Reactive Compatibilization of Poly(lactic acid) and Polycarbonate Blends Through Catalytic Transesterification Reactions

Yıl 2019, Cilt: 5 Sayı: 2, 65 - 68, 31.07.2019

Guessoum Melia , Chelghoum Nadjat Haddaoui Nacerddine

https://doi.org/10.22399/ijcesen.478143

Cited By: 1

Öz

The combination of poly(lactic acid) (PLA) with
polycarbonate (PC) which presents high inherent thermal stability and
mechanical properties is an attractive strategy to overcome PLA brittleness and
poor thermal resistance. To improve affinity between the two materials and
their dispersion into the blend, an organophilic montmorillonite (MMT) has been
added and reactive compatibilization through catalyzed transesterification has
been investigated. The properties were studied using differential scanning
calorimetry (DSC), thermogravimetry (TG), dynamic mechanical analysis (DMA) and
scanning electron microscopy (SEM). The study of the thermal properties
revealed the immiscibility of the uncatalyzed blend but noticeable changes were
detected on the PLA crystallization and melting behaviors after the addition of
the catalyst. The SEM observations showed that MMT and the catalyst contribute
in the improvement of the dispersion. The TG results revealed that MMT
increases the thermal stability of the blend and showed new stages of
decomposition due to the different structures resulting from the interchange
reactions.

Anahtar Kelimeler

Transesterification, compatibilization, catalyst, nanocomposite

Kaynakça

• [1] Y. Chen, , Y. Peng, W. Liu, G. Zeng, J. Yang, X. Yan, The effect of various catalyzers on transesterification in reactive blending PC/PLA blends, Advanced Materials Research 741(2013) 24-27.DOI :10.4028/www.scientific.net/AMR.741.24
• [2] Y. Zhou, L. Luo, W. Liu, Y. Chen,Preparation and characteristic of PC/PLA/TPU blends by reactive extrusion, Advances in Materials Science and Engineering 6(2015) 1-9
• [3] C. Liu, S. Lin, C. Zhou, W. Yu, Influence of catalyst on transesterification between poly(lactic acid) and polycarbonate under flow field, Polymer 54(2013) 310-319.DOI: 10.1016/j.polymer.2012.11.047
• [4] V.T. Phuong, M.B. Coltelli, P. Cinelli, M. Cifelli, S. Verstichel, A. Lazzeri, Compatibilization and property enhancement of poly(lactic acid)/polycarbonate blends through triacetin-mediated interchange reactions in the melt, Polymer 55(2014)4498-4513.DOI:10.1016/j.polymer. 2014. 06.070
• [5] N. Chelghoum, M. Guessoum, M. Fois, N. Haddaoui, Contribution of catalytic transesterification reactions to the compatibilization of PLA/PC blends: thermal, morphological and viscoelastic characterization, Journal of Polymers and the Environment 26 (2018) 342-354. DOI: 10.1007/s10924-017-0950-4
• [6] Y. Wang, Q. Zhang, Q. Fu, Compatibilization of immiscible poly(propylene)/polystyrene blends using clay», Macromolecular rapid communications, 24(2003)231-235.DOI: 10.1002/marc.200390026
• [7] J. S. Hong, Y. K. Kim, K. H. Ahn, S. J. Lee, C. Kim,Interfacial tension reduction in PBT/PE/clay nanocomposite, Rheological Acta 46(2007)469-478.DOI:10.1007/s00397-006-0123-1
• [8] L. As’habi, S.H. Jafari, H.A. Khonakdar, R. Boldt, U. Wagenknecht, G. Heinrich, Tuning the processability, morphology and biodegradability of clay incorporated PLA/LLDPE blends via selective localization of nanoclay induced by melt mixing sequence. Express Polymer Letters. 7(2013) 21–39.DOI: 10.3144/expresspolymlett.2013.3