Research and application of DCA microspheres as deep profile control agent in low permeability reservoir

Yıl 2019, Cilt: 5 Sayı: 3, 131 - 134, 30.11.2019

Xuedong Shi , Xiang’an Yue Mingda Dong Changchun Yang

Öz

Many chemical
profile agents have been widely adopted to control water content. Polymer
microsphere is a new potential profile control technology developed rapidly in
recent years. According to the diameter of reservoir rock throat, the polymer
microspheres matching the throat diameter are prepared by nano-micron material
synthesis method. The mechanism of profile control is that the microspheres can
move freely in the porous media after entering the reservoir with injected
water. The polymer microspheres accumulate in the throat to block up and cause
resistance to the flow, so that the subsequent flow will turn around and flow
around. Because the microspheres have the certain degree of viscoelasticity,
the microspheres will be elastic deformation as the plugging pressure
difference increases to a certain extent. Then the polymer microspheres
continue to migrate deeply through the throat, so as to achieve step-by-step
deep profile control and flooding.

In this article, divinylbenzene-co-acrylamide microspheres (DCAMs) with different
particle size were firstly prepared by using dispersion polymerization. Then
their physical properties such as chemical structure, micromorphology, particle
size and size distribution, swelling property and stability were reseached. The
core displacement experiment under the simulated reservoir conditions was designed
to analyze the recovery and profile modification performance of DCAMs.

Anahtar Kelimeler

microspheres, low permeability

Kaynakça

• [1] Kudaykulov A, Zhumadillayeva A (2015) Numerical simulation of temperature distribution field in beam bulk in the simultaneous presence of heat insulation, heat flux and heat exchange (ICCESEN 2015), 14–19 October, Antalya-Turkey. https://doi.org/10.12693/APhysPolA.130.335 [2] Koru M, Serçe O (2014) Experimental and numerical determination of casting-mold interfacial heat transfer coefficient in the high pressure die casting of A-360 Aluminum. International Conference on Computational and Experimental Science and Engineering (ICCESEN 2014), Antalya-Turkey. https://doi.org/10.12693/APhysPolA.130.453[3] Er Z (2015) A study of evaluation of solar energy simulation and modeling systems (ICCESEN 2015), 4–19 October, Antalya-Turkey. https://doi.org/10.12693/APhysPolA.130.72[4] Liu J, Fan H, Zhu L, Tian D, Wen Z, Liu Y, Wang G (2017) Development of a transient method on predicting multi-annuli temperature of subsea wells. J Pet Sci Eng 157, 295–301[5] I. Akkurt, A. Elkhayat, The effect of barite proportion on neutron and gamma-ray shielding, Annals of Nuclear Energy 51 (2013) 5-9. DOI:10.1016/j.anucene.2012.08.026[6] I. Akkurt, Proc. International Conference on Computational and Experimental Science and Engineering (ICCESEN 2014), 24-29 October, 2014 Antalya-Turkey
• Koru M, Serçe O (2014) Experimental and numerical determination of casting-mold interfacial heat transfer coefficient in the high pressure die casting of A-360 Aluminum. International Conference on Computational and Experimental Science and Engineering (ICCESEN 2014), Antalya-Turkey
• A study of evaluation of solar energy simulation and modeling systems
• Liu J, Fan H, Zhu L, Tian D, Wen Z, Liu Y, Wang G (2017) Development of a transient method on predicting multi-annuli temperature of subsea wells. J Pet Sci Eng 157, 295–301
• I. Akkurt, A. Elkhayat, The effect of barite proportion on neutron and gamma-ray shielding, Annals of Nuclear Energy 51 (2013) 5-9.
• I. Akkurt, Proc. International Conference on Computational and Experimental Science and Engineering (ICCESEN 2014), 24-29 October, 2014 Antalya-Turkey