Effect of Change in Radial Clearance on Pressure Variation of Fluid in Hydrodynamic Journal Bearing

Abstract

This work entails the parametric study of the effect of the change in bearing radial clearance with pressure variation of the fluid (lubricant) in a hydrodynamic journal bearing was carried out. The classical Reynolds Equation was used to represent the pressure behaviour in the bearing. This study was carried out using the Galerkin Finite Element Method (GFEM). The result obtained shows that the pressure increases from the ambient pressure which is taken to be zero and increases significantly till 145.3737⁰. At this point, the pressure is maximum with 1.955 MPa and then drop until it gets to 180⁰ where the pressure equals the ambient pressure. Between angular displacements of 180⁰ and 360⁰ there were also pressure variations which were equal in magnitude with those between 0⁰ and 360⁰ but with different direction. From the foregoing, it is observed that as the radial clearance increases, the pressure in the bearing drops significantly. Therefore, in the design of journal bearings, the radial clearance should a high as possible to reduce the pressure in the bearing. The result obtained shows a strong positive correlation with existing result in literature.

Keywords

• Hydrodynamic lubrication,Journal bearing,weak formulation,Radial clearance,Finite Element Method

Kaynakça

1. P. Tiwari and V. Kumar. Analysis of Hydrodynamic Journal Bearing: A Review, International Journal of Engineering Research and Technolology, 1, 7, ESRSA Publications, 2012.
2. B. V. Bhandari. Design of Machine Elements, 3rd Edition, Tata Mcgraw Hill Education Private Ltd. New Delhi, India, ISBN-13: 978-0-07-068179-8, 2010.
3. S. P. Chu and E. Kay. Optimum Clearance Fits for Journal Bearings in Relation to BS 1916 and to Lubrication Theory, Wear, 27, 3, 329-343, 1974.
4. S. Sharma, D. Hargreaves and W. Scott. Journal bearing performance and metrology issues. Journal of Achievements in Materials and Manufacturing Engineering 32, 1, 98-103, 2009.
5. W. F. Ocvfik and B. G. D’ubois. Relation of Journal Bearing Performance to minimum oil film, NACA, TN 4223, 1958.
6. J. Mitsui, Y. Hori and M. Tanaka. An Experimental Investigation on the Temperature Distribution in Circular Journal Bearings, ASME Journal of Tribology 108, 4, 621- 626, 1986.
7. H. Prashad. The Effects of Viscosity and Clearance on the Performance of Hydrodynamic Journal Bearings, Tribology Transactions. 31, 2, 303-309, 1988.
8. I. Pierre and M. Fillon. Influence of Geometric Parameters and Operating Conditions on the Thermohydrodynamic Behavior of Plain Journal Bearings” Proc. of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, France, Sage publication, 214, 5, 445-457, 2000.

9. A. M. El-Kersh and W. Y. Ali. The effect of thermal expansion and elastic deformation on the performance of polyamide-copper journal bearings, KGK Kautschuk Gummi kunststoffe, 54, (9), 468-473, 2001.
10. B. A. Abass, A. A. Alwan and M. B. Hunain. An Investigation into the Performance of Counter Rotating Floating Ring Journal Under Different Working Conditions, Al-Khwarizmi Engineering Journal,3,1, 26-39, 2007.
11. A. K. Gangrade and V. M. Phalle. Effect of Clearance and Aspect Ratio On The Performance Of Water Lubricated Hydrodynamic Journal Bearing, International Journal of Global Technology. Initiatives, 5, 1, D59-D64, 2016.
12. M. Amit, R. K. Awasthi, S. S. Sarabjeet, D. Sandeep and S. Harpuneet. CFD Investigation of Clearance on Pressure Distribution and Fluid Film Thickness in Hydrodynamic Journal Bearing, International Journal of Advance Research and Innovation, Volume 4, Issue 2 571-575, 2016.
13. J. E. L. Simmsons and S. J. Dixon. Effect of load direction, preload, clearance ratio, and oil flow on the performance of a 200 mm journal pad bearing” Tribology Transactions, 37, 227-236, 1994.
14. A. C. Papadopoulos, G. Nikolakopoulos and D. Gounaris. Identification of clearances and stability analysis for a rotor-journal bearing system, Mechanism and Machine Theory, 43, 411–426, 2008.
15. L. Tian, W. J. Wang and Z. J. Peng. Effects of bearing outer clearance on the dynamic behaviours of the full floating ring bearing supported turbocharger rotor, Mechanical Systems and Signal Processing, 31, 155-175, 2012.
16. R. Fargere and P. Velex. Influence of clearances and thermal effects on the dynamic behavior of gear-hydrodynamic journal bearing systems, ASME Journal of Vibration and Acoustics, 135, 061014-1-061014-16, 2013.
17. S. B. Harpreet, P. Gobind, R. K. Awasthi, S. M. Manjeet, S. Davinder, S. Navneet, K. Vijay and E. K. Keshwer. Impact of clearance contact on the performance of hydrodynamic journal bearing system, International Journal of Advance Research and Innovation, Volume 5, 1, 110-114, 2017.
18. R. M. Mane and S. Soni. Analysis of hydrodynamic plain journal bearing. Excerpt from the proceedings of the 2013 COSMOL Conference in Bangalore.
19. G. R. Budynas and K. J. Nisbett. Shigley’s Mechanical Engineering Design, 10th Edition, McGraw- Hill Education, New York, ISBN 978-0-07-339820-4. 2015.
20. J. N. Reddy, Introduction to the Finite Element Method, Second edition, McGraw-Hill series in Mechanical Engineering. 1993.