Comparison of Mechanical Properties of Gypsum with and without Polypropylene Fibers

Yıl 2021, Cilt: 7 Sayı: 2, 57 - 60, 31.07.2021

Xheneta Xengo Bashkim Ziberi Naim Syla

https://doi.org/10.22399/ijcesen.798867

Cited By: 1

Öz

Gypsum is a mineral belonging to the group of sulfates, i.e., sulfuric acid, which is often found in Earth's crust. In this paper, two main types of gypsum, gypsum α and gypsum β, with different water content were prepared. Samples with and without polypropylene fibers, with different fiber content and different fiber lengths during preparation, produced in a gypsum factory located in the Debar region, North Macedonia, were studied. Physical properties such as density, porosity, water absorption capability and their kinetics, packing factor, hardening and others were examined using different methods. The main goal of this paper was the determination of mechanical properties of gypsum such as the compressive and flexure strength and the module of elasticity of the gypsum prisms. For the determination of elastic properties, the nondestructive method of ultrasound testing was used. In this test, the strength and quality of a prism is assessed by measuring the velocity of an ultrasonic pulse passing through a gypsum structure. This test is conducted by passing a pulse of ultrasonic wave through a prism and by measuring the time taken by the pulse to get through the structure. Higher velocities indicate good quality and continuity of the material, while slower velocities may indicate gypsum with many cracks or voids. The comparison of the obtained results from these two types of gypsum shows different mechanical and other physical properties.

Anahtar Kelimeler

gypsum, polypropylene, fibers

Kaynakça

• [1]. F. E. S. S. L. L. P. J. Nilsson M, "Characterization of a novel calciumphosphate/sulphate bone cement," Journal of biomedical materials research , 2002
• [2]. J. A. D. M. Gladis Camarini, "Gypsum hemihydrate-cement lends to improve renderings durability," Construction and Building Materials 25, 2011.
• [3]. D. POWELL, "The α- and β-Forms of Calcium Sulphate Hemihydrate," Nature , pp. 185, 375–376, 1960.
• [4]. D. Ensiminger, Ultrasonic: fundamentals, technology, application, New York: Marcel Dekker, INC., 1988
• [5]. K. Krautkramer, "Ultrasonic Testing of Materials," Springer-Verlag, 1969.
• [6]. J. S. a. C. A. K.K. Kelley, Thermodynamic Properties of Gypsum and its Dehydration Products, Washington: Pp. iv. 73, 1941
• [7]. S. T. R. P. AN. Kannappan, "ELASTIC AND MECHANICAL PROPERTIES OF GLASS SPECIMEN," ARPN Journal of Engineering and Applied Sciences , pp. 27-31, 2009
• [8]. C. N. a. S. Sertb, "Use of Basalt Fibers for Soil Improvement," ACTA PHYSICA POLONICA A, vol. 130, no. Special issue of the 2nd International Conference on Computational and Experimental Science and Engineering (ICCESEN 2015), p. 355, 2016
• [9]. Ş. K. M. K. F. T. M. Davraza, "Investigation of Relationships between Ultrasonic Pulse Velocity and Thermal Conductivity Coefficient in Foam Concretes," ACTA PHYSICA POLONICA A, vol. 130, p. 469, 2016
• [10]. M. O. A. M. N. Ozsoy, "Mechanical Properties of Chopped Carbon Fiber Reinforced Epoxy Composites," ACTA PHYSICA POLONICA A, vol. 130, p. 297, 2016.
• [11]. N. T. E. K. A. S. D. E. S. A. I. Bozyigit, "Dynamic Behavior of a Clayey Sand Reinforced with Polypropylene Fiber," ACTA PHYSICA POLONICA A, vol. 132, p. 674, 2017
• [12]. Ş. Y. A. S. G.İ. Sezer, "Dependence of Impact Resistance of Steel Fiber Reinforced Concrete on Aggregate Origin," ACTA PHYSICA POLONICA A, vol. 128, pp. B-37, 2015
• [13]. P. M. M. Soni Hargovind, "Effects on microstructure and material properties of TiNiCo shape memory alloys," Emerging Materials Research, vol. 9, no. 2, 2020 [14]. A. Arabacı, "Effect of the calcination temperature on the properties of Sm-doped CeO2," Emerging Materials Research, vol. 9, no. 2, 2020.
• [15].M. Y. Kutlay Sever, "No AccessEvaluation of Mechanical and Thermal Properties of Artichoke Filled Polypropylene Composites: Influence of Wollastonite Hybridization," Emerging Materials Research, vol. 9, no. 2, 2020.
• [16]. P. J. M. N. Mohan Kumar, "Influence of glutaraldehyde on dynamic properties of poly(vinyl alcohol) polymer," Emerging Materials Research, vol. 9, no. 1, 2020.