Analysis and optimization of interior permanent magnet synchronous motor for electric vehicle applications using ANSYS Motor-CAD

Yıl 2023, Cilt: 12 Sayı: 3, 105 - 120, 30.09.2023

Doğukan Ayhan

https://doi.org/10.18245/ijaet.1247462

Öz

The Permanent Magnet Synchronous Motor (PMSM) has the capability to high torque to current ratio, high power to weight ratio, high efficiency and stability. Due to the above positive points, PMSM is extensively employed in recent variable speed AC drives, particularly in electric vehicle applications. The electric vehicle is convenient for the city traffic without toxic gas emissions with low noise. PMSM became at the top of AC motor types due to the positive features written in the previous lines. However, it has two major drawbacks i.e. high cost and small speed range but it can be controlled and exceed to the small speed range with some control methods. A radial flux inner rotor PMSM architecture for electric vehicle application is presented in the project. The Interior Permanent Magnet Synchronous Motor (IPMSM) of the electric vehicle Leaf model, which was first produced by Nissan company in 2012, will be analyzed with ANSYS Motor-CAD and then the analysis results will be compared with the theoretical results and finally will be optimized in the project. The paper will provide insights about various change of parameters and their effects to the other parameters.

Anahtar Kelimeler

Analysis, Optimization, Finite Element Method or Analysis, Electric Vehicle, Radial flux, ANSYS Motor-CAD, Permanent Magnet Synchronous Motor, Interior Permanent Synchronous Motor

Kaynakça

• Gieras, J.F."Permanent Magnet Motor Technology: Design and Applications", Taylor&Francis, 26/08/2009.
• Paplicki, Piotr & Piotuch, Rafał. "Improved Control System of PM Machine with Extended Field Control Capability for EV Drive", Springer, Cham, AISC,volume 317, 1-2, 2015.
• A. Loganayaki and R. B. Kumar, "Permanent Magnet Synchronous Motor for Electric Vehicle Applications," 2019 5th International Conference on Advanced Computing & Communication Systems (ICACCS), 1064-1069, 2019.
• Bianchi, N. "Electrical Machine Analysis Using Finite Elements”, Taylor&Francis, 31/01/2017.
• Fleisch, Daniel. "A Student's Guide to Maxwell's Equations", Cambridge University Press, 2008.
• Shinde, Prajakta Shankar, A. G. Thosar, and Punit Lalji Ratnani. "Design of permanent magnet synchronous motor." Int. J. Sci. Eng. Res 6.1, 2015.
• https://www.arnoldmagnetics.com/ products/neodymium-iron-boron-magnets/ , 27/ 04 2023.
• John M. Miller,” Electric Motor R&D DOE Hydrogen and Fuel Cells Program and Vehicle Technologies Program Annual Merit Review and Peer Evaluation Meeting”, Oak Ridge National Laboratory, 15/05 2013.
• Žarko, D., Ban, D. i Klarić, R. " Finite Element Approach to Calculation of Parameters of an Interior Permanent Magnet Motor”, 119 International Journal of Automotive Engineering and Technologies, 105-119, Automatika, 46, 3-4, 113-122, 2005
• Kondo, M. " Parameter measurements for permanent magnet synchronous machines" IEEJ Trans Elec Electronic Engineering, 2, 109-117, 2007.
• Sato, Y., Ishikawa, S., Okubo, T., Abe, M. et al., "Development of High Response Motor and Inverter System for the Nissan LEAF Electric Vehicle," SAE Technical Paper, 2011.
• Laskaris, Knstantinos & Haniotis, A. & Kladas, A. " High performance traction motor design and construction for small passenger electric car", 19th International Conference on Electrical Machines,11614819,1-6,2010.
• H. Chen and C. H. T. Lee, "Parametric Sensitivity Analysis and Design Optimization of an Interior Permanent Magnet Synchronous Motor", IEEE Access, 7,159918-159929, 2019.