr. Eng., 43, pp. 623-628, 1987.
11. R. S. Barnett, “Molybdenum disulfide as an additive for lubricating greases”, Lubr. Eng., 33, 308-313, 1977.
12. Erdemir, “Solid lubricants and self-lubricating films, in “Handbook of Modern Tribology,” B. Bhushan, ed., CRC Press, Boco Raton, FL, pp. 787-818, 2001.
13. G.W Rowe, “Some observations on the frictional behaviour of boron nitride and of graphite”, Wear, 3, 4, pp. 274–285, 1960.
14. J. M. Martin, T. LeMogne, C. Chassagnette, and M. N. Gardos, “Friction of hexagonal boron nitride in various environments”, Tribol. Trans., 35, 463-472, 1992.
15. C. C. Klepper, J. M. Williams, J. J. J. Truhan, J. Qu, L. Riester, R. C. Hazelton, J. J Moschella, P. J. Blau, J. P. Anderson, O. O. Popoola and M. D. Keitz ”Tribomechanical properties of thin boron coatings deposited on polished cobalt alloy surfaces for orthopedic applications”, Thin Solid Films, 516, 10, pp. 3070–3080, 2008.
16. M. Lovell, C. F. Higgs, P. Deshmukh and A. Moble, “Increasing formability in sheet metal stamping operations using environmentally friendly lubricants”, J. Mat. Pro.Tech. 177, pp. 87-90, 2006.
17. J. H. Wu, B. S. Phillips, W. Jiang, J. H. Sanders, J. S. Zabinski, and A. P. Malshe, “Bio-inspired surface engineering and tribology of MoS2 overcoated cBN–TiN composite coating”, Wear, 261, pp. 592–599, 2006.
18. H. U. Jamali, A. Al-Hamood, O.I. Abdullah, A. Senatore and J. Schlattmann, “Lubrication Analyses of Cam and Flat-Faced Follower,” Lubricant, 7, 31, 2019.
19. C. M. Taylor, “Valve train lubrication analysis. Seventeenth Leeds-Lyon Symposium on Tribology—vehicle tribology, Tribology Series 18, pp. 119–131 (Elsevier, Oxford). 1991.
20. H. A. Spikes, V. Anghel and R. Glovnea, “Measurement of the Rheology of Lubricant Films Within Elastohydrodynamic Contacts” Tribology Letters, 2014.
21. H. Bas, Ph.D. Thesis, ‘‘Investigation of Friction Behavior of Additive Engine Oils on Cam Mechanisms,”Karadeniz Technical University Institute of Natural and Applied Sciences, 2001.