Continuous and Discontinuous Contact Problems of a Functionally Graded Layer

Abstract

In this study, the continuous and discontinuous contact problem of a functionally graded (FG) layer resting on a rigid foundation is considered. The top of the FG layer is subjected to normal tractions over a finite segment. The graded layer is modeled as a non-homogenous medium with a constant Poisson’ ratio and exponentially varying shear modules and density. For continuous contact, the problem is solved analytically using plane elasticity and integral transform techniques. The critical load that causes first separation for various material properties is investigated.  The problem is reduced to a singular integral equation using plane elasticity and integral transform techniques in case of discontinuous contact. Obtained singular integral equation is solved numerically using Gauss-Jacobi integral formulation and an iterative scheme is employed to obtain the correct separation distance. The separation distance between the FG layer and the foundation is analyzed. The results are shown in tables and figures. It is seen that decreasing stiffness and density at the top of the layer results an increment  in critical load and the lowest pressure occurs on the symmetry axis in case of continuous contact. In addition, the separation distance increases with decreasing stiffness and density at the top of the layer in case of discontinuous contact.

Keywords

• Gauss-Jacobi,Functionally graded layer,Discontinuous contact

Kaynakça

1. [1] M.B. Civelek, F. Erdogan, “Frictionless Contact Problem for an Elastic Layer under Gravity”, Journal of Applied Mechanics-Transactions of the Asme 42 (1975) 136-140.
2. [2] A. Birinci, R. Erdol, “A frictionless contact problem for two elastic layers supported by a Winkler foundation”, Structural Engineering and Mechanics 15 (2003) 331-344.
3. [3] E. Oner, A. Birinci, “Continuous Contact Problem for Two Elastic Layers Resting on an Elastic Half-Infinite Plane”, Journal of Mechanics of Materials and Structures 9 (2014) 105-119. DOI: 10.2140/jomms.2014.9.105.
4. [4] S. El-Borgi, R. Abdelmoula, L. Keer, “A receding contact plane problem between a functionally graded layer and a homogeneous substrate”, International Journal of Solids and Structures 43 (2006) 658-674. DOI: 10.1016/j.ijsolstr.2005.04.017.
5. [5] J. Yang, L.L. Ke, “Two-dimensional contact problem for a coating-graded layer-substrate structure under a rigid cylindrical punch”, International Journal of Mechanical Sciences 50 (2008) 985-994. DOI: 10.1016/j.ijmecsci.2008.03.002.
6. [6] M. Turan, G. Adiyaman, V. Kahya, A. Birinci, “Axisymmetric analysis of a functionally graded layer resting on elastic substrate”, Structural Engineering and Mechanics 58 (2016) 423-442. DOI: 10.12989/sem.2016.58.3.423.