The Effect of Marble Powder Additive at Different Ratios on the Radiation Absorption Parameters of Barite Based Concretes

Yıl 2023, Cilt: 9 Sayı: 4, 376 - 381, 31.12.2023

Yasemin Savaş , Boğaçhan Başaran , Betül Çetin

Öz

This article contains the results of an experimental study to investigate the radiation shielding effect as a result of adding crushed marble powder at different rates to barite-based concretes. The mixtures of the produced concretes were calculated according to TS 802. In 1st group concretes formed by 9x9x9 cm sized cube samples, cement and aggregate ratio were kept constant and marble and barite ratios were changed. In the 2nd group concretes, the cement and barite ratio were kept constant and the marble and aggregate ratios were changed. The linear attenuation coefficients have been measured at 1773 and 1332 keV for samples using a gamma spectrometer that contains a 3”x3” NaI(Tl) detector and connected to Multi-Channel Analyzer (MCA). Also, the correlation between linear attenuation coefficients and marble doped% for the photon energies was calculated and R2 was found to be 0.90 and above for all samples. In addition, this results have been used to calculate the half value layer (HVL) and mean free path (mfp) parameters.
This study shows that the added of crushed marble powder contributes positively to the radiation absorption properties of barite added to concrete.

Anahtar Kelimeler

marble powder , gamma spectrometer , barite concrete , radiation shielding

Kaynakça

• [1] Çetin, T. (2003). Marble Potential, Production and Export of Turkey. Gazi Üniversitesi Gazi Eğitim Fakültesi Dergisi, 23 (3), 243-256.
• [2] Akkurt, I., Basyigit, C., Kılıncaslan, S., Mavi, B., (2005). The shielding of g-rays by concretes produced with barite. Progress in Nuclear Energy, 46, 1-11.
• [3] Demir, T. & Alyamaç, K. E. (2022). Investigation of the Use of Marble Powder in Production of High Strength Concretes. Open Journal of Nano, 7 (1) , 18-25. DOI: 10.56171/ojn.1034691
• [4] Ashish, D. K. (2019). Concrete made with waste marble powder and supplementary cementitious material for sustainable development. J. Clean. Prod., 211, 716–729.
• [5] Terzi, S. & Karaşahin, M. (2003). Mermer Toz Atıklarının Asfalt Betonu Karışımında Filler Malzemesi Olarak Kullanımı . Teknik Dergi , 14 (67).
• [6] Gülan, L., Yıldız, S. & Keleştemur, O. (2016). Atık Mermer Tozu ve Cam Lif Katkılı Betonun Mekanik ve Fiziksel Özellikleri Üzerine Karbonatlaşmanın Etkisi. Fırat Üniversitesi Mühendislik Bilimleri Dergisi, 28 (2), 189-200.
• [7] Yazicioğlu, S. & Kara, C. (2017). Effects of Using Waste Marble Dust in Concrete to Carbonation. Journal of Polytechnic, 20 (2), 369-376.
• [8] Şenol, A. F. & Karakurt, C. (2023, February 18-21). Atık Mermer Tozunun Çimento Harçlarının Dayanım Özelliklerine Etkisi, 1st International Conference on Frontiers in Academic Research, Konya, Turkey https://www.icfarconf.com/
• [9] Türk Standartları Enstitüsü (TSE). (2016). TS 802 Beton Karışım Tasarımı Hesap Esasları. Ankara.
• [10] EN 12390-2:2009 (2009). Testing hardened concrete - Part 2: Making and curing specimens for strength tests.
• [11] Çetin, B., Oner, F., Akkurt, I., (2016). Determination of Natural Radioactivity And Associated Radiological Hazard In Excavation Field In Turkey (Oluz Höyük). Acta Physica Polonica A, 130(1), 475-478.
• [12] Mavi, B., (2012). Experimental investigation of γ-ray attenuation coefficients for granites. Annals of Nuclear Energy, 44, 22-25.
• [13]Akkurt, I.,Akyıldırım, H., Mavi, B., Kılıncaslan, S., Basyigit, C., (2010). Photon attenuation coefficients of concrete includes barite in different rate, Annals of Nuclear Energy, 37, 910-914.