Dynamic and quantitative Sensitivity analysis on the efficient development of tight oil

Öz

The aim of this paper is to present dynamic and quantitative sensitivity analysis for the tight oil development with horizontal fracturing well. And a set of correlations predict the oil production and effective swept scope are built   correspondingly.

In this paper, a group of orthogonal schemes were designed and simulated with the CMG IMEX Simulator. And 11 parameters are filtered after extensive investigation of typical characteristics of tight oil in China and abroad. The parameters include reservoir characteristics, threshold pressure gradient and stress sensitive effect, fracturing parameters etc. And analysing each five years’ simulation results including cumulative production, oil recovery and effective flow area.

The analysis result shows that the initial reservoir pressure and well bottom hole pressure, which decides whether the energy is sufficient to drive oil flow, is the most significant factor to influence the tight oil cumulative production. Secondly, reservoir thickness and porosity influence whether the reservoir oil is rich. However, for the oil recovery, the contribution of fracturing is more essential, which directly determines whether it has industrial oil production. In addition, threshold pressure gradient and stress sensitivity, the distinct seepage characteristics between tight oil and traditional reservoirs, will further exacerbate the ultra-low permeability and seepage process. The most immediate effect is that the swept scope range becomes smaller. In addition, a series mathematical model are also established for the development effect estimation through the use of multivariate regression, Through data validation, the quantitative model error ranges 5.45% from 9.29%.

Anahtar Kelimeler

• tight oil,sensitivity analysis,threshold pressure gradient,stress sensitivity

Kaynakça

1. Bai, B., Salehi, S., Nygaard, R., & Aladasani, A. (2014, February 25). Optimizing the Development of Tight Oil Formations. Society of Petroleum Engineers.SPE-167742-MS. http://dx.doi.org/10.2118/167742-MS
2. Boczar T, Franz P. The Application of the Correlative Analysis and the Regression Function for Determining Correlations of the Measurement Results of Acoustic Emission Generated by Partial Discharges[J]. Acta Physica Polonica A, 2009, 116:281_284.http:/dx.doi.org/10.12693/APhysPolA.116.281
3. Baig, M. T., Alnuaim, S., & Rammay, M. H. (2015, June 4). Productivity Increase Estimation for Multi Stage Fracturing in Horizontal Wells for Tight Oil Reservoirs. Society of Petroleum Engineers. SPE-178030-MS. http://dx.doi.org/10.2118/178030-MS
4. Baoquan, Z., Linsong, C., & Fei, H. (2010, January 1). Experiment and Mechanism Analysis on Threshold Pressure Gradient with Different Fluids. Society of Petroleum Engineers. SPE-140678-MS. http://dx.doi.org/10.2118/140678-MS
5. Chen, H.-Y., & Teufel, L. W. (2001, January 1). Understanding the Effects of Reservoir and Operating Parameters on Tight-Gas Production Decline. Society of Petroleum Engineers. SPE-71066-MS. http://dx.doi.org/10.2118/71066-MS
6. CMG. IMEX User’s Guide, Computer Modeling Group Ltd, 2012.
7. Cui, Q., & Abass, H.H. (2016, May 5). Experimental Study of Permeability Decline in Tight Formations During Long-Term Depletion. Society of Petroleum Engineers.SPE-180257-MS. http://dx.doi.org/10.2118/180257-MS
8. Experimental design and Design-Expert, SPSS applications.

9. Lei, Q., Xiong, W., Yuang, J., Cui, Y., & Wu, Y.-S. (2007, January 1). Analysis of Stress Sensitivity and Its Influence on Oil Production From Tight Reservoirs. Society of Petroleum Engineers. SPE-111148-MS. http://dx.doi.org/10.2118/111148-MS
10. Li, X., Wei, H., Chen, B., Liu, X., Wang, W., & Zhao, X. (2008, January 1). Multi-Stage Fracturing Stimulations Improve Well Performance in Tight Oil Reservoirs of the Chang qing Oilfield. International Petroleum Technology Conference. IPTC-12303-MS. http://dx.doi.org/10.2523/IPTC-12303-MS
11. Lin, M., Chen, S., Ding, W., Chen, Z. (John), & Xu, J. (2015, May 1). Effect of Fracture Geometry on Well Production in Hydraulic-Fractured Tight Oil Reservoirs. Society of Petroleum Engineers. SPE-167761-PA. http://dx.doi.org/10.2118/167761-PA
12. Roussel, N. P., & Sharma, M. M. (2010, January 1). Optimizing Fracture Spacing and Sequencing in Horizontal Well Fracturing. Society of Petroleum Engineers.SPE-127986-MS. http://dx.doi.org/10.2118/127986-MS
13. Sigal, R. F. (2002, March 1). The Pressure Dependence Of Permeability. Society of Petrophysicists and Well-Log Analysts.
14. Thomas, L. K., Katz, D. L., & Tek, M. R. (1968, June 1). Threshold Pressure Phenomena in Porous Media. Society of Petroleum Engineers. SPE-1816-PA. http://dx.doi.org/10.2118/1816-PA
15. Wei, Y., et al., Determination of dynamic reserves of fractured-horizontal wells in tight oil reservoirs by multi-region material balance method. Petroleum Exploration & Development, 2016. http://dx.doi.org/10.1016/S1876-3804(16)30057-X
16. Benyahia F, Nacer A, Moulai H, et al. Discharge Currents Discrimination Technique Based on Multi-Linear Regression Line and Artificial Neural Networks for Power Transformers Diagnosis[J]. Acta Physica Polonica A, 2013, 123(2): 250-253.http://dx.doi.org/10.12693/APhysPolA.123.250
17. Haranczyk H, Wojcik A. Liquid Phase Contained in Porous Rock as Observed by Proton Magnetic Relaxation[J]. Acta Physica Polonica A, 2000: 153-161. DOI:10.12693/APhysPolA.98.153