Comparative Study of Non-Isolated and Isolated Bridge with TCFP Bearing Under Spatially Varying Ground Motions

Yıl 2017, Cilt: 3 Sayı: 2, 29 - 32, 01.11.2017

Muhammet Yurdakul

Öz

In this study,
stochastic behaviours of non-isolated and isolated highway bridges under
spatially varying ground motion are examined. The triple concave friction
pendulum (TCFP) bearing is used as a seismic isolation system which is easy to
be manufactured and stand out against severe earthquake more than traditional
seismic isolation systems. The spatially varying earthquake ground motion model
includes wave-passage, incoherence and site-response effects. The incoherence
effect is examined by considering the Harichandran and Vanmarcke coherency
model. Soft and firm soil types are selected for considering the site-response
effect where the bridge supports are constructed. The mean of maximum element
forces and displacements of deck are examined in the study. Results from
stochastic analysis of isolated and non-isolated bridges subjected to spatially
varying ground motion are compared with each other for the special cases of the
ground motion model. It is observed from stochastic analysis that the TCFP
bearing decreases element forces of bridge deck by 61% to 93%. Also, it is
pointed out that increasing of difference between the soils types at support
points generally increase element forces and displacements.

Anahtar Kelimeler

Seismic isolation system, Triple concave friction

Kaynakça

• [1] Zayas, V.A., Low, S.S., Mahin, S.A. and Bozzo, L. (1989), “Feasibility and Performance Studies on İmproving The Earthquake Resistance of New Existing Building Using The Friction Pendulum System” In: Report No. UCB/EERC 89-09. Berkeley (CA): Earthquake Engineering and Research Center, College of Engineering, University of California.
• [2] Fenz, D.M. (2008), Development, Implementation and Verification of Dynamic Analysis Models for Multi-Spherical Sliding Bearings. Technical Report MCEER-08-0018, Multidisciplinary Center for Earthquake Engineering Research, University at Buffalo, State University of New York, Buffalo, NY
• [3] Tajammolian, H., Khoshnoudian, F., Talaei, S., and Loghman, V., “The Effects of Peak Ground Velocity of Near-Field Ground Motions on The Seismic Responses of Base-Isolated Structures Mounted on Friction Bearings”, Earthquakes and Structures,7(6)(2014)1259-1281 DOI:10.12989/eas.2014.7.6.1259
• [4] Loghman, V. and Khoshnoudian, F., “Comparison of Seismic Behavior of Long Period SDOF Systems Mounted on Friction Isolators Under Near-Field Earthquakes”, Smart Structures and Systems,16(4)(2015)701-723 DOI:10.12989/sss.2015.16.4.701
• [5] Fallahian, M., Khoshnoudian, F., and Loghman, V., “Torsionally Seismic Behavior of Triple Concave Friction Pendulum Bearing”, Advances in Structural Engineering, 18 (12) (2015) 2151-2166 DOI:10.1260/1369-4332.18.12.2151
• [6] Harichandran, R.S., and Wang, W. (1988), “Response of One-And Two-Span Beams To Spatially Varying Seismic Excitation”, Report to the National Science Foundation MSU-ENGR-88-002. Michigan (MI): Department of Civil and Environmental Engineering, College of Engineering, Michigan State University.
• [7] Ates, S., Bayraktar, A., and Dumanoglu, A. A., “The Effect of Spatially Varying Earthquake Ground Motions on The Stochastic Response of Bridges Isolated With Friction Pendulum Systems”, Soil Dynamics and Earthquake Engineering, 26(1) (2006) 31-44 DOI:10.1016/j.soildyn.2005.08.002
• [8] Ates, S., Soyluk, K., Dumanoglu, A. A., and Bayraktar, A., “Earthquake Response of Isolated Cable-Stayed Bridges Under Spatially Varying Ground Motions”, Structural Engineering and Mechanics,31(6)(2009)639-662 DOI:10.12989/sem.2009.31.6.639
• [9] Constantinou, M.C., Kalpakidis, I., Filiatrault A. and Ecker Lay, R.A., “Lrfd-Based Analysis and Design Procedures For Bridge”, Fabruary 28 (2011), Technical Rapor.